1 // SPDX-License-Identifier: GPL-2.0-or-later
5 #include <dt-bindings/clock/bcm6318-clock.h>
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/bcm6318-interrupt-controller.h>
9 #include <dt-bindings/reset/bcm6318-reset.h>
10 #include <dt-bindings/soc/bcm6318-pm.h>
15 compatible = "brcm,bcm6318";
24 bootargs = "console=ttyS0,115200n8 earlycon";
25 stdout-path = "serial0:115200n8";
29 periph_osc: periph-osc {
30 compatible = "fixed-clock";
34 clock-frequency = <50000000>;
35 clock-output-names = "periph";
38 hsspi_osc: hsspi-osc {
39 compatible = "fixed-clock";
43 clock-frequency = <250000000>;
44 clock-output-names = "hsspi_osc";
51 mips-hpt-frequency = <166500000>;
54 compatible = "brcm,bmips3300", "mips,mips4Kc";
60 cpu_intc: interrupt-controller {
62 compatible = "mti,cpu-interrupt-controller";
65 #interrupt-cells = <1>;
69 device_type = "memory";
77 compatible = "simple-bus";
80 periph_clk: clock-controller@10000004 {
81 compatible = "brcm,bcm6318-clocks";
82 reg = <0x10000004 0x4>;
86 ubus_clk: clock-controller@10000008 {
87 compatible = "brcm,bcm6318-ubus-clocks";
88 reg = <0x10000008 0x4>;
92 periph_rst: reset-controller@10000010 {
93 compatible = "brcm,bcm6345-reset";
94 reg = <0x10000010 0x4>;
98 ext_intc: interrupt-controller@10000018 {
100 compatible = "brcm,bcm6318-ext-intc";
101 reg = <0x10000018 0x4>;
103 interrupt-controller;
104 #interrupt-cells = <2>;
106 interrupts = <BCM6318_IRQ_EXT0>,
112 periph_intc: interrupt-controller@10000020 {
113 #address-cells = <1>;
114 compatible = "brcm,bcm6345-l1-intc";
115 reg = <0x10000020 0x20>;
117 interrupt-controller;
118 #interrupt-cells = <1>;
120 interrupt-parent = <&cpu_intc>;
121 interrupts = <2>, <3>;
124 wdt: watchdog@10000068 {
125 compatible = "brcm,bcm7038-wdt";
126 reg = <0x10000068 0xc>;
128 clocks = <&periph_osc>;
133 pll_cntl: syscon@10000074 {
134 compatible = "syscon";
135 reg = <0x10000074 0x4>;
140 compatible = "syscon-reboot";
141 regmap = <&pll_cntl>;
146 gpio: syscon@10000080 {
147 compatible = "syscon", "simple-mfd";
148 reg = <0x10000080 0x80>;
151 pinctrl: pin-controller {
152 compatible = "brcm,bcm6318-pinctrl";
157 interrupts-extended = <&ext_intc 0 0>,
159 interrupt-names = "gpio33",
162 pinctrl_ephy0_spd_led: ephy0_spd_led {
163 function = "ephy0_spd_led";
167 pinctrl_ephy1_spd_led: ephy1_spd_led {
168 function = "ephy1_spd_led";
172 pinctrl_ephy2_spd_led: ephy2_spd_led {
173 function = "ephy2_spd_led";
177 pinctrl_ephy3_spd_led: ephy3_spd_led {
178 function = "ephy3_spd_led";
182 pinctrl_ephy0_act_led: ephy0_act_led {
183 function = "ephy0_act_led";
187 pinctrl_ephy1_act_led: ephy1_act_led {
188 function = "ephy1_act_led";
192 pinctrl_ephy2_act_led: ephy2_act_led {
193 function = "ephy2_act_led";
197 pinctrl_ephy3_act_led: ephy3_act_led {
198 function = "ephy3_act_led";
202 pinctrl_serial_led: serial_led {
203 pinctrl_serial_led_data: serial_led_data {
204 function = "serial_led_data";
208 pinctrl_serial_led_clk: serial_led_clk {
209 function = "serial_led_clk";
214 pinctrl_inet_act_led: inet_act_led {
215 function = "inet_act_led";
219 pinctrl_inet_fail_led: inet_fail_led {
220 function = "inet_fail_led";
224 pinctrl_dsl_led: dsl_led {
225 function = "dsl_led";
229 pinctrl_post_fail_led: post_fail_led {
230 function = "post_fail_led";
234 pinctrl_wlan_wps_led: wlan_wps_led {
235 function = "wlan_wps_led";
239 pinctrl_usb_pwron: usb_pwron {
240 function = "usb_pwron";
244 pinctrl_usb_device_led: usb_device_led {
245 function = "usb_device_led";
249 pinctrl_usb_active: usb_active {
250 function = "usb_active";
256 uart0: serial@10000100 {
257 compatible = "brcm,bcm6345-uart";
258 reg = <0x10000100 0x18>;
260 interrupt-parent = <&periph_intc>;
261 interrupts = <BCM6318_IRQ_UART0>;
263 clocks = <&periph_osc>;
264 clock-names = "periph";
269 leds: led-controller@10000200 {
270 #address-cells = <1>;
272 compatible = "brcm,bcm6328-leds";
273 reg = <0x10000200 0x24>;
278 periph_pwr: power-controller@100008e8 {
279 compatible = "brcm,bcm6318-power-controller";
280 reg = <0x100008e8 0x4>;
282 #power-domain-cells = <1>;
285 hsspi: spi@10003000 {
286 compatible = "brcm,bcm6328-hsspi";
287 reg = <0x10003000 0x600>;
288 #address-cells = <1>;
291 interrupt-parent = <&periph_intc>;
292 interrupts = <BCM6318_IRQ_HSSPI>;
294 clocks = <&periph_clk BCM6318_CLK_HSSPI>,
296 clock-names = "hsspi",
299 resets = <&periph_rst BCM6318_RST_SPI>;
305 compatible = "brcm,bcm6318-ehci", "generic-ehci";
306 reg = <0x10005000 0x100>;
310 interrupt-parent = <&periph_intc>;
311 interrupts = <BCM6318_IRQ_EHCI>;
320 compatible = "brcm,bcm6318-ohci", "generic-ohci";
321 reg = <0x10005100 0x100>;
325 interrupt-parent = <&periph_intc>;
326 interrupts = <BCM6318_IRQ_OHCI>;
334 usbh: usb-phy@10005200 {
335 compatible = "brcm,bcm6318-usbh-phy";
336 reg = <0x10005200 0x38>;
340 clocks = <&periph_clk BCM6318_CLK_USBD>,
341 <&ubus_clk BCM6318_UCLK_USB>;
342 clock-names = "usbh",
345 power-domains = <&periph_pwr BCM6318_POWER_DOMAIN_USB>;
346 resets = <&periph_rst BCM6318_RST_USBH>;