1 // SPDX-License-Identifier: GPL-2.0-or-later
5 #include <dt-bindings/clock/bcm6362-clock.h>
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h>
9 #include <dt-bindings/reset/bcm6362-reset.h>
10 #include <dt-bindings/soc/bcm6362-pm.h>
15 compatible = "brcm,bcm6362";
27 bootargs = "console=ttyS0,115200n8 earlycon";
28 stdout-path = "serial0:115200n8";
32 periph_osc: periph-osc {
33 compatible = "fixed-clock";
37 clock-frequency = <50000000>;
38 clock-output-names = "periph";
41 hsspi_osc: hsspi-osc {
42 compatible = "fixed-clock";
46 clock-frequency = <400000000>;
47 clock-output-names = "hsspi_osc";
54 mips-hpt-frequency = <200000000>;
57 compatible = "brcm,bmips4350", "mips,mips4Kc";
63 compatible = "brcm,bmips4350", "mips,mips4Kc";
69 cpu_intc: interrupt-controller {
71 compatible = "mti,cpu-interrupt-controller";
74 #interrupt-cells = <1>;
78 device_type = "memory";
86 compatible = "simple-bus";
89 periph_clk: clock-controller@10000004 {
90 compatible = "brcm,bcm6362-clocks";
91 reg = <0x10000004 0x4>;
95 pll_cntl: syscon@10000008 {
96 compatible = "syscon";
97 reg = <0x10000008 0x4>;
102 compatible = "syscon-reboot";
103 regmap = <&pll_cntl>;
108 periph_rst: reset-controller@10000010 {
109 compatible = "brcm,bcm6345-reset";
110 reg = <0x10000010 0x4>;
114 ext_intc: interrupt-controller@10000018 {
115 #address-cells = <1>;
116 compatible = "brcm,bcm6345-ext-intc";
117 reg = <0x10000018 0x4>;
119 interrupt-controller;
120 #interrupt-cells = <2>;
122 interrupts = <BCM6362_IRQ_EXT0>,
128 periph_intc: interrupt-controller@10000020 {
129 #address-cells = <1>;
130 compatible = "brcm,bcm6345-l1-intc";
131 reg = <0x10000020 0x10>,
134 interrupt-controller;
135 #interrupt-cells = <1>;
137 interrupt-parent = <&cpu_intc>;
138 interrupts = <2>, <3>;
141 wdt: watchdog@1000005c {
142 compatible = "brcm,bcm7038-wdt";
143 reg = <0x1000005c 0xc>;
145 clocks = <&periph_osc>;
150 pinctrl: pin-controller@10000080 {
151 compatible = "brcm,bcm6362-pinctrl";
152 reg = <0x10000080 0x8>,
158 reg-names = "dirout", "dat", "led",
159 "mode", "ctrl", "basemode";
164 interrupt-parent = <&ext_intc>;
165 interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
166 interrupt-names = "gpio24", "gpio25",
169 pinctrl_usb_device_led: usb_device_led {
170 function = "usb_device_led";
174 pinctrl_sys_irq: sys_irq {
175 function = "sys_irq";
179 pinctrl_serial_led: serial_led {
180 pinctrl_serial_led_clk: serial_led_clk {
181 function = "serial_led_clk";
185 pinctrl_serial_led_data: serial_led_data {
186 function = "serial_led_data";
191 pinctrl_robosw_led_data: robosw_led_data {
192 function = "robosw_led_data";
196 pinctrl_robosw_led_clk: robosw_led_clk {
197 function = "robosw_led_clk";
201 pinctrl_robosw_led0: robosw_led0 {
202 function = "robosw_led0";
206 pinctrl_robosw_led1: robosw_led1 {
207 function = "robosw_led1";
211 pinctrl_inet_led: inet_led {
212 function = "inet_led";
216 pinctrl_spi_cs2: spi_cs2 {
217 function = "spi_cs2";
221 pinctrl_spi_cs3: spi_cs3 {
222 function = "spi_cs3";
226 pinctrl_ntr_pulse: ntr_pulse {
227 function = "ntr_pulse";
231 pinctrl_uart1_scts: uart1_scts {
232 function = "uart1_scts";
236 pinctrl_uart1_srts: uart1_srts {
237 function = "uart1_srts";
241 pinctrl_uart1: uart1 {
