target/linux/ath79/image/nand.mk

   1 define Build/dongwon-header
   2         head -c 4 $@ > $@.tmp
   3         head -c 8 /dev/zero >> $@.tmp
   4         tail -c +9 $@ >> $@.tmp
   5         ( \
   6                 header_crc="$$(head -c 68 $@.tmp | gzip -c | \
   7                         tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
   8                 printf "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
   9                         dd of=$@.tmp bs=4 count=1 seek=1 conv=notrunc \
  10         )
  11         mv $@.tmp $@
  12 endef
  13
  14 # attention: only zlib compression is allowed for the boot fs
  15 define Build/zyxel-buildkerneljffs
  16         mkdir -p $@.tmp/boot
  17         cp $@ $@.tmp/boot/vmlinux.lzma.uImage
  18         $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
  19                 --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
  20                 -o $@ \
  21                 -d $@.tmp
  22         rm -rf $@.tmp
  23 endef
  24
  25 define Build/zyxel-factory
  26         let \
  27                 maxsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \
  28                 let size="$$(stat -c%s $@)"; \
  29                 if [ $$size -lt $$maxsize ]; then \
  30                         $(STAGING_DIR_HOST)/bin/mkrasimage \
  31                                 -b $(RAS_BOARD) \
  32                                 -v $(RAS_VERSION) \
  33                                 -r $@ \
  34                                 -s $$maxsize \
  35                                 -o $@.new \
  36                                 -l 131072 \
  37                         && mv $@.new $@ ; \
  38                 fi
  39 endef
  40
  41 define Device/8dev_rambutan
  42   SOC := qca9557
  43   DEVICE_VENDOR := 8devices
  44   DEVICE_MODEL := Rambutan
  45   DEVICE_PACKAGES := kmod-usb2
  46   BLOCKSIZE := 128k
  47   PAGESIZE := 2048
  48   KERNEL_SIZE := 4096k
  49   KERNEL_IN_UBI := 1
  50   IMAGES := factory.bin sysupgrade.tar
  51   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
  52   IMAGE/factory.bin := append-ubi
  53 endef
  54 TARGET_DEVICES += 8dev_rambutan
  55
  56 define Device/aerohive_hiveap-121
  57   SOC := ar9344
  58   DEVICE_VENDOR := Aerohive
  59   DEVICE_MODEL := HiveAP 121
  60   DEVICE_PACKAGES := kmod-usb2
  61   BLOCKSIZE := 128k
  62   PAGESIZE := 2048
  63   IMAGE_SIZE := 116m
  64   KERNEL_SIZE := 5120k
  65   UBINIZE_OPTS := -E 5
  66   SUPPORTED_DEVICES += hiveap-121
  67   IMAGES += factory.bin
  68   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
  69         check-size
  70   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  71 endef
  72 TARGET_DEVICES += aerohive_hiveap-121
  73
  74 define Device/domywifi_dw33d
  75   SOC := qca9558
  76   DEVICE_VENDOR := DomyWifi
  77   DEVICE_MODEL := DW33D
  78   DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport \
  79         kmod-ath10k-ct ath10k-firmware-qca988x-ct
  80   KERNEL_SIZE := 5120k
  81   IMAGE_SIZE := 98304k
  82   BLOCKSIZE := 128k
  83   PAGESIZE := 2048
  84   UBINIZE_OPTS := -E 5
  85   IMAGES += factory.bin
  86   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  87   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
  88         check-size
  89 endef
  90 TARGET_DEVICES += domywifi_dw33d
  91
  92 define Device/dongwon_dw02-412h
  93   SOC := qca9557
  94   DEVICE_VENDOR := Dongwon T&I
  95   DEVICE_MODEL := DW02-412H
  96   DEVICE_ALT0_VENDOR := KT
  97   DEVICE_ALT0_MODEL := GiGA WiFi home
  98   DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
