target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca9563_dlink_dir-8x9-a1.dtsi"
   4
   5 #include <dt-bindings/leds/common.h>
   6
   7 / {
   8         compatible = "dlink,dir-859-a3", "qca,qca9563";
   9         model = "D-Link DIR-859 A3";
  10
  11         aliases {
  12                 label-mac-device = &wmac;
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_power: power {
  23                         color = <LED_COLOR_ID_GREEN>;
  24                         function = LED_FUNCTION_POWER;
  25                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 wan {
  29                         color = <LED_COLOR_ID_GREEN>;
  30                         function = LED_FUNCTION_WAN;
  31                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 wlan {
  35                         color = <LED_COLOR_ID_GREEN>;
  36                         function = LED_FUNCTION_WLAN;
  37                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 wps {
  42                         color = <LED_COLOR_ID_GREEN>;
  43                         function = LED_FUNCTION_WPS;
  44                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  45                 };
  46         };
  47 };
  48
  49 &ath10k {
  50         nvmem-cells = <&calibration_ath10k>, <&macaddr_bdcfg_ethaddr 2>;
  51         nvmem-cell-names = "calibration", "mac-address";
  52 };
  53
  54 &bdcfg {
  55         macaddr_bdcfg_ethaddr: ethaddr {
  56                 #nvmem-cell-cells = <1>;
  57         };
  58 };
  59
  60 &wmac {
  61         nvmem-cells = <&calibration_ath9k>, <&macaddr_bdcfg_ethaddr 0>;
  62         nvmem-cell-names = "calibration", "mac-address";
  63 };