target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt

   1 # NVRAM file for BCM943430WLPTH
   2 # 2.4 GHz, 20 MHz BW mode
   3
   4 # The following parameter values are just placeholders, need to be updated.
   5 manfid=0x2d0
   6 prodid=0x0727
   7 vendid=0x14e4
   8 devid=0x43e2
   9 boardtype=0x0727
  10 boardrev=0x1101
  11 boardnum=22
  12 macaddr=00:90:4c:c5:12:38
  13 sromrev=11
  14 boardflags=0x00404201
  15 boardflags3=0x08000000
  16 xtalfreq=37400
  17 nocrc=1
  18 ag0=255
  19 aa2g=1
  20 ccode=ALL
  21
  22 pa0itssit=0x20
  23 extpagain2g=0
  24 #PA parameters for 2.4GHz, measured at CHIP OUTPUT
  25 pa2ga0=-168,7161,-820
  26 AvVmid_c0=0x0,0xc8
  27 cckpwroffset0=5
  28
  29 # PPR params
  30 maxp2ga0=84
  31 txpwrbckof=6
  32 cckbw202gpo=0
  33 legofdmbw202gpo=0x66111111
  34 mcsbw202gpo=0x77711111
  35 propbw202gpo=0xdd
  36
  37 # OFDM IIR :
  38 ofdmdigfilttype=18
  39 ofdmdigfilttypebe=18
  40 # PAPD mode:
  41 papdmode=1
  42 papdvalidtest=1
  43 pacalidx2g=42
  44 papdepsoffset=-22
  45 papdendidx=58
  46
  47 # LTECX flags
  48 ltecxmux=0
  49 ltecxpadnum=0x0102
  50 ltecxfnsel=0x44
  51 ltecxgcigpio=0x01
  52
  53 il0macaddr=00:90:4c:c5:12:38
  54 wl0id=0x431b
  55
  56 deadman_to=0xffffffff
  57 # muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
  58 muxenab=0x1
  59 # CLDO PWM voltage settings - 0x4 - 1.1 volt
  60 #cldo_pwm=0x4
  61
  62 #VCO freq 326.4MHz
  63 spurconfig=0x3
  64
  65 edonthd20l=-75
  66 edoffthd20ul=-80