1 # SPDX-License-Identifier: GPL-2.0-only
3 # Copyright (C) 2013 OpenWrt.org
5 include $(TOPDIR
)/rules.mk
6 include $(INCLUDE_DIR
)/image.mk
10 echo
-ne
'\xde\xad\xc0\xde' > $(KDIR
)/fs_mark
11 $(call prepare_generic_squashfs
,$(KDIR
)/fs_mark
)
13 # For UBI we want only one extra block
14 rm -f
$(KDIR
)/ubi_mark
15 echo
-ne
'\xde\xad\xc0\xde' > $(KDIR
)/ubi_mark
19 $(STAGING_DIR_HOST
)/bin
/lzma e
$@
-d16
$(1) $@.new
23 # Similar to Build/tplink-safeloader but uses TRX instead of clean kernel
24 define Build
/bcm53xx-tplink-safeloader
25 $(STAGING_DIR_HOST
)/bin
/trx \
28 -f
$(IMAGE_KERNEL
) -a
1024
29 $(STAGING_DIR_HOST
)/bin
/tplink-safeloader \
39 define Build
/buffalo-wzr-header
40 $(eval product
=$(word 1,$(1)))
41 $(eval region
=$(word 2,$(1)))
43 echo
$(product
)_
$(BUFFALO_TAG_VERSION
)_
$(BUFFALO_TAG_MINOR
)_
$(region
)_
$(BUFFALO_TAG_PLATFORM
); \
44 echo filelen
=$$(stat
-c
%s
$@
); \
50 # TRX with only one (kernel) partition
52 $(STAGING_DIR_HOST
)/bin
/trx \
59 define Build
/trx-serial
60 $(STAGING_DIR_HOST
)/bin
/otrx create
$@.new \
61 -f
$(IMAGE_KERNEL
) -a
1024 \
62 -f
$@
-a
0x10000 -A
$(KDIR
)/fs_mark
67 # kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
68 # if it grows up between releases
69 # root: UBI with one extra block containing UBI mark to trigger erasing
71 $(STAGING_DIR_HOST
)/bin
/otrx create
$@.new \
72 -f
$(IMAGE_KERNEL
) -a
0x20000 -b
0x400000 \
74 -A
$(KDIR
)/ubi_mark
-a
0x20000
79 $(STAGING_DIR_HOST
)/bin
/asustrx \
80 -p
$(ASUS_PRODUCTID
) -i
$@
-o
$@.new
84 define Build
/luxul-lxl
85 $(STAGING_DIR_HOST
)/bin
/lxlfw create
$@.new \
91 define Build
/seama-nand
93 $(STAGING_DIR_HOST
)/bin
/oseama \
95 -m
"dev=/dev/mtdblock/7" \
102 $(STAGING_DIR_HOST
)/bin
/seama \
104 -m
"signature=$(SIGNATURE)" \
108 DEVICE_VARS
+= ASUS_PRODUCTID
109 DEVICE_VARS
+= BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
110 DEVICE_VARS
+= SIGNATURE
111 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_REGION TPLINK_BOARD
112 DEVICE_VARS
+= LUXUL_BOARD
114 IEEE8021X
:= wpad-basic-wolfssl
115 B43
:= $(IEEE8021X
) kmod-b43
116 BRCMFMAC_43602A1
:= $(IEEE8021X
) kmod-brcmfmac brcmfmac-firmware-43602a1-pcie
117 BRCMFMAC_4366B1
:= $(IEEE8021X
) kmod-brcmfmac brcmfmac-firmware-4366b1-pcie
118 BRCMFMAC_4366C0
:= $(IEEE8021X
) kmod-brcmfmac brcmfmac-firmware-4366c0-pcie
119 USB2_PACKAGES
:= kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2
120 USB2_PACKAGES
+= kmod-usb-ledtrig-usbport
121 USB3_PACKAGES
:= $(USB2_PACKAGES
) kmod-usb3 kmod-phy-bcm-ns-usb3
123 define Device
/Default
124 # .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
125 # extract the full dtb name based on the device info
126 DEVICE_DTS
:= $(patsubst %.dtb
,%,$(notdir $(wildcard $(if
$(IB
),$(KDIR
),$(DTS_DIR
))/*-$(subst _
,-,$(1)).dtb
)))
127 KERNEL
:= kernel-bin | append-dtb | lzma-d16
128 KERNEL_DEPENDS
= $$(wildcard $(DTS_DIR
)/$$(DEVICE_DTS
).dts
)
129 KERNEL_INITRAMFS_SUFFIX
:= .trx
130 KERNEL_INITRAMFS
:= kernel-bin | append-dtb | lzma-d16 | trx
131 FILESYSTEMS
:= squashfs
132 KERNEL_NAME
:= zImage
133 DEVICE_IMG_NAME
= $$(DEVICE_IMG_PREFIX
)-$$(1).
