target/linux/bcm63xx/dts/bcm6328-adb-a4001n1.dts

   1 #include "bcm6328.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "ADB P.DG A4001N1";
   7         compatible = "adb,a4001n1", "brcm,bcm6328";
   8
   9         aliases {
  10                 led-boot = &led_power_green;
  11                 led-failsafe = &led_power_green;
  12                 led-running = &led_power_green;
  13                 led-upgrade = &led_power_green;
  14         };
  15
  16         chosen {
  17                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25                 poll-interval = <20>;
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&pinctrl 23 1>;
  30                         linux,code = <KEY_RESTART>;
  31                         debounce-interval = <60>;
  32                 };
  33
  34                 wps {
  35                         label = "wlan";
  36                         gpios = <&pinctrl 24 1>;
  37                         linux,code = <KEY_WLAN>;
  38                         debounce-interval = <60>;
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 inet_red {
  46                         label = "red:inet";
  47                         gpios = <&pinctrl 2 1>;
  48                 };
  49                 ppp_green {
  50                         label = "green:ppp";
  51                         gpios = <&pinctrl 3 1>;
  52                 };
  53                 led_power_green: power_green {
  54                         label = "green:power";
  55                         gpios = <&pinctrl 4 1>;
  56                         default-state = "on";
  57                 };
  58                 ppp_red {
  59                         label = "red:ppp";
  60                         gpios = <&pinctrl 5 1>;
  61                 };
  62                 usb_green {
  63                         label = "green:3g";
  64                         gpios = <&pinctrl 6 1>;
  65                 };
  66                 usb_red {
  67                         label = "red:3g";
  68                         gpios = <&pinctrl 7 1>;
  69                 };
  70                 power_red {
  71                         label = "red:power";
  72                         gpios = <&pinctrl 8 1>;
  73                 };
  74                 wlan_green {
  75                         label = "green:wlan";
  76                         gpios = <&pinctrl 9 1>;
  77                 };
  78                 wlan_red {
  79                         label = "red:wlan";
  80                         gpios = <&pinctrl 10 1>;
  81                 };
  82                 inet_green {
  83                         label = "green:inet";
  84                         gpios = <&pinctrl 11 1>;
  85                 };
  86                 eth_red {
  87                         label = "red:eth";
  88                         gpios = <&pinctrl 20 1>;
  89                 };
  90                 eth_green {
  91                         label = "green:eth";
  92                         gpios = <&pinctrl 31 1>;
  93                 };
  94         };
  95 };
  96
  97 &hsspi {
  98         status = "okay";
  99
 100         flash@0 {
 101                 compatible = "jedec,spi-nor";
 102                 spi-max-frequency = <16666667>;
 103                 spi-tx-bus-width = <2>;
 104                 spi-rx-bus-width = <2>;
 105                 reg = <0>;
 106
 107                 #address-cells = <1>;
 108                 #size-cells = <1>;
 109
 110                 partitions {
 111                         compatible = "fixed-partitions";
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114
 115                         cfe@0 {
 116                                 reg = <0x000000 0x010000>;
 117                                 label = "cfe";
 118                                 read-only;
 119                         };
 120
 121                         linux@10000 {
 122                                 reg = <0x010000 0xfe0000>;
 123                                 label = "linux";
 124                                 compatible = "brcm,bcm963xx-imagetag";
 125                         };
 126
 127                         nvram@ff0000 {
 128                                 reg = <0xff0000 0x010000>;
 129                                 label = "nvram";
 130                         };
 131                 };
 132         };
 133 };
 134
 135 &uart0 {
 136         status = "okay";
 137 };