  99   KERNEL_SIZE := 8192k
 100   BLOCKSIZE := 128k
 101   PAGESIZE := 2048
 102   KERNEL := $$(KERNEL) | dongwon-header
 103   KERNEL_INITRAMFS := $$(KERNEL)
 104   UBINIZE_OPTS := -E 5
 105   IMAGES += factory.img
 106   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 107         check-size
 108   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 109 endef
 110
 111 define Device/dongwon_dw02-412h-64m
 112   $(Device/dongwon_dw02-412h)
 113   DEVICE_VARIANT := (64M)
 114   DEVICE_ALT0_VARIANT := (64M)
 115   IMAGE_SIZE := 49152k
 116 endef
 117 TARGET_DEVICES += dongwon_dw02-412h-64m
 118
 119 define Device/dongwon_dw02-412h-128m
 120   $(Device/dongwon_dw02-412h)
 121   DEVICE_VARIANT := (128M)
 122   DEVICE_ALT0_VARIANT := (128M)
 123   IMAGE_SIZE := 114688k
 124 endef
 125 TARGET_DEVICES += dongwon_dw02-412h-128m
 126
 127 define Device/glinet_gl-ar300m-common-nand
 128   SOC := qca9531
 129   DEVICE_VENDOR := GL.iNet
 130   DEVICE_MODEL := GL-AR300M
 131   DEVICE_PACKAGES := kmod-usb2
 132   KERNEL_SIZE := 4096k
 133   IMAGE_SIZE := 16000k
 134   PAGESIZE := 2048
 135   VID_HDR_OFFSET := 2048
 136 endef
 137
 138 define Device/glinet_gl-ar300m-nand
 139   $(Device/glinet_gl-ar300m-common-nand)
 140   DEVICE_VARIANT := NAND
 141   BLOCKSIZE := 128k
 142   IMAGES += factory.img
 143   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 144   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 145   SUPPORTED_DEVICES += glinet,gl-ar300m-nor
 146 endef
 147 TARGET_DEVICES += glinet_gl-ar300m-nand
 148
 149 define Device/glinet_gl-ar300m-nor
 150   $(Device/glinet_gl-ar300m-common-nand)
 151   DEVICE_VARIANT := NOR
 152   SUPPORTED_DEVICES += glinet,gl-ar300m-nand gl-ar300m
 153 endef
 154 TARGET_DEVICES += glinet_gl-ar300m-nor
 155
 156 define Device/glinet_gl-ar750s-common
 157   SOC := qca9563
 158   DEVICE_VENDOR := GL.iNet
 159   DEVICE_MODEL := GL-AR750S
 160   DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 \
 161         kmod-usb-storage block-mount
 162   IMAGE_SIZE := 16000k
 163 endef
 164
 165 define Device/glinet_gl-ar750s-nor-nand
 166   $(Device/glinet_gl-ar750s-common)
 167   DEVICE_VARIANT := NOR/NAND
 168   KERNEL_SIZE := 4096k
 169   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 170   SUPPORTED_DEVICES += glinet,gl-ar750s-nor
 171 endef
 172 TARGET_DEVICES += glinet_gl-ar750s-nor-nand
 173
 174 define Device/glinet_gl-ar750s-nor
 175   $(Device/glinet_gl-ar750s-common)
 176   DEVICE_VARIANT := NOR
 177   SUPPORTED_DEVICES += gl-ar750s glinet,gl-ar750s glinet,gl-ar750s-nor-nand
 178 endef
 179 TARGET_DEVICES += glinet_gl-ar750s-nor
 180
 181 define Device/glinet_gl-e750
 182   SOC := qca9531
 183   DEVICE_VENDOR := GL.iNet
 184   DEVICE_MODEL := GL-E750
 185   DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2
 186   SUPPORTED_DEVICES += gl-e750
 187   KERNEL_SIZE := 4096k
 188   IMAGE_SIZE := 131072k
 189   PAGESIZE := 2048
 190   VID_HDR_OFFSET := 2048
 191   BLOCKSIZE := 128k
 192   IMAGES += factory.img
 193   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 194   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 195 endef
 196 TARGET_DEVICES += glinet_gl-e750
 197
 198 define Device/glinet_gl-xe300
 199   SOC := qca9531
 200   DEVICE_VENDOR := GL.iNet
 201   DEVICE_MODEL := GL-XE300
 202   DEVICE_PACKAGES := kmod-usb2 block-mount kmod-usb-serial-ch341 \
 203         kmod-usb-net-qmi-wwan uqmi
 204   KERNEL_SIZE := 4096k
 205   IMAGE_SIZE := 131072k
 206   PAGESIZE := 2048
 207   VID_HDR_OFFSET := 2048
 208   BLOCKSIZE := 128k
 209   IMAGES += factory.img
