1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca956x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "COMFAST CF-E375AC";
10 compatible = "comfast,cf-e375ac", "qca,qca9563";
13 label-mac-device = ð0;
15 led-failsafe = &led_lan;
16 led-running = &led_lan;
17 led-upgrade = &led_lan;
21 compatible = "gpio-leds";
25 gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
30 gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
34 label = "blue:wlan2g";
35 gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
36 linux,default-trigger = "phy1tpt";
41 compatible = "gpio-keys";
44 linux,code = <KEY_RESTART>;
45 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
46 debounce-interval = <60>;
51 compatible = "linux,wdt-gpio";
53 gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
64 compatible = "qcom,ath10k";
65 reg = <0x0000 0 0 0 0>;
66 nvmem-cells = <&precal_art_5000>, <&macaddr_art_0 2>;
67 nvmem-cell-names = "pre-calibration", "mac-address";
75 compatible = "jedec,spi-nor";
77 spi-max-frequency = <25000000>;
80 compatible = "fixed-partitions";
86 reg = <0x000000 0x040000>;
90 art: partition@40000 {
92 reg = <0x040000 0x010000>;
96 compatible = "fixed-layout";
100 macaddr_art_0: macaddr@0 {
101 compatible = "mac-base";
103 #nvmem-cell-cells = <1>;
106 precal_art_5000: pre-calibration@5000 {
107 reg = <0x5000 0x2f20>;
113 compatible = "denx,uimage";
115 reg = <0x050000 0xfa0000>;
119 label = "art-backup";
120 reg = <0xff0000 0x010000>;
130 phy0: ethernet-phy@0 {
133 qca,mib-poll-interval = <500>;
135 qca,ar8327-initvals = <
136 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
137 0x7c 0x0000007e /* PORT0_STATUS */
145 pll-data = <0x03000101 0x00000101 0x00001919>;
148 nvmem-cells = <&macaddr_art_0 0>;
149 nvmem-cell-names = "mac-address";
150 phy-handle = <&phy0>;
156 mtd-cal-data = <&art 0x1000>;
157 nvmem-cells = <&macaddr_art_0 10>;
158 nvmem-cell-names = "mac-address";