target/linux/brcm63xx/dts/a4001n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ADB P.DG A4001N";
   9         compatible = "adb,a4001n", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&gpio0 23 1>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27                 wps {
  28                         label = "wps";
  29                         gpios = <&gpio0 24 1>;
  30                         linux,code = <KEY_WPS_BUTTON>;
  31                 };
  32         };
  33
  34         gpio-leds {
  35                 compatible = "gpio-leds";
  36
  37                 inet_red {
  38                         label = "A4001N:red:inet";
  39                         gpios = <&gpio0 1 0>;
  40                 };
  41                 power_red {
  42                         label = "A4001N:red:power";
  43                         gpios = <&gpio0 4 0>;
  44                 };
  45                 power_green {
  46                         label = "A4001N:green:power";
  47                         gpios = <&gpio0 8 0>;
  48                         default-state = "on";
  49                 };
  50                 usb_green {
  51                         label = "A4001N:green:usb";
  52                         gpios = <&gpio0 10 1>;
  53                 };
  54                 dsl_green {
  55                         label = "A4001N:green:dsl";
  56                         gpios = <&gpio0 11 1>;
  57                 };
  58         };
  59 };
  60
  61 &hsspi {
  62         status = "ok";
  63
  64         flash@0 {
  65                 compatible = "jedec,spi-nor";
  66                 spi-max-frequency = <16666667>;
  67                 spi-tx-bus-width = <2>;
  68                 spi-rx-bus-width = <2>;
  69                 reg = <0>;
  70
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73
  74                 cfe@0 {
  75                         reg = <0x000000 0x010000>;
  76                         label = "cfe";
  77                         read-only;
  78                 };
  79
  80                 firmware@10000 {
  81                         reg = <0x010000 0x7e0000>;
  82                         label = "firmware";
  83                 };
  84
  85                 nvram@7f0000 {
  86                         reg = <0x7f0000 0x010000>;
  87                         label = "nvram";
  88                 };
  89         };
  90 };