1 #!/bin/sh /etc/rc.common
2 # Copyright (C) 2006 OpenWrt.org
7 [ -e /etc
/config
/network
] && {
18 append
batch "delete network.eth0.${1}${N}"
19 append
batch "set network.eth0_${id}=switch_vlan${N}"
20 append
batch "set network.eth0_${id}.device=eth0${N}"
21 append
batch "set network.eth0_${id}.vlan=${id}${N}"
22 append
batch "set network.eth0_${id}.ports='${ports}'${N}"
37 logger
-t netconfig
"migrating switch config to new format ..."
38 echo "$batch${N}commit network" | uci
batch
47 [ -e /sbin
/swconfig
] && cpuport
=$
(swconfig dev switch0
help 2>/dev
/null |
sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")
50 if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
52 echo boardtype=wgt634u
54 strings "$(find_mtd_part nvram)"
56 ) | awk -v cpuport="$cpuport" '
57 function macinc(mac, maca, i, result) {
59 for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
60 if (++maca[6] > 0xff) {
64 for (i = 1; i <= 6; i++) {
65 if (i != 1) result = result ":"
66 result = result sprintf("%02x", maca[i])
73 c["lan_ifname"]="eth0.1"
74 c["wan_ifname"]="eth0.2"
75 c["vlan1ports"]="1 2 3 4 5t"
76 c["vlan2ports"]="0 5t"
77 getline < "/proc/diag/model"
79 for (i = 0; i < 6; i++) {
80 if (mac_check != "") mac_check = mac_check ":"
81 mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
84 c["vlan1ports"]="1 2 3 4 8t"
85 c["vlan2ports"]="0 8t"
89 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) || \
90 ($1 ~ /^vlan[0-9]{1,2}ports$/) {
95 if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
96 ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8"))) || \
97 ((nvram["vlan2ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8")))) {
98 c["vlan1ports"] = "0 1 2 3 8t"
99 c["vlan2ports"] = "4 8t"
101 if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
102 ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5"))) || \
103 ((nvram["vlan2ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5")))) {
104 c["vlan1ports"] = "0 1 2 3 5t"
105 c["vlan2ports"] = "4 5t"
107 if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
109 c["lan_ifname"] = "eth1"
111 if (model == "ASUS WL-330gE") {
113 c["lan_ifname"] = "eth0.1"
114 c["vlan1ports"] = "4 5t"
117 if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
118 c["wan_ifname"] = "eth1"
119 c["lan_ifname"] = "eth0"
121 if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
122 c["vlan1ports"] = "0 1 2 3 5t"
123 c["vlan2ports"] = "4 5t"
125 if (model == "Dell TrueMobile 2300") {
126 c["lan_ifname"] = "eth0"
127 c["wan_ifname"] = "eth1"
128 c["vlan1ports"] = "0 1 2 3 4 5"
131 if (nvram["boardtype"] == "bcm94710r4") {
133 c["lan_ifname"] = "eth0"
134 c["wan_ifname"] = "eth1"
136 if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
137 c["vlan1ports"] = "0 1 2 3 5t"
138 c["vlan2ports"] = "4 5t"
140 if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
141 if (nvram["boardnum"] == "45") {
143 c["vlan1ports"] = "1 2 3 4 5t"
144 c["vlan2ports"] = "0 5t"
147 c["vlan1ports"] = "0 1 2 3 4 5"
149 c["lan_ifname"] = "eth0"
150 c["wan_ifname"] = "eth1"
152 # MAC addresses on 4704 tend to be screwed up. Add a workaround here
153 if (nvram["et0macaddr"] ~ mac_check) {
154 c["lan_macaddr"] = nvram["et0macaddr"]
155 c["wan_macaddr"] = macinc(c["lan_macaddr"])
159 # Buffalo WBR-B11 and Buffalo WBR-G54
160 if (nvram["boardtype"] == "bcm94710ap") {
161 c["vlan1ports"] = "0 1 2 3 4 5"
163 c["lan_ifname"] = "eth0"
164 c["wan_ifname"] = "eth1"
168 if ((nvram["boardnum"] == "2") || \
169 (nvram["boardnum"] == "1024")) {
170 c["lan_ifname"]="eth0"
175 if ((nvram["boardum"] == "2") && \
176 (nvram["GemtekPmonVer"] == "1")) {
177 c["lan_ifname"]="eth0"
182 # These are actually same as defaults above. For some reason this script applies
183 # Generic BCM94704 settings instead so we revert to proper settings here.
184 # Hopefully someone will fix this properly soon.
185 if (model == "ASUS WL-700gE") {
186 c["lan_ifname"]="eth0.1"
187 c["wan_ifname"]="eth0.2"
188 c["vlan1ports"]="1 2 3 4 5t"
189 c["vlan2ports"]="0 5t"
191 if ((model == "Motorola WR850G V2/V3") || (model == "Siemens SE505 V2")) {
192 c["vlan1ports"]="0 1 2 3 5t"
193 c["vlan2ports"]="4 5t"
195 if (model == "ASUS WL-500W") {
196 c["lan_ifname"] = "eth0"
197 c["wan_ifname"] = "eth1"
198 c["vlan1ports"] = "0 1 2 3 4 5"
201 if (model == "OvisLink WL-1600GL") {
202 c["lan_ifname"] = "eth0.1"
203 c["wan_ifname"] = "eth0.2"
204 c["vlan1ports"] = "0 1 2 3 5t"
205 c["vlan2ports"] = "4 5t"
207 if (model == "SimpleTech SimpleShare NAS") {
208 c["lan_ifname"] = "eth0"
213 print "local vlan1ports=\"" c["vlan1ports"] "\";"
214 print "local vlan2ports=\"" c["vlan2ports"] "\";"
215 print "local lan_ifname=\"" c["lan_ifname"] "\";"
216 print "local lan_macaddr=\"" c["lan_macaddr"] "\";"
217 print "local wan_ifname=\"" c["wan_ifname"] "\";"
218 print "local wan_macaddr=\"" c["wan_macaddr"] "\";"
221 .
/lib
/functions
/uci-defaults.sh
223 touch /etc
/config
/network
227 [ -n "$vlan1ports" -o -n "$vlan2ports" ] && {
228 local cfg
=`ucidef_add_switch "switch0" 1 1`
229 [ -n "$cfg" ] && uci rename network.
$cfg=eth0
230 [ -n "$vlan1ports" ] && {
231 cfg
=`ucidef_add_switch_vlan "switch0" 1 "$vlan1ports"`
232 [ -n "$cfg" ] && uci rename network.
$cfg=eth0_1
234 [ -n "$vlan2ports" ] && {
235 cfg
=`ucidef_add_switch_vlan "switch0" 2 "$vlan2ports"`
236 [ -n "$cfg" ] && uci rename network.
$cfg=eth0_2
240 ucidef_set_interface_loopback
242 ucidef_set_interface_lan
"$lan_ifname"
243 [ -n "$lan_macaddr" ] && ucidef_set_interface_macaddr lan
"$lan_macaddr"
245 [ -n "$wan_ifname" ] && {
246 ucidef_set_interface_wan
"$wan_ifname"
247 [ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr wan
"$wan_macaddr"