$$(2)
137 IMAGE
/trx
:= append-ubi | trx-nand
141 DEVICE_VENDOR
:= ASUS
143 IMAGE
/trx
:= append-ubi | trx-nand | asus-trx
146 define Device
/asus_rt-ac56u
148 DEVICE_MODEL
:= RT-AC56U
149 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
150 ASUS_PRODUCTID
:= RT-AC56U
152 TARGET_DEVICES
+= asus_rt-ac56u
154 define Device
/asus_rt-ac68u
156 DEVICE_MODEL
:= RT-AC68U
157 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
158 ASUS_PRODUCTID
:= RT-AC68U
160 TARGET_DEVICES
+= asus_rt-ac68u
162 define Device
/asus_rt-ac87u
164 DEVICE_MODEL
:= RT-AC87U
165 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
166 ASUS_PRODUCTID
:= RT-AC87U
168 TARGET_DEVICES
+= asus_rt-ac87u
170 define Device
/asus_rt-n18u
172 DEVICE_MODEL
:= RT-N18U
173 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
174 ASUS_PRODUCTID
:= RT-N18U
176 TARGET_DEVICES
+= asus_rt-n18u
178 # Buffalo devices have TFTP recovery mode which can work nicely with initramfs
180 # We should have two initramfs images for Buffalo: plain initramfs kernel and
181 # TRX with initramfs kernel. It's not possible right now so let's just build
182 # plain initramfs kernel as it may be more useful.
183 define Device
/buffalo
/Default
184 DEVICE_VENDOR
:= Buffalo
185 KERNEL_INITRAMFS_SUFFIX
= $$(KERNEL_SUFFIX
)
186 KERNEL_INITRAMFS
= $$(KERNEL
)
189 define Device
/buffalo_wxr-1900dhp
190 $(call Device
/buffalo
/Default
)
191 DEVICE_MODEL
:= WXR-1900DHP
192 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
194 TARGET_DEVICES
+= buffalo_wxr-1900dhp
196 define Device
/buffalo_wzr-600dhp2
197 $(call Device
/buffalo
/Default
)
198 DEVICE_MODEL
:= WZR-600DHP2
199 DEVICE_PACKAGES
:= $(B43
) $(USB2_PACKAGES
)
201 TARGET_DEVICES
+= buffalo_wzr-600dhp2
203 define Device
/buffalo_wzr-900dhp
204 $(call Device
/buffalo
/Default
)
205 DEVICE_MODEL
:= WZR-900DHP
206 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
207 BUFFALO_TAG_PLATFORM
:= bcm
208 BUFFALO_TAG_VERSION
:= 9.99
209 BUFFALO_TAG_MINOR
:= 9.99
210 IMAGES
+= factory-DHP-EU.bin factory-DHP2-JP.bin
211 IMAGE
/factory-DHP-EU.bin
:= \
212 append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP EU | \
213 buffalo-enc WZR-900DHP
$$(BUFFALO_TAG_VERSION
) | \
214 buffalo-tag-dhp WZR-900DHP EU mlang20 | buffalo-enc-tag | \
216 IMAGE
/factory-DHP2-JP.bin
:= \
217 append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP2 JP | \
218 buffalo-enc WZR-900DHP2
$$(BUFFALO_TAG_VERSION
) | \
219 buffalo-tag-dhp WZR-900DHP2 JP jp | buffalo-enc-tag | \
223 TARGET_DEVICES
+= buffalo_wzr-900dhp
225 define Device
/buffalo_wzr-1750dhp
226 $(call Device
