1 # SPDX-License-Identifier: GPL-2.0-only
3 # Copyright (C) 2013 OpenWrt.org
5 include $(TOPDIR
)/rules.mk
6 include $(INCLUDE_DIR
)/image.mk
10 echo
-ne
'\xde\xad\xc0\xde' > $(KDIR
)/fs_mark
11 $(call prepare_generic_squashfs
,$(KDIR
)/fs_mark
)
13 # For UBI we want only one extra block
14 rm -f
$(KDIR
)/ubi_mark
15 echo
-ne
'\xde\xad\xc0\xde' > $(KDIR
)/ubi_mark
19 $(STAGING_DIR_HOST
)/bin
/lzma e
$@
-d16
$(1) $@.new
23 # Similar to Build/tplink-safeloader but uses TRX instead of clean kernel
24 define Build
/bcm53xx-tplink-safeloader
25 $(STAGING_DIR_HOST
)/bin
/trx \
28 -f
$(IMAGE_KERNEL
) -a
1024
29 $(STAGING_DIR_HOST
)/bin
/tplink-safeloader \
39 define Build
/buffalo-wzr-header
40 $(eval product
=$(word 1,$(1)))
41 $(eval region
=$(word 2,$(1)))
43 echo
$(product
)_
$(BUFFALO_TAG_VERSION
)_
$(BUFFALO_TAG_MINOR
)_
$(region
)_
$(BUFFALO_TAG_PLATFORM
); \
44 echo filelen
=$$(stat
-c
%s
$@
); \
50 # TRX with only one (kernel) partition
52 $(STAGING_DIR_HOST
)/bin
/trx \
59 define Build
/trx-serial
60 $(STAGING_DIR_HOST
)/bin
/otrx create
$@.new \
61 -f
$(IMAGE_KERNEL
) -a
1024 \
62 -f
$@
-a
0x10000 -A
$(KDIR
)/fs_mark
67 # kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
68 # if it grows up between releases
69 # root: UBI with one extra block containing UBI mark to trigger erasing
71 $(STAGING_DIR_HOST
)/bin
/otrx create
$@.new \
72 -f
$(IMAGE_KERNEL
) -a
0x20000 -b
0x400000 \
74 -A
$(KDIR
)/ubi_mark
-a
0x20000
79 $(STAGING_DIR_HOST
)/bin
/asustrx \
80 -p
$(ASUS_PRODUCTID
) -i
$@
-o
$@.new
84 define Build
/luxul-lxl
85 $(STAGING_DIR_HOST
)/bin
/lxlfw create
$@.new \
91 define Build
/seama-nand
93 $(STAGING_DIR_HOST
)/bin
/oseama \
95 -m
"dev=/dev/mtdblock/7" \
102 $(STAGING_DIR_HOST
)/bin
/seama \
104 -m
"signature=$(SIGNATURE)" \
108 DEVICE_VARS
+= ASUS_PRODUCTID
109 DEVICE_VARS
+= BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
110 DEVICE_VARS
+= SIGNATURE
111 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_REGION TPLINK_BOARD
112 DEVICE_VARS
+= LUXUL_BOARD
114 IEEE8021X
:= wpad-basic-wolfssl
115 B43
:= $(IEEE8021X
) kmod-b43
116 BRCMFMAC_43602A1
:= $(IEEE8021X
) kmod-brcmfmac brcmfmac-firmware-43602a1-pcie
117 BRCMFMAC_4366B1
:= $(IEEE8021X
) kmod-brcmfmac brcmfmac-firmware-4366b1-pcie
118 BRCMFMAC_4366C0
:= $(IEEE8021X
) kmod-brcmfmac brcmfmac-firmware-4366c0-pcie
119 USB2_PACKAGES
:= kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2
120 USB2_PACKAGES
+= kmod-usb-ledtrig-usbport
121 USB3_PACKAGES
:= $(USB2_PACKAGES
) kmod-usb3 kmod-phy-bcm-ns-usb3
123 define Device
/Default
124 # .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
125 # extract the full dtb name based on the device info
126 DEVICE_DTS
:= $(patsubst %.dtb
,%,$(notdir $(wildcard $(if
$(IB
),$(KDIR
),$(DTS_DIR
))/*-$(subst _
,-,$(1)).dtb
)))
127 KERNEL
:= kernel-bin | append-dtb | lzma-d16
128 KERNEL_DEPENDS
= $$(wildcard $(DTS_DIR
)/$$(DEVICE_DTS
).dts
)
129 KERNEL_INITRAMFS_SUFFIX
:= .trx
130 KERNEL_INITRAMFS
:= kernel-bin | append-dtb | lzma-d16 | trx
131 FILESYSTEMS
:= squashfs
132 KERNEL_NAME
:= zImage
133 DEVICE_IMG_NAME
= $$(DEVICE_IMG_PREFIX
)-$$(1).
