target/linux/au1000/base-files/lib/au1000.sh

   1 #!/bin/sh
   2
   3 au1000_yamonenv_getvar()
   4 {
   5         local varname="$1"
   6         local partition
   7
   8         . /lib/functions.sh
   9
  10         partition="$( find_mtd_part 'yamon env' )"
  11         YAMONENVFILE="$partition" yamonenv "$varname"
  12 }
  13
  14 au1000_detect()
  15 {
  16         local line board_name model
  17
  18         while read line; do
  19                 case "$line" in
  20                         'system type'*)
  21                                 break
  22                         ;;
  23                 esac
  24         done <'/proc/cpuinfo'
  25
  26         case "$line" in
  27                 *' MTX-1')
  28                         # both models appear nearly similar: the 'InternetBox' has
  29                         # the same design but shrinked to 1 PCB and only 1 x miniPCI
  30                         # for WiFi/ath5k and 1 x miniPCI for CardBus/UMTS, they differ
  31                         # in BogoMIPS but there are old MeshCubes with 330 Mhz instead
  32                         # of 400 MHz and no Cube has 'imei' (for UMTS) set in bootloader-env
  33
  34                         if [ -n "$( au1000_yamonenv_getvar 'imei' )" ]; then
  35                                 board_name='internetbox'
  36                                 model='T-Mobile InternetBox TMD SB1-S'
  37                         else
  38                                 board_name='meshcube'
  39                                 model='4G Systems AccessCube/MeshCube'
  40                         fi
  41                 ;;
  42                 *)
  43                         board_name='unknown'
  44                         model='unknown'
  45                 ;;
  46         esac
  47
  48         mkdir -p '/tmp/sysinfo'
  49         echo "$board_name" >'/tmp/sysinfo/board_name'
  50         echo "$model" >'/tmp/sysinfo/model'
  51 }
  52
  53 au1000_board_name()
  54 {
  55         local file='/tmp/sysinfo/board_name'
  56
  57         [ -e "$file" ] || au1000_detect
  58         cat "$file"
  59 }