1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca956x.dtsi"
10 compatible = "ubnt,ubnt-unifiac-lite", "qca,qca9563";
11 model = "Ubiquiti UniFi-AC-LITE/MESH/LR";
14 bootargs = "console=ttyS0,115200n8";
18 compatible = "gpio-leds";
21 label = "ubnt:white:dome";
22 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
23 default-state = "off";
24 linux,default-trigger = "phy0tpt";
28 label = "ubnt:blue:dome";
29 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
30 default-state = "off";
31 linux,default-trigger = "phy1tpt";
37 compatible = "gpio-keys";
42 label = "Reset button";
43 linux,code = <KEY_RESTART>;
44 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
45 debounce-interval = <60>;
69 compatible = "jedec,spi-nor";
71 spi-max-frequency = <25000000>;
74 compatible = "fixed-partitions";
80 reg = <0x000000 0x060000>;
86 reg = <0x060000 0x010000>;
92 reg = <0x070000 0x790000>;
97 reg = <0x800000 0x790000>;
103 reg = <0xf90000 0x020000>;
109 reg = <0xfb0000 0x040000>;
113 eeprom: partition@ff0000 {
115 reg = <0xff0000 0x010000>;
126 phy4: ethernet-phy@4 {
135 mtd-mac-address = <&eeprom 0x0>;
136 phy-handle = <&phy4>;
141 mtd-cal-data = <&eeprom 0x1000>;
142 mtd-mac-address = <&eeprom 0x0>;