 210   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 211   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 212 endef
 213 TARGET_DEVICES += glinet_gl-xe300
 214
 215 define Device/linksys_ea4500-v3
 216   SOC := qca9558
 217   DEVICE_VENDOR := Linksys
 218   DEVICE_MODEL := EA4500
 219   DEVICE_VARIANT := v3
 220   DEVICE_PACKAGES := kmod-usb2
 221   BLOCKSIZE := 128k
 222   PAGESIZE := 2048
 223   KERNEL_SIZE := 4096k
 224   IMAGE_SIZE := 81920k
 225   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 226   LINKSYS_HWNAME := EA4500V3
 227   IMAGES += factory.img
 228   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
 229         append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
 230   UBINIZE_OPTS := -E 5
 231 endef
 232 TARGET_DEVICES += linksys_ea4500-v3
 233
 234 # fake rootfs is mandatory, pad-offset 64 equals (1 * uimage_header)
 235 define Device/netgear_ath79_nand
 236   DEVICE_VENDOR := NETGEAR
 237   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
 238   KERNEL_SIZE := 4096k
 239   BLOCKSIZE := 128k
 240   PAGESIZE := 2048
 241   IMAGE_SIZE := 25600k
 242   KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
 243         pad-offset $$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem $$(UIMAGE_MAGIC)
 244   IMAGES := sysupgrade.bin factory.img
 245   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
 246         append-ubi | check-size | netgear-dni
 247   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 248   UBINIZE_OPTS := -E 5
 249 endef
 250
 251 define Device/netgear_pgzng1
 252   SOC := ar9344
 253   DEVICE_MODEL := PGZNG1
 254   DEVICE_VENDOR := NETGEAR
 255   DEVICE_ALT0_MODEL := Pulse Gateway
 256   DEVICE_ALT0_VENDOR := ADT
 257   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-i2c-gpio \
 258     kmod-leds-pca955x kmod-rtc-isl1208 kmod-spi-dev
 259   KERNEL_SIZE := 5120k
 260   IMAGE_SIZE := 83968k
 261   PAGESIZE := 2048
 262   BLOCKSIZE := 128k
 263   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 264 endef
 265 TARGET_DEVICES += netgear_pgzng1
 266
 267 define Device/netgear_r6100
 268   SOC := ar9344
 269   DEVICE_MODEL := R6100
 270   UIMAGE_MAGIC := 0x36303030
 271   NETGEAR_BOARD_ID := R6100
 272   NETGEAR_HW_ID := 29764434+0+128+128+2x2+2x2
 273   $(Device/netgear_ath79_nand)
 274   DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
 275 endef
 276 TARGET_DEVICES += netgear_r6100
 277
 278 define Device/netgear_wndr3700-v4
 279   SOC := ar9344
 280   DEVICE_MODEL := WNDR3700
 281   DEVICE_VARIANT := v4
 282   UIMAGE_MAGIC := 0x33373033
 283   NETGEAR_BOARD_ID := WNDR3700v4
 284   NETGEAR_HW_ID := 29763948+128+128
 285   $(Device/netgear_ath79_nand)
 286 endef
 287 TARGET_DEVICES += netgear_wndr3700-v4
 288
 289 define Device/netgear_wndr4300
 290   SOC := ar9344
 291   DEVICE_MODEL := WNDR4300
 292   UIMAGE_MAGIC := 0x33373033
 293   NETGEAR_BOARD_ID := WNDR4300
 294   NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
 295   $(Device/netgear_ath79_nand)
 296 endef
 297 TARGET_DEVICES += netgear_wndr4300
 298
 299 define Device/netgear_wndr4300sw
 300   SOC := ar9344
 301   DEVICE_MODEL := WNDR4300SW
 302   UIMAGE_MAGIC := 0x33373033
 303   NETGEAR_BOARD_ID := WNDR4300SW
 304   NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
 305   $(Device/netgear_ath79_nand)
 306 endef
 307 TARGET_DEVICES += netgear_wndr4300sw
 308
 309 define Device/netgear_wndr4300tn
 310   SOC := ar9344
 311   DEVICE_MODEL := WNDR4300TN
 312   UIMAGE_MAGIC := 0x33373033
 313   NETGEAR_BOARD_ID := WNDR4300TN
