target/linux/ath79/dts/qca9563_tplink_archer-a7-v5.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca9563_tplink_archer-x7-v5.dtsi"
   4
   5 / {
   6         compatible = "tplink,archer-a7-v5", "qca,qca9563";
   7         model = "TP-Link Archer A7 v5";
   8
   9         aliases {
  10                 label-mac-device = &eth0;
  11         };
  12 };
  13
  14 &keys {
  15         reset {
  16                 label = "Reset button";
  17                 linux,code = <KEY_RESTART>;
  18                 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  19                 debounce-interval = <60>;
  20         };
  21 };
  22
  23 &mtdparts {
  24         partition@0 {
  25                 label = "factory-uboot";
  26                 reg = <0x000000 0x020000>;
  27                 read-only;
  28         };
  29
  30         uboot: partition@20000 {
  31                 label = "u-boot";
  32                 reg = <0x020000 0x020000>;
  33                 read-only;
  34         };
  35
  36         partition@40000 {
  37                 label = "firmware";
  38                 reg = <0x040000 0xec0000>;
  39                 compatible = "denx,uimage";
  40         };
  41
  42         info: partition@f40000 {
  43                 label = "info";
  44                 reg = <0xf40000 0x020000>;
  45                 read-only;
  46
  47                 nvmem-layout {
  48                         compatible = "fixed-layout";
  49                         #address-cells = <1>;
  50                         #size-cells = <1>;
  51
  52                         macaddr_info_8: macaddr@8 {
  53                                 reg = <0x8 0x6>;
  54                         };
  55                 };
  56         };
  57
  58         config: partition@f60000 {
  59                 label = "config";
  60                 reg = <0xf60000 0x050000>;
  61                 read-only;
  62         };
  63
  64         partition@fc0000 {
  65                 label = "partition-table";
  66                 reg = <0xfc0000 0x010000>;
  67                 read-only;
  68         };
  69
  70         art: partition@ff0000 {
  71                 label = "art";
  72                 reg = <0xff0000 0x010000>;
  73                 read-only;
  74         };
  75 };
  76
  77 &eth0 {
  78         nvmem-cells = <&macaddr_info_8>;
  79         nvmem-cell-names = "mac-address";
  80 };
  81
  82 &wmac {
  83         mtd-cal-data = <&art 0x1000>;
  84
  85         nvmem-cells = <&macaddr_info_8>;
  86         nvmem-cell-names = "mac-address";
  87 };