$$(2)
137 IMAGE
/trx
:= append-ubi | trx-nand
141 DEVICE_VENDOR
:= ASUS
143 IMAGE
/trx
:= append-ubi | trx-nand | asus-trx
146 define Device
/asus_rt-ac56u
148 DEVICE_MODEL
:= RT-AC56U
149 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
150 ASUS_PRODUCTID
:= RT-AC56U
152 TARGET_DEVICES
+= asus_rt-ac56u
154 define Device
/asus_rt-ac68u
156 DEVICE_MODEL
:= RT-AC68U
157 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
158 ASUS_PRODUCTID
:= RT-AC68U
160 TARGET_DEVICES
+= asus_rt-ac68u
162 define Device
/asus_rt-ac87u
164 DEVICE_MODEL
:= RT-AC87U
165 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
166 ASUS_PRODUCTID
:= RT-AC87U
168 TARGET_DEVICES
+= asus_rt-ac87u
170 define Device
/asus_rt-n18u
172 DEVICE_MODEL
:= RT-N18U
173 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
174 ASUS_PRODUCTID
:= RT-N18U
176 TARGET_DEVICES
+= asus_rt-n18u
178 # Buffalo devices have TFTP recovery mode which can work nicely with initramfs
180 # We should have two initramfs images for Buffalo: plain initramfs kernel and
181 # TRX with initramfs kernel. It's not possible right now so let's just build
182 # plain initramfs kernel as it may be more useful.
183 define Device
/buffalo
/Default
184 DEVICE_VENDOR
:= Buffalo
185 KERNEL_INITRAMFS_SUFFIX
= $$(KERNEL_SUFFIX
)
186 KERNEL_INITRAMFS
= $$(KERNEL
)
189 define Device
/buffalo_wxr-1900dhp
190 $(call Device
/buffalo
/Default
)
191 DEVICE_MODEL
:= WXR-1900DHP
192 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
194 TARGET_DEVICES
+= buffalo_wxr-1900dhp
196 define Device
/buffalo_wzr-600dhp2
197 $(call Device
/buffalo
/Default
)
198 DEVICE_MODEL
:= WZR-600DHP2
199 DEVICE_PACKAGES
:= $(B43
) $(USB2_PACKAGES
)
201 TARGET_DEVICES
+= buffalo_wzr-600dhp2
203 define Device
/buffalo_wzr-900dhp
204 $(call Device
/buffalo
/Default
)
205 DEVICE_MODEL
:= WZR-900DHP
206 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
207 BUFFALO_TAG_PLATFORM
:= bcm
208 BUFFALO_TAG_VERSION
:= 9.99
209 BUFFALO_TAG_MINOR
:= 9.99
210 IMAGES
+= factory-DHP-EU.bin factory-DHP2-JP.bin
211 IMAGE
/factory-DHP-EU.bin
:= \
212 append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP EU | \
213 buffalo-enc WZR-900DHP
$$(BUFFALO_TAG_VERSION
) | \
214 buffalo-tag-dhp WZR-900DHP EU mlang20 | buffalo-enc-tag | \
216 IMAGE
/factory-DHP2-JP.bin
:= \
217 append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP2 JP | \
218 buffalo-enc WZR-900DHP2
$$(BUFFALO_TAG_VERSION
) | \
219 buffalo-tag-dhp WZR-900DHP2 JP jp | buffalo-enc-tag | \
222 TARGET_DEVICES
+= buffalo_wzr-900dhp
224 define Device
/buffalo_wzr-1750dhp
225 $(call Device
