target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 #include "bcm6358.dtsi"
   4
   5 / {
   6         compatible = "huawei,hg556a-b", "brcm,bcm6358";
   7         model = "Huawei EchoLife HG556a (version B)";
   8
   9         aliases {
  10                 led-boot = &led_power_red;
  11                 led-failsafe = &led_power_red;
  12                 led-running = &led_power_red;
  13                 led-upgrade = &led_power_red;
  14
  15                 led-dsl = &led_dsl_red;
  16                 led-usb = &led_hspa_red;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys-polled";
  21                 poll-interval = <20>;
  22
  23                 help {
  24                         label = "help";
  25                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_HELP>;
  27                         debounce-interval = <60>;
  28                 };
  29
  30                 wlan {
  31                         label = "wlan";
  32                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_WLAN>;
  34                         debounce-interval = <60>;
  35                 };
  36
  37                 restart {
  38                         label = "restart";
  39                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
  40                         linux,code = <KEY_RESTART>;
  41                         debounce-interval = <60>;
  42                 };
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_CONFIG>;
  48                         debounce-interval = <60>;
  49                 };
  50         };
  51
  52         leds {
  53                 compatible = "gpio-leds";
  54
  55                 led@0 {
  56                         label = "red:message";
  57                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 led_hspa_red: led@1 {
  61                         label = "red:hspa";
  62                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 led_dsl_red: led@2 {
  66                         label = "red:dsl";
  67                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 led_power_red: led@3 {
  71                         label = "red:power";
  72                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 led@6 {
  76                         label = "all";
  77                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  78                         default-state = "on";
  79                 };
  80
  81                 led@12 {
  82                         label = "green:lan1";
  83                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 led@13 {
  87                         label = "red:lan1";
  88                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  89                 };
  90
  91                 led@15 {
  92                         label = "green:lan2";
  93                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  94                 };
  95
  96                 led@22 {
  97                         label = "red:lan2";
  98                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  99                 };
 100
 101                 led@23 {
 102                         label = "green:lan3";
 103                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
 104                 };
 105
 106                 led@26 {
 107                         label = "red:lan3";
 108                         gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
 109                 };
 110
 111                 led@27 {
 112                         label = "green:lan4";
 113                         gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
 114                 };
 115
 116                 led@28 {
 117                         label = "red:lan4";
 118                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 119                 };
 120         };
 121
 122         ath9k-fixup {
 123                 compatible = "brcm,ath9k-fixup";
 124                 reg = <0x30000000 0x8000000>;
 125
 126                 pci-dev = <1>;
 127
 128                 nvmem-cells = <&macaddr_cfe_6a0>;
 129                 nvmem-cell-names = "mac-address";
 130                 mac-address-increment = <1>;
 131
 132                 ath,eeprom = <&cal_data 0x1e000>;
 133                 ath,endian-check;
 134                 ath,led-pin = <2>;
 135                 ath,led-active-high;
 136         };
 137 };
 138
 139 &ehci {
 140         status = "okay";
 141 };
 142
 143 &ethernet1 {
 144         status = "okay";
 145
 146         nvmem-cells = <&macaddr_cfe_6a0>;
 147         nvmem-cell-names = "mac-address";
 148 };
 149
 150 &iudma {
 151         status = "okay";
 152 };
 153
 154 &ohci {
 155         status = "okay";
 156 };
 157
 158 &pci {
 159         status = "okay";
 160 };
 161
 162 &pflash {
 163         status = "okay";
 164
 165         partitions {
 166                 compatible = "fixed-partitions";
 167                 #address-cells = <1>;
 168                 #size-cells = <1>;
 169
 170                 cfe: partition@0 {
 171                         label = "cfe";
 172                         reg = <0x000000 0x020000>;
 173                         read-only;
 174                 };
 175
 176                 partition@20000 {
 177                         label = "firmware";
 178                         reg = <0x020000 0xec0000>;
 179                         compatible = "brcm,bcm963xx-imagetag";
 180                 };
 181
 182                 cal_data: partition@ee0000 {
 183                         label = "cal_data";
 184                         reg = <0xee0000 0x100000>;
 185                         read-only;
 186                 };
 187
 188                 partition@fe0000 {
 189                         label = "nvram";
 190                         reg = <0xfe0000 0x020000>;
 191                 };
 192         };
 193 };
 194
 195 &uart0 {
 196         status = "okay";
 197 };
 198
 199 &usbh {
 200         status = "okay";
 201 };
 202
 203 &cfe {
 204         compatible = "nvmem-cells";
 205         #address-cells = <1>;
 206         #size-cells = <1>;
 207
 208         macaddr_cfe_6a0: macaddr@6a0 {
 209                 reg = <0x6a0 0x6>;
 210         };
 211 };