target/linux/bcm63xx/dts/bcm6368-adb-av4202n.dts

   1 #include "bcm6368.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         model = "ADB P.DG AV4202N";
   8         compatible = "adb,av4202n", "brcm,bcm6368";
   9
  10         aliases {
  11                 led-boot = &led_power_white;
  12                 led-failsafe = &led_power_white;
  13                 led-running = &led_power_white;
  14                 led-upgrade = &led_power_white;
  15         };
  16
  17         chosen {
  18                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  19                 stdout-path = "serial0:115200n8";
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys-polled";
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26                 poll-interval = <20>;
  27
  28                 reset {
  29                         label = "reset";
  30                         gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>;
  31                         linux,code = <KEY_RESTART>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 wlan {
  36                         label = "wlan";
  37                         gpios = <&pinctrl 37 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_WLAN>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 led_power_white: power_white {
  47                         label = "white:power";
  48                         gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>;
  49                         default-state = "on";
  50                 };
  51                 power_red {
  52                         label = "red:power";
  53                         gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
  54                 };
  55                 wan_white {
  56                         label = "white:wan";
  57                         gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>;
  58                 };
  59                 wan_red {
  60                         label = "red:wan";
  61                         gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>;
  62                 };
  63                 phone_white {
  64                         label = "white:phone";
  65                         gpios = <&pinctrl 24 GPIO_ACTIVE_LOW>;
  66                 };
  67                 phone_red {
  68                         label = "red:phone";
  69                         gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>;
  70                 };
  71                 wifi {
  72                         label = "blue:wifi";
  73                         gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>;
  74                 };
  75         };
  76 };
  77
  78 &pflash {
  79         status = "okay";
  80
  81         partitions {
  82                 compatible = "fixed-partitions";
  83                 #address-cells = <1>;
  84                 #size-cells = <1>;
  85
  86                 cfe@0 {
  87                         label = "CFE";
  88                         reg = <0x000000 0x020000>;
  89                         read-only;
  90                 };
  91
  92                 linux@20000 {
  93                         label = "linux";
  94                         reg = <0x020000 0xfc0000>;
  95                         compatible = "brcm,bcm963xx-imagetag";
  96                 };
  97
  98                 nvram@fe0000 {
  99                         label = "nvram";
 100                         reg = <0xfe0000 0x020000>;
 101                 };
 102         };
 103 };
 104
 105 &pinctrl {
 106         pinctrl-names = "default";
 107         pinctrl-0 = <&pinctrl_pci>;
 108 };
 109
 110 &uart0 {
 111         status = "okay";
 112 };