4 compatible = "brcm,bcm6358";
17 compatible = "brcm,bmips4350", "mips,mips4Kc";
23 compatible = "brcm,bmips4350", "mips,mips4Kc";
29 cpu_intc: interrupt-controller {
31 compatible = "mti,cpu-interrupt-controller";
34 #interrupt-cells = <1>;
37 memory { device_type = "memory"; reg = <0 0>; };
39 pflash: nor@1e000000 {
40 compatible = "cfi-flash";
41 reg = <0x1e000000 0x2000000>;
53 compatible = "simple-bus";
54 interrupt-parent = <&periph_intc>;
56 periph_intc: interrupt-controller@fffe000c {
57 compatible = "brcm,bcm6345-l1-intc";
58 reg = <0xfffe000c 0x8>,
62 #interrupt-cells = <1>;
64 interrupt-parent = <&cpu_intc>;
65 interrupts = <2>, <3>;
68 ext_intc0: interrupt-controller@fffe0014 {
69 compatible = "brcm,bcm6345-ext-intc";
70 reg = <0xfffe0014 0x4>;
73 #interrupt-cells = <2>;
75 interrupts = <25>, <26>, <27>, <28>;
78 ext_intc1: interrupt-controller@fffe001c {
79 compatible = "brcm,bcm6345-ext-intc";
80 reg = <0xfffe001c 0x4>;
83 #interrupt-cells = <2>;
85 interrupts = <20>, <21>;
88 pinctrl: pin-controller@fffe0080 {
89 compatible = "brcm,bcm6358-pinctrl";
90 reg = <0xfffe0080 0x8>,
92 reg-names = "dirout", "dat", "mode";
93 brcm,gpiomode = <&gpiomode>;
98 interrupts-extended = <&ext_intc1 0 0>,
104 interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
107 pinctrl_ebi_cs: ebi_cs {
109 groups = "ebi_cs_grp";
112 pinctrl_uart1: uart1 {
114 groups = "uart1_grp";
117 pinctrl_serial_led: serial_led {
118 function = "serial_led";
119 groups = "serial_led_grp";
122 pinctrl_legacy_led: legacy_led {
123 function = "legacy_led";
124 groups = "legacy_led_grp";
132 pinctrl_spi_cs_23: spi_cs {
134 groups = "spi_cs_grp";
137 pinctrl_utopia: utopia {
139 groups = "utopia_grp";
142 pinctrl_pwm_syn_clk: pwm_syn_clk {
143 function = "pwm_syn_clk";
144 groups = "pwm_syn_clk_grp";
147 pinctrl_sys_irq: sys_irq {
148 function = "sys_irq";
149 groups = "sys_irq_grp";
153 gpiomode: gpiomode@fffe0098 {
154 compatible = "brcm,bcm6358-gpiomode", "syscon";
155 reg = <0xfffe0098 0x4>;
158 leds: led-controller@fffe00d0 {
159 #address-cells = <1>;
161 compatible = "brcm,bcm6358-leds";
162 reg = <0xfffe00d0 0x8>;
166 lsspi: spi@fffe0800 {
167 #address-cells = <1>;
169 compatible = "brcm,bcm6358-spi";
170 reg = <0xfffe0800 0x70c>;
172 /* clocks = <&clkctl 9>; */