/buffalo
/Default
)
226 DEVICE_MODEL
:= WZR-1750DHP
227 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
229 TARGET_DEVICES
+= buffalo_wzr-1750dhp
232 DEVICE_VENDOR
:= D-Link
234 IMAGE
/bin
:= append-ubi | seama-nand
237 define Device
/dlink_dir-885l
238 DEVICE_MODEL
:= DIR-885L
239 DEVICE_PACKAGES
:= $(BRCMFMAC_4366B1
) $(USB3_PACKAGES
)
241 SIGNATURE
:= wrgac42_dlink
.2015_dir885l
243 TARGET_DEVICES
+= dlink_dir-885l
245 define Device
/linksys_ea6300-v1
246 DEVICE_VENDOR
:= Linksys
247 DEVICE_MODEL
:= EA6300
249 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
251 TARGET_DEVICES
+= linksys_ea6300-v1
253 define Device
/linksys_ea6500-v2
254 DEVICE_VENDOR
:= Linksys
255 DEVICE_MODEL
:= EA6500
257 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
259 TARGET_DEVICES
+= linksys_ea6500-v2
261 define Device
/linksys_ea9200
262 DEVICE_VENDOR
:= Linksys
263 DEVICE_MODEL
:= EA9200
265 DEVICE_PACKAGES
:= $(BRCMFMAC_43602A1
) $(USB3_PACKAGES
)
267 TARGET_DEVICES
+= linksys_ea9200
269 define Device
/linksys_ea9500
270 DEVICE_VENDOR
:= Linksys
271 DEVICE_MODEL
:= EA9500
272 DEVICE_PACKAGES
:= $(BRCMFMAC_4366C0
) $(USB3_PACKAGES
)
273 DEVICE_DTS
:= bcm47094-linksys-panamera
275 TARGET_DEVICES
+= linksys_ea9500
278 DEVICE_VENDOR
:= Luxul
280 IMAGE
/lxl
:= append-ubi | trx-nand | luxul-lxl
283 define Device
/luxul_abr-4500
285 DEVICE_MODEL
:= ABR-4500
286 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
287 LUXUL_BOARD
:= ABR-4500
289 TARGET_DEVICES
+= luxul_abr-4500
291 define Device
/luxul_xap-1610
293 DEVICE_MODEL
:= XAP-1610
294 DEVICE_PACKAGES
:= $(BRCMFMAC_4366C0
)
295 IMAGE
/lxl
:= append-rootfs | trx-serial | luxul-lxl
296 LUXUL_BOARD
:= XAP-1610
298 TARGET_DEVICES
+= luxul_xap-1610
300 define Device
/luxul_xbr-4500
302 DEVICE_MODEL
:= XBR-4500
303 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
304 LUXUL_BOARD
:= XBR-4500
306 TARGET_DEVICES
+= luxul_xbr-4500
308 define Device
/luxul_xwr-3150
310 DEVICE_MODEL
:= XWR-3150
311 DEVICE_PACKAGES
:= $(BRCMFMAC_4366C0
) $(USB3_PACKAGES
)
312 DEVICE_DTS
:= bcm47094-luxul-xwr-3150-v1
313 LUXUL_BOARD
:= XWR-3150
315 TARGET_DEVICES
+= luxul_xwr-3150
317 define Device
/meraki_mr32
318 DEVICE_VENDOR
:= Meraki
320 DEVICE_PACKAGES
:= $(B43
) kmod-i2c-bcm-iproc kmod-i2c-gpio kmod-eeprom-at24 \
321 kmod-leds-pwm kmod-hwmon-ina2xx kmod-bluetooth
322 DEVICE_DTS
:= bcm53016-meraki-mr32
323 # Meraki FW r23 tries to resize the part.safe partition before it will
324 # flash the image. This is a bit of a problem, since resizing will fail
325 # if the partition is smaller than the old one.
