1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca956x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "tplink,eap245-v3", "qca,qca9563";
10 model = "TP-Link EAP245 v3";
13 led-boot = &led_status_green;
14 led-failsafe = &led_status_amber;
15 led-running = &led_status_green;
16 led-upgrade = &led_status_amber;
17 label-mac-device = ð0;
21 compatible = "gpio-leds";
23 led_status_green: status_green {
24 label = "green:status";
25 gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
29 led_status_amber: status_amber {
30 label = "amber:status";
31 gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
36 compatible = "gpio-keys";
39 label = "Reset button";
40 linux,code = <KEY_RESTART>;
41 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
42 debounce-interval = <60>;
59 compatible = "jedec,spi-nor";
61 spi-max-frequency = <25000000>;
64 compatible = "fixed-partitions";
69 label = "factory-boot";
70 reg = <0x000000 0x040000>;
76 reg = <0x040000 0x040000>;
81 label = "partition-table";
82 reg = <0x080000 0x010000>;
86 info: partition@90000 {
88 reg = <0x090000 0x010000>;
92 art: partition@a0000 {
94 reg = <0x0a0000 0x010000>;
100 reg = <0x0b0000 0x010000>;
105 compatible = "openwrt,elf";
107 reg = <0x0c0000 0xe40000>;
112 reg = <0xf00000 0x030000>;
118 reg = <0xf30000 0x080000>;
124 reg = <0xfb0000 0x040000>;
136 phy0: ethernet-phy@0 {
139 qca,ar8327-initvals = <
140 0x04 0x00080080 /* PAD0 */
141 0x7c 0x0000007e /* PORT0_STATUS */
142 0xe0 0xc74164de /* SGMII_CTRL */
150 phy-handle = <&phy0>;
153 mtd-mac-address = <&info 0x8>;
159 mtd-cal-data = <&art 0x1000>;
160 mtd-mac-address = <&info 0x8>;