1 // SPDX-License-Identifier: GPL-2.0-or-later
3 #include "bcm6328.dtsi"
6 model = "Arcadyan AR7516";
7 compatible = "arcadyan,ar7516", "brcm,bcm6328";
10 led-failsafe = &led_upgrade_green;
11 led-upgrade = &led_upgrade_green;
15 compatible = "gpio-keys-polled";
16 poll-interval = <100>;
20 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
21 linux,code = <KEY_RESTART>;
22 debounce-interval = <60>;
27 gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
28 linux,code = <KEY_WPS_BUTTON>;
29 debounce-interval = <60>;
34 compatible = "brcm,bcma-sprom";
39 nvmem-cells = <&macaddr_cfe_6a0>;
40 nvmem-cell-names = "mac-address";
41 mac-address-increment = <1>;
43 brcm,sprom = "brcm/bcm43227-sprom.bin";
54 nvmem-cells = <&macaddr_cfe_6a0>;
55 nvmem-cell-names = "mac-address";
62 compatible = "jedec,spi-nor";
63 spi-max-frequency = <16666667>;
64 spi-tx-bus-width = <2>;
65 spi-rx-bus-width = <2>;
69 compatible = "fixed-partitions";
75 reg = <0x000000 0x010000>;
80 compatible = "brcm,bcm963xx-imagetag";
82 reg = <0x010000 0x7e0000>;
87 reg = <0x7f0000 0x010000>;
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
98 &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led
101 led_upgrade_green: led@1 {
103 label = "green:upgrade";
115 label = "green:wifi";
130 pins = "gpio1", "gpio6", "gpio7";
140 phy-handle = <&phy1>;
148 phy-handle = <&phy2>;
156 phy-handle = <&phy3>;
164 phy-handle = <&phy4>;
179 compatible = "nvmem-cells";
180 #address-cells = <1>;
183 macaddr_cfe_6a0: macaddr@6a0 {