4 compatible = "brcm,bcm6328";
16 compatible = "brcm,bmips4350", "mips,mips4Kc";
22 cpu_intc: interrupt-controller {
24 compatible = "mti,cpu-interrupt-controller";
27 #interrupt-cells = <1>;
30 memory { device_type = "memory"; reg = <0 0>; };
36 compatible = "simple-bus";
37 interrupt-parent = <&periph_intc>;
39 ext_intc: interrupt-controller@10000018 {
40 compatible = "brcm,bcm6345-ext-intc";
41 reg = <0x10000018 0x4>;
44 #interrupt-cells = <2>;
46 interrupts = <24>, <25>, <26>, <27>;
49 periph_intc: interrupt-controller@10000020 {
50 compatible = "brcm,bcm6345-l1-intc";
51 reg = <0x10000020 0x10>;
54 #interrupt-cells = <1>;
56 interrupt-parent = <&cpu_intc>;
60 pinctrl: pin-controller@10000080 {
61 compatible = "brcm,bcm6328-pinctrl";
62 reg = <0x10000080 0x8>,
66 reg-names = "dirout", "dat", "mode", "mux";
71 interrupt-parent = <&ext_intc>;
72 interrupts = <3 0>, <2 0>, <0 0>, <1 0>;
73 interrupt-names = "gpio12", "gpio15",
76 pinctrl_serial_led: serial_led {
77 pinctrl_serial_led_data: serial_led_data {
78 function = "serial_led_data";
82 pinctrl_serial_led_clk: serial_led_clk {
83 function = "serial_led_clk";
88 pinctrl_inet_act_led: inet_act_led {
89 function = "inet_act_led";
93 pinctrl_pcie_clkreq: pcie_clkreq {
94 function = "pcie_clkreq";
98 pinctrl_ephy0_spd_led: ephy0_spd_led {
103 pinctrl_ephy1_spd_led: ephy1_spd_led {
108 pinctrl_ephy2_spd_led: ephy2_spd_led {
113 pinctrl_ephy3_spd_led: ephy3_spd_led {
118 pinctrl_ephy0_act_led: ephy0_act_led {
119 function = "ephy0_act_led";
123 pinctrl_ephy1_act_led: ephy1_act_led {
124 function = "ephy1_act_led";
128 pinctrl_ephy2_act_led: ephy2_act_led {
129 function = "ephy2_act_led";
133 pinctrl_ephy3_act_led: ephy3_act_led {
134 function = "ephy3_act_led";
138 pinctrl_hsspi_cs1: hsspi_cs1 {
139 function = "hsspi_cs1";
143 pinctrl_usb_port1_device: usb_port1_device {
144 function = "usb_device_port";
148 pinctrl_usb_port1_host: usb_port1_host {
149 function = "usb_host_port";
154 leds: led-controller@10000800 {
155 #address-cells = <1>;
157 compatible = "brcm,bcm6328-leds";
158 reg = <0x10000800 0x24>;
162 hsspi: spi@10001000 {
163 #address-cells = <1>;
165 compatible = "brcm,bcm6328-hsspi";
166 reg = <0x10001000 0x600>;
168 /* clocks = <&clkctl 9>; */