242 pinctrl_uart1_sdin: uart1_sdin {
243 function = "uart1_sdin";
247 pinctrl_uart1_sdout: uart1_sdout {
248 function = "uart1_sdout";
253 pinctrl_adsl_spi: adsl_spi {
254 pinctrl_adsl_spi_miso: adsl_spi_miso {
255 function = "adsl_spi_miso";
259 pinctrl_adsl_spi_mosi: adsl_spi_mosi {
260 function = "adsl_spi_mosi";
264 pinctrl_adsl_spi_clk: adsl_spi_clk {
265 function = "adsl_spi_clk";
269 pinctrl_adsl_spi_cs: adsl_spi_cs {
270 function = "adsl_spi_cs";
275 pinctrl_ephy0_led: ephy0_led {
276 function = "ephy0_led";
280 pinctrl_ephy1_led: ephy1_led {
281 function = "ephy1_led";
285 pinctrl_ephy2_led: ephy2_led {
286 function = "ephy2_led";
290 pinctrl_ephy3_led: ephy3_led {
291 function = "ephy3_led";
295 pinctrl_ext_irq0: ext_irq0 {
296 function = "ext_irq0";
300 pinctrl_ext_irq1: ext_irq1 {
301 function = "ext_irq1";
305 pinctrl_ext_irq2: ext_irq2 {
306 function = "ext_irq2";
310 pinctrl_ext_irq3: ext_irq3 {
311 function = "ext_irq3";
321 uart0: serial@10000100 {
322 compatible = "brcm,bcm6345-uart";
323 reg = <0x10000100 0x18>;
325 interrupt-parent = <&periph_intc>;
326 interrupts = <BCM6362_IRQ_UART0>;
328 clocks = <&periph_osc>;
329 clock-names = "periph";
334 uart1: serial@10000120 {
335 compatible = "brcm,bcm6345-uart";
336 reg = <0x10000120 0x18>;
338 interrupt-parent = <&periph_intc>;
339 interrupts = <BCM6362_IRQ_UART1>;
341 clocks = <&periph_osc>;
342 clock-names = "periph";
347 nflash: nand@10000200 {
348 #address-cells = <1>;
350 compatible = "brcm,nand-bcm6368",
351 "brcm,brcmnand-v2.2",
353 reg = <0x10000200 0x180>,
360 interrupt-parent = <&periph_intc>;
361 interrupts = <BCM6362_IRQ_NAND>;
363 clocks = <&periph_clk BCM6362_CLK_NAND>;
364 clock-names = "nand";
366 pinctrl-names = "default";
367 pinctrl-0 = <&pinctrl_nand>;
372 lsspi: spi@10000800 {
373 compatible = "brcm,bcm6358-spi";
374 reg = <0x10000800 0x70c>;
375 #address-cells = <1>;
378 interrupt-parent = <&periph_intc>;
379 interrupts = <BCM6362_IRQ_LSSPI>;
381 clocks = <&periph_clk BCM6362_CLK_SPI>;
384 resets = <&periph_rst BCM6362_RST_SPI>;
389 hsspi: spi@10001000 {
390 compatible = "brcm,bcm6328-hsspi";
391 reg = <0x10001000 0x600>;
392 #address-cells = <1>;
395 interrupt-parent = <&periph_intc>;
396 interrupts = <BCM6362_IRQ_HSSPI>;
398 clocks = <&periph_clk BCM6362_CLK_HSSPI>,
400 clock-names = "hsspi",
403 resets = <&periph_rst BCM6362_RST_SPI>;
408 periph_pwr: power-controller@10001848 {
409 compatible = "brcm,bcm6362-power-controller";
410 reg = <0x10001848 0x4>;
411 #power-domain-cells = <1>;
414 leds: led-controller@10001900 {
415 #address-cells = <1>;
417 compatible = "brcm,bcm6328-leds";
418 reg = <0x10001900 0x24>;
424 compatible = "brcm,bcm6362-ehci", "generic-ehci";
425 reg = <0x10002500 0x100>;
429 interrupt-parent = <&periph_intc>;
430 interrupts = <BCM6362_IRQ_EHCI>;
439 compatible = "brcm,bcm6362-ohci", "generic-ohci";
440 reg = <0x10002600 0x100>;
444 interrupt-parent = <&periph_intc>;
445 interrupts = <BCM6362_IRQ_OHCI>;
453 usbh: usb-phy@10002700 {
454 compatible = "brcm,bcm6362-usbh-phy";
455 reg = <0x10002700 0x38>;
459 clocks = <&periph_clk BCM6362_CLK_USBH>;
460 clock-names = "usbh";
462 power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_USBH>;
463 resets = <&periph_rst BCM6362_RST_USBH>;