1 // SPDX-License-Identifier: GPL-2.0-or-later
3 #include "bcm6328.dtsi"
6 model = "Comtrend AR-5387un";
7 compatible = "comtrend,ar-5387un", "brcm,bcm6328";
10 led-boot = &led_power_green;
11 led-failsafe = &led_power_red;
12 led-running = &led_power_green;
13 led-upgrade = &led_power_green;
15 led-dsl = &led_dsl_green;
16 led-internet = &led_internet_green;
20 compatible = "gpio-keys-polled";
25 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
27 debounce-interval = <60>;
32 compatible = "brcm,bcma-sprom";
37 nvmem-cells = <&macaddr_cfe_6a0>;
38 nvmem-cell-names = "mac-address";
39 mac-address-increment = <1>;
41 brcm,sprom = "brcm/bcm43225-sprom.bin";
42 brcm,sprom-fixups = <2 0x05bb>,
76 nvmem-cells = <&macaddr_cfe_6a0>;
77 nvmem-cell-names = "mac-address";
84 compatible = "jedec,spi-nor";
85 spi-max-frequency = <16666667>;
86 spi-tx-bus-width = <2>;
87 spi-rx-bus-width = <2>;
94 compatible = "fixed-partitions";
99 reg = <0x000000 0x010000>;
105 compatible = "brcm,bcm963xx-imagetag";
106 reg = <0x010000 0xfe0000>;
111 reg = <0xff0000 0x010000>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&pinctrl_leds>;
126 label = "red:internet";
129 led_power_red: led@4 {
134 led_internet_green: led@7 {
136 label = "green:internet";
139 led_power_green: led@8 {
141 label = "green:power";
144 led_dsl_green: led@11 {
162 pins = "gpio1", "gpio4", "gpio7",
173 phy-handle = <&phy1>;
181 phy-handle = <&phy2>;
189 phy-handle = <&phy3>;
197 phy-handle = <&phy4>;
212 compatible = "nvmem-cells";
213 #address-cells = <1>;
216 macaddr_cfe_6a0: macaddr@6a0 {