3 #include "bcm6328.dtsi"
5 #include <dt-bindings/input/input.h>
8 model = "ADB P.DG A4001N1";
9 compatible = "adb,a4001n1", "brcm,bcm6328";
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8";
17 compatible = "gpio-keys-polled";
24 gpios = <&pinctrl 23 1>;
25 linux,code = <KEY_RESTART>;
26 debounce-interval = <60>;
31 gpios = <&pinctrl 24 1>;
32 linux,code = <KEY_WLAN>;
33 debounce-interval = <60>;
38 compatible = "gpio-leds";
41 label = "A4001N1:red:inet";
42 gpios = <&pinctrl 2 1>;
45 label = "A4001N1:green:ppp";
46 gpios = <&pinctrl 3 1>;
49 label = "A4001N1:green:power";
50 gpios = <&pinctrl 4 1>;
54 label = "A4001N1:red:ppp";
55 gpios = <&pinctrl 5 1>;
58 label = "A4001N1:green:3g";
59 gpios = <&pinctrl 6 1>;
62 label = "A4001N1:red:3g";
63 gpios = <&pinctrl 7 1>;
66 label = "A4001N1:red:power";
67 gpios = <&pinctrl 8 1>;
70 label = "A4001N1:green:wlan";
71 gpios = <&pinctrl 9 1>;
74 label = "A4001N1:red:wlan";
75 gpios = <&pinctrl 10 1>;
78 label = "A4001N1:green:inet";
79 gpios = <&pinctrl 11 1>;
82 label = "A4001N1:red:eth";
83 gpios = <&pinctrl 20 1>;
86 label = "A4001N1:green:eth";
87 gpios = <&pinctrl 31 1>;
96 compatible = "jedec,spi-nor";
97 spi-max-frequency = <16666667>;
98 spi-tx-bus-width = <2>;
99 spi-rx-bus-width = <2>;
102 #address-cells = <1>;
106 compatible = "fixed-partitions";
107 #address-cells = <1>;
111 reg = <0x000000 0x010000>;
117 reg = <0x010000 0xfe0000>;
119 compatible = "brcm,bcm963xx-imagetag";
123 reg = <0xff0000 0x010000>;