1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca956x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 label-mac-device = ð0;
14 compatible = "gpio-keys";
17 linux,code = <KEY_RESTART>;
18 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
19 debounce-interval = <60>;
27 pll-data = <0x03000101 0x00000101 0x00001919>;
29 mtd-mac-address = <&art 0x0>;
39 phy0: ethernet-phy@0 {
43 qca,ar8327-initvals = <
44 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
45 0x10 0x81000080 /* POWER_ON_STRAP */
46 0x50 0xcf37cf37 /* LED_CTRL0 */
47 0x54 0xcf37cf37 /* LED_CTRL1 */
48 0x58 0xcf37cf37 /* LED_CTRL2 */
49 0x5c 0x0000c300 /* LED_CTRL3 */
50 0x7c 0x0000007e /* PORT0_STATUS */
59 compatible = "pci168c,0056";
60 reg = <0x0000 0 0 0 0>;
68 compatible = "jedec,spi-nor";
70 spi-max-frequency = <25000000>;
73 compatible = "fixed-partitions";
79 reg = <0x000000 0x040000>;
85 reg = <0x040000 0x010000>;
89 compatible = "denx,uimage";
91 reg = <0x050000 0xfa0000>;
94 art: partition@ff0000 {
96 reg = <0xff0000 0x010000>;
110 mtd-cal-data = <&art 0x1000>;