 314   NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
 315   $(Device/netgear_ath79_nand)
 316 endef
 317 TARGET_DEVICES += netgear_wndr4300tn
 318
 319 define Device/netgear_wndr4300-v2
 320   SOC := qca9563
 321   DEVICE_MODEL := WNDR4300
 322   DEVICE_VARIANT := v2
 323   UIMAGE_MAGIC := 0x27051956
 324   NETGEAR_BOARD_ID := WNDR4500series
 325   NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012175
 326   $(Device/netgear_ath79_nand)
 327 endef
 328 TARGET_DEVICES += netgear_wndr4300-v2
 329
 330 define Device/netgear_wndr4500-v3
 331   SOC := qca9563
 332   DEVICE_MODEL := WNDR4500
 333   DEVICE_VARIANT := v3
 334   UIMAGE_MAGIC := 0x27051956
 335   NETGEAR_BOARD_ID := WNDR4500series
 336   NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012173
 337   $(Device/netgear_ath79_nand)
 338 endef
 339 TARGET_DEVICES += netgear_wndr4500-v3
 340
 341 define Device/zte_mf28x_common
 342   SOC := qca9563
 343   DEVICE_VENDOR := ZTE
 344   DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct
 345   BLOCKSIZE := 128k
 346   PAGESIZE := 2048
 347   KERNEL_SIZE := 4096k
 348   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 349 endef
 350
 351 define Device/zte_mf281
 352   $(Device/zte_mf28x_common)
 353   DEVICE_MODEL := MF281
 354   KERNEL_SIZE := 6144k
 355   IMAGE_SIZE := 29696k
 356   IMAGES += factory.bin
 357   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 358         check-size
 359   DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis \
 360         kmod-usb-acm comgt-ncm
 361 endef
 362 TARGET_DEVICES += zte_mf281
 363
 364 define Device/zte_mf286
 365   $(Device/zte_mf28x_common)
 366   DEVICE_MODEL := MF286
 367   DEVICE_PACKAGES += ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan \
 368         kmod-usb-serial-option uqmi
 369 endef
 370 TARGET_DEVICES += zte_mf286
 371
 372 define Device/zte_mf286a
 373   $(Device/zte_mf28x_common)
 374   DEVICE_MODEL := MF286A
 375   DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan \
 376         kmod-usb-serial-option uqmi
 377 endef
 378 TARGET_DEVICES += zte_mf286a
 379
 380 define Device/zte_mf286r
 381   $(Device/zte_mf28x_common)
 382   DEVICE_MODEL := MF286R
 383   DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis kmod-usb-acm \
 384         comgt-ncm
 385 endef
 386 TARGET_DEVICES += zte_mf286r
 387
 388 define Device/zyxel_nbg6716
 389   SOC := qca9558
 390   DEVICE_VENDOR := ZyXEL
 391   DEVICE_MODEL := NBG6716
 392   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \
 393         ath10k-firmware-qca988x-ct
 394   RAS_BOARD := NBG6716
 395   RAS_ROOTFS_SIZE := 29696k
 396   RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)"
 397   KERNEL_SIZE := 4096k
 398   BLOCKSIZE := 128k
 399   PAGESIZE := 2048
 400   LOADER_TYPE := bin
 401   KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | uImage none | \
 402         zyxel-buildkerneljffs | check-size 4096k
 403   IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
 404   IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | \
 405         sysupgrade-tar rootfs=$$$$@ | append-metadata
 406   IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | \
 407         pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
 408   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 409         zyxel-factory
 410   UBINIZE_OPTS := -E 5
 411 endef
 412 TARGET_DEVICES += zyxel_nbg6716
 413
 414 define Device/zyxel_emg2926_q10a
 415   $(Device/zyxel_nbg6716)
 416   DEVICE_MODEL := EMG2926-Q10A
 417   RAS_BOARD := AAVK-EMG2926Q10A
 418 endef
 419 TARGET_DEVICES += zyxel_emg2926_q10a