1 From: Dan Haab <dan.haab@legrand.com>
2 Date: Wed, 2 Oct 2019 09:57:26 -0600
3 Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
5 It's a simple network device based on BCM47094 with just a single
8 Signed-off-by: Dan Haab <dan.haab@legrand.com>
10 arch/arm/boot/dts/Makefile | 1 +
11 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 53 +++++++++++++++++++
12 2 files changed, 54 insertions(+)
13 create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
15 --- a/arch/arm/boot/dts/Makefile
16 +++ b/arch/arm/boot/dts/Makefile
17 @@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
18 bcm47094-luxul-abr-4500.dtb \
19 bcm47094-luxul-xap-1610.dtb \
20 bcm47094-luxul-xbr-4500.dtb \
21 + bcm47094-luxul-xwc-2000.dtb \
22 bcm47094-luxul-xwr-3100.dtb \
23 bcm47094-luxul-xwr-3150-v1.dtb \
24 bcm47094-netgear-r8500.dtb \
26 +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
28 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
30 + * Copyright 2019 Legrand AV Inc.
35 +#include "bcm47094.dtsi"
36 +#include "bcm5301x-nand-cs0-bch8.dtsi"
39 + compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
40 + model = "Luxul XWC-2000 V1";
43 + bootargs = "earlycon";
47 + reg = <0x00000000 0x08000000
48 + 0x88000000 0x18000000>;
52 + compatible = "gpio-leds";
55 + label = "bcm53xx:green:status";
56 + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
57 + linux,default-trigger = "timer";
62 + compatible = "gpio-keys";
63 + #address-cells = <1>;
68 + linux,code = <KEY_RESTART>;
69 + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;