3 #include "bcm6328.dtsi"
5 #include <dt-bindings/input/input.h>
8 model = "NuCom R5010UN v2";
9 compatible = "nucom,r5010un-v2", "brcm,bcm6328";
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8";
18 compatible = "gpio-keys-polled";
25 gpios = <&pinctrl 23 1>;
26 linux,code = <KEY_RESTART>;
27 debounce-interval = <60>;
32 gpios = <&pinctrl 24 1>;
33 linux,code = <KEY_WPS_BUTTON>;
34 debounce-interval = <60>;
39 compatible = "gpio-leds";
42 label = "R5010UNv2:green:inet";
43 gpios = <&pinctrl 1 1>;
46 label = "R5010UNv2:red:inet-fail";
47 gpios = <&pinctrl 2 1>;
50 label = "R5010UNv2:green:dsl";
51 gpios = <&pinctrl 3 1>;
54 label = "R5010UNv2:green:power";
55 gpios = <&pinctrl 4 1>;
59 label = "R5010UNv2:red:power-fail";
60 gpios = <&pinctrl 5 1>;
63 label = "R5010UNv2:green:wps";
64 gpios = <&pinctrl 10 1>;
67 label = "R5010UNv2:green:usb";
68 gpios = <&pinctrl 11 1>;
77 compatible = "jedec,spi-nor";
78 spi-max-frequency = <16666667>;
79 spi-tx-bus-width = <2>;
80 spi-rx-bus-width = <2>;
87 compatible = "fixed-partitions";
92 reg = <0x000000 0x010000>;
98 reg = <0x010000 0x7e0000>;
100 compatible = "brcm,bcm963xx-imagetag";
104 reg = <0x7f0000 0x010000>;