/buffalo
/Default
)
227 DEVICE_MODEL
:= WZR-1750DHP
228 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
230 TARGET_DEVICES
+= buffalo_wzr-1750dhp
233 DEVICE_VENDOR
:= D-Link
235 IMAGE
/bin
:= append-ubi | seama-nand
238 define Device
/dlink_dir-885l
239 DEVICE_MODEL
:= DIR-885L
240 DEVICE_PACKAGES
:= $(BRCMFMAC_4366B1
) $(USB3_PACKAGES
)
242 SIGNATURE
:= wrgac42_dlink
.2015_dir885l
244 TARGET_DEVICES
+= dlink_dir-885l
246 define Device
/linksys_ea6300-v1
247 DEVICE_VENDOR
:= Linksys
248 DEVICE_MODEL
:= EA6300
250 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
252 TARGET_DEVICES
+= linksys_ea6300-v1
254 define Device
/linksys_ea6500-v2
255 DEVICE_VENDOR
:= Linksys
256 DEVICE_MODEL
:= EA6500
258 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
260 TARGET_DEVICES
+= linksys_ea6500-v2
262 define Device
/linksys_ea9200
263 DEVICE_VENDOR
:= Linksys
264 DEVICE_MODEL
:= EA9200
266 DEVICE_PACKAGES
:= $(BRCMFMAC_43602A1
) $(USB3_PACKAGES
)
268 TARGET_DEVICES
+= linksys_ea9200
270 define Device
/linksys_ea9500
271 DEVICE_VENDOR
:= Linksys
272 DEVICE_MODEL
:= EA9500
273 DEVICE_PACKAGES
:= $(BRCMFMAC_4366C0
) $(USB3_PACKAGES
)
274 DEVICE_DTS
:= bcm47094-linksys-panamera
276 TARGET_DEVICES
+= linksys_ea9500
279 DEVICE_VENDOR
:= Luxul
281 IMAGE
/lxl
:= append-ubi | trx-nand | luxul-lxl
284 define Device
/luxul_abr-4500
286 DEVICE_MODEL
:= ABR-4500
287 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
288 LUXUL_BOARD
:= ABR-4500
290 TARGET_DEVICES
+= luxul_abr-4500
292 define Device
/luxul_xap-1610
294 DEVICE_MODEL
:= XAP-1610
295 DEVICE_PACKAGES
:= $(BRCMFMAC_4366C0
)
296 IMAGE
/lxl
:= append-rootfs | trx-serial | luxul-lxl
297 LUXUL_BOARD
:= XAP-1610
299 TARGET_DEVICES
+= luxul_xap-1610
301 define Device
/luxul_xbr-4500
303 DEVICE_MODEL
:= XBR-4500
304 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
305 LUXUL_BOARD
:= XBR-4500
307 TARGET_DEVICES
+= luxul_xbr-4500
309 define Device
/luxul_xwr-3150
311 DEVICE_MODEL
:= XWR-3150
312 DEVICE_PACKAGES
:= $(BRCMFMAC_4366C0
) $(USB3_PACKAGES
)
313 DEVICE_DTS
:= bcm47094-luxul-xwr-3150-v1
314 LUXUL_BOARD
:= XWR-3150
316 TARGET_DEVICES
+= luxul_xwr-3150
318 define Device
/meraki_mr32
319 DEVICE_VENDOR
:= Meraki
321 DEVICE_PACKAGES
:= $(B43
) kmod-i2c-bcm-iproc kmod-i2c-gpio kmod-eeprom-at24 \
322 kmod-leds-pwm kmod-hwmon-ina2xx kmod-bluetooth
323 DEVICE_DTS
:= bcm53016-meraki-mr32
324 # Meraki FW r23 tries to resize the part.safe partition before it will
325 # flash the image. This is a bit of a problem, since resizing will fail
326 # if the partition is smaller than the old one.