326 KERNEL_LOADADDR
:= 0x00008000
327 KERNEL_INITRAMFS_SUFFIX
:= .bin
328 DEVICE_DTS_DELIMITER
:= @
329 DEVICE_DTS_CONFIG
:= config@
1
330 KERNEL_INITRAMFS
:= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | \
332 KERNEL
:= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
333 IMAGES
+= sysupgrade.bin
334 # Currently the only device that uses the new image check
335 IMAGE
/sysupgrade.bin
:= sysupgrade-tar | append-metadata
337 # The loader is specifically looking for fdt@2:
338 # [ 3.190000] find_itb_subimage: error finding fdt@2: FDT_ERR_NOTFOUND
339 # The image won't boot, if it isn't found. :(
342 TARGET_DEVICES
+= meraki_mr32
344 define Device
/netgear
345 DEVICE_VENDOR
:= NETGEAR
347 IMAGE
/chk
:= append-ubi | trx-nand | netgear-chk
351 define Device
/netgear_r6250
352 DEVICE_MODEL
:= R6250
353 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
355 NETGEAR_BOARD_ID
:= U12H245T00_NETGEAR
357 TARGET_DEVICES
+= netgear_r6250
359 define Device
/netgear_r6300-v2
360 DEVICE_MODEL
:= R6300
362 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
364 NETGEAR_BOARD_ID
:= U12H240T00_NETGEAR
366 TARGET_DEVICES
+= netgear_r6300-v2
368 define Device
/netgear_r7000
369 DEVICE_MODEL
:= R7000
370 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
372 NETGEAR_BOARD_ID
:= U12H270T00_NETGEAR
374 TARGET_DEVICES
+= netgear_r7000
376 define Device
/netgear_r7900
377 DEVICE_MODEL
:= R7900
378 DEVICE_PACKAGES
:= $(BRCMFMAC_43602A1
) $(USB3_PACKAGES
)
380 NETGEAR_BOARD_ID
:= U12H315T30_NETGEAR
382 TARGET_DEVICES
+= netgear_r7900
384 define Device
/netgear_r8000
385 DEVICE_MODEL
:= R8000
386 DEVICE_PACKAGES
:= $(BRCMFMAC_43602A1
) $(USB3_PACKAGES
)
388 NETGEAR_BOARD_ID
:= U12H315T00_NETGEAR
390 TARGET_DEVICES
+= netgear_r8000
392 define Device
/netgear_r8500
393 DEVICE_MODEL
:= R8500
394 DEVICE_PACKAGES
:= $(BRCMFMAC_4366B1
) $(USB3_PACKAGES
)
396 NETGEAR_BOARD_ID
:= U12H334T00_NETGEAR
399 TARGET_DEVICES
+= netgear_r8500
401 define Device
/smartrg_sr400ac
402 DEVICE_VENDOR
:= SmartRG
403 DEVICE_MODEL
:= SR400ac
404 DEVICE_PACKAGES
:= $(BRCMFMAC_43602A1
) $(USB3_PACKAGES
)
406 IMAGE
/trx
:= append-rootfs | trx-serial
407 KERNEL_INITRAMFS_SUFFIX
:= .bin
408 KERNEL_INITRAMFS
:= kernel-bin | append-dtb | lzma-d16
410 TARGET_DEVICES
+= smartrg_sr400ac
412 define Device
/phicomm_k3
413 DEVICE_VENDOR
:= PHICOMM
415 DEVICE_PACKAGES
:= $(BRCMFMAC_4366C0
) $(USB3_PACKAGES
)
418 TARGET_DEVICES
+= phicomm_k3
420 define Device
/tenda_ac9
421 DEVICE_VENDOR
:= Tenda
423 DEVICE_PACKAGES
:= $(B43
) $(USB2_PACKAGES
)
425 IMAGE
/trx
:= append-rootfs | trx-serial
427 TARGET_DEVICES
+= tenda_ac9
429 define Device
/tplink_archer-c5-v2
430 DEVICE_VENDOR
:= TP-Link
431 DEVICE_MODEL
:= Archer C5
433 DEVICE_PACKAGES
:= $(B43
) $(USB2_PACKAGES
)
435 IMAGE
/bin
:= append-rootfs | bcm53xx-tplink-safeloader
436 TPLINK_BOARD
:= ARCHER-C5-V2
439 #TARGET_DEVICES += tplink_archer-c5-v2
441 define Device
/tplink_archer-c9-v1
442 DEVICE_VENDOR
:= TP-Link
443 DEVICE_MODEL
:= Archer C9
445 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
447 IMAGE
/bin
:= append-rootfs | bcm53xx-tplink-safeloader
448 TPLINK_BOARD
:= ARCHERC9
451 #TARGET_DEVICES += tplink_archer-c9-v1
453 $(eval
$(call BuildImage
))