1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca956x.dtsi"
10 compatible = "tplink,archer-c25-v1", "qca,qca9561";
11 model = "TP-Link Archer C25 v1";
14 bootargs = "console=ttyS0,115200n8";
18 led-boot = &led_power;
19 led-failsafe = &led_power;
20 led-running = &led_power;
21 led-upgrade = &led_power;
22 label-mac-device = ð0;
26 compatible = "spi-gpio";
30 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
31 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
32 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
33 num-chipselects = <1>;
35 led_gpio: led_gpio@0 {
36 compatible = "fairchild,74hc595";
40 registers-number = <1>;
41 spi-max-frequency = <10000000>;
46 compatible = "gpio-keys";
49 label = "WiFi button";
50 linux,code = <KEY_RFKILL>;
51 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
55 label = "Reset button";
56 linux,code = <KEY_RESTART>;
57 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
62 compatible = "gpio-leds";
65 label = "tp-link:green:power";
66 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
71 label = "tp-link:green:wps";
72 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
76 label = "tp-link:green:wlan2g";
77 gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
78 linux,default-trigger = "phy1tpt";
82 label = "tp-link:green:wlan5g";
83 gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
84 linux,default-trigger = "phy0tpt";
88 label = "tp-link:green:wan";
89 gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
93 label = "tp-link:amber:wan";
94 gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
98 label = "tp-link:green:lan1";
99 gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
103 label = "tp-link:green:lan2";
104 gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
108 label = "tp-link:green:lan3";
109 gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
113 label = "tp-link:green:lan4";
114 gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
125 compatible = "jedec,spi-nor";
127 spi-max-frequency = <25000000>;
130 compatible = "fixed-partitions";
131 #address-cells = <1>;
135 label = "factory-boot";
136 reg = <0x000000 0x020000>;
142 reg = <0x020000 0x010000>;
147 compatible = "denx,uimage";
149 reg = <0x030000 0x7a0000>;
152 config: partition@7d0000 {
154 reg = <0x7d0000 0x010000>;
158 info: partition@7e0000 {
160 reg = <0x7e0000 0x010000>;
164 art: partition@7f0000 {
166 reg = <0x7f0000 0x010000>;
184 phy-handle = <&swphy4>;
186 mtd-mac-address = <&info 0x8>;
192 mtd-mac-address = <&info 0x8>;
193 mtd-mac-address-increment = <1>;
199 mtd-cal-data = <&art 0x1000>;
200 mtd-mac-address = <&info 0x8>;