1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca956x.dtsi"
10 compatible = "tplink,archer-c25-v1", "qca,qca9561";
11 model = "TP-Link Archer C25 v1";
14 bootargs = "console=ttyS0,115200n8";
18 compatible = "spi-gpio";
22 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
23 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
24 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
25 num-chipselects = <1>;
27 led_gpio: led_gpio@0 {
28 compatible = "fairchild,74hc595";
32 registers-number = <1>;
33 spi-max-frequency = <10000000>;
38 compatible = "gpio-keys";
41 label = "WiFi button";
42 linux,code = <KEY_RFKILL>;
43 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
47 label = "Reset button";
48 linux,code = <KEY_RESTART>;
49 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
55 led-failsafe = &power;
61 compatible = "gpio-leds";
64 label = "tp-link:green:power";
65 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
70 label = "tp-link:green:wps";
71 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
75 label = "tp-link:green:wlan2g";
76 gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
77 linux,default-trigger = "phy1tpt";
81 label = "tp-link:green:wlan5g";
82 gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
83 linux,default-trigger = "phy0tpt";
87 label = "tp-link:green:wan";
88 gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
92 label = "tp-link:amber:wan";
93 gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
97 label = "tp-link:green:lan1";
98 gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
102 label = "tp-link:green:lan2";
103 gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
107 label = "tp-link:green:lan3";
108 gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
112 label = "tp-link:green:lan4";
113 gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
123 compatible = "jedec,spi-nor";
125 spi-max-frequency = <25000000>;
128 compatible = "fixed-partitions";
129 #address-cells = <1>;
133 label = "factory-boot";
134 reg = <0x000000 0x020000>;
140 reg = <0x020000 0x010000>;
145 compatible = "denx,uimage";
147 reg = <0x030000 0x7a0000>;
150 config: partition@7d0000 {
152 reg = <0x7d0000 0x010000>;
156 info: partition@7e0000 {
158 reg = <0x7e0000 0x010000>;
162 art: partition@7f0000 {
164 reg = <0x7f0000 0x010000>;
181 phy-handle = <&swphy4>;
184 mtd-mac-address = <&info 0x8>;
189 mtd-mac-address = <&info 0x8>;
190 mtd-mac-address-increment = <1>;
195 mtd-cal-data = <&art 0x1000>;
196 mtd-mac-address = <&info 0x8>;