327 KERNEL_LOADADDR
:= 0x00008000
328 KERNEL_INITRAMFS_SUFFIX
:= .bin
329 DEVICE_DTS_DELIMITER
:= @
330 DEVICE_DTS_CONFIG
:= config@
1
331 KERNEL_INITRAMFS
:= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | \
333 KERNEL
:= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
334 IMAGES
+= sysupgrade.bin
335 # Currently the only device that uses the new image check
336 IMAGE
/sysupgrade.bin
:= sysupgrade-tar | append-metadata
338 # The loader is specifically looking for fdt@2:
339 # [ 3.190000] find_itb_subimage: error finding fdt@2: FDT_ERR_NOTFOUND
340 # The image won't boot, if it isn't found. :(
343 TARGET_DEVICES
+= meraki_mr32
345 define Device
/netgear
346 DEVICE_VENDOR
:= NETGEAR
348 IMAGE
/chk
:= append-ubi | trx-nand | netgear-chk
352 define Device
/netgear_r6250
353 DEVICE_MODEL
:= R6250
354 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
356 NETGEAR_BOARD_ID
:= U12H245T00_NETGEAR
358 TARGET_DEVICES
+= netgear_r6250
360 define Device
/netgear_r6300-v2
361 DEVICE_MODEL
:= R6300
363 DEVICE_PACKAGES
:= $(B43
) $(USB3_PACKAGES
)
365 NETGEAR_BOARD_ID
:= U12H240T00_NETGEAR
367 TARGET_DEVICES
+= netgear_r6300-v2
369 define Device
/netgear_r7000
370 DEVICE_MODEL
:= R7000
371 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
373 NETGEAR_BOARD_ID
:= U12H270T00_NETGEAR
375 TARGET_DEVICES
+= netgear_r7000
377 define Device
/netgear_r7900
378 DEVICE_MODEL
:= R7900
379 DEVICE_PACKAGES
:= $(BRCMFMAC_43602A1
) $(USB3_PACKAGES
)
381 NETGEAR_BOARD_ID
:= U12H315T30_NETGEAR
383 TARGET_DEVICES
+= netgear_r7900
385 define Device
/netgear_r8000
386 DEVICE_MODEL
:= R8000
387 DEVICE_PACKAGES
:= $(BRCMFMAC_43602A1
) $(USB3_PACKAGES
)
389 NETGEAR_BOARD_ID
:= U12H315T00_NETGEAR
391 TARGET_DEVICES
+= netgear_r8000
393 define Device
/netgear_r8500
394 DEVICE_MODEL
:= R8500
395 DEVICE_PACKAGES
:= $(BRCMFMAC_4366B1
) $(USB3_PACKAGES
)
397 NETGEAR_BOARD_ID
:= U12H334T00_NETGEAR
400 TARGET_DEVICES
+= netgear_r8500
402 define Device
/smartrg_sr400ac
403 DEVICE_VENDOR
:= SmartRG
404 DEVICE_MODEL
:= SR400ac
405 DEVICE_PACKAGES
:= $(BRCMFMAC_43602A1
) $(USB3_PACKAGES
)
407 IMAGE
/trx
:= append-rootfs | trx-serial
408 KERNEL_INITRAMFS_SUFFIX
:= .bin
409 KERNEL_INITRAMFS
:= kernel-bin | append-dtb | lzma-d16
411 TARGET_DEVICES
+= smartrg_sr400ac
413 define Device
/phicomm_k3
414 DEVICE_VENDOR
:= PHICOMM
416 DEVICE_PACKAGES
:= $(BRCMFMAC_4366C0
) $(USB3_PACKAGES
)
419 TARGET_DEVICES
+= phicomm_k3
421 define Device
/tenda_ac9
422 DEVICE_VENDOR
:= Tenda
424 DEVICE_PACKAGES
:= $(B43
) $(USB2_PACKAGES
)
426 IMAGE
/trx
:= append-rootfs | trx-serial
428 TARGET_DEVICES
+= tenda_ac9
430 define Device
/tplink_archer-c5-v2
431 DEVICE_VENDOR
:= TP-Link
432 DEVICE_MODEL
:= Archer C5
434 DEVICE_PACKAGES
:= $(B43
) $(USB2_PACKAGES
)
436 IMAGE
/bin
:= append-rootfs | bcm53xx-tplink-safeloader
437 TPLINK_BOARD
:= ARCHER-C5-V2
440 #TARGET_DEVICES += tplink_archer-c5-v2
442 define Device
/tplink_archer-c9-v1
443 DEVICE_VENDOR
:= TP-Link
444 DEVICE_MODEL
:= Archer C9
446 DEVICE_PACKAGES
:= $(USB3_PACKAGES
)
448 IMAGE
/bin
:= append-rootfs | bcm53xx-tplink-safeloader
449 TPLINK_BOARD
:= ARCHERC9
452 #TARGET_DEVICES += tplink_archer-c9-v1
454 $(eval
$(call BuildImage
))