3 #include "bcm6318.dtsi"
5 #include <dt-bindings/input/input.h>
8 model = "Sagem F@ST2704N";
9 compatible = "sagem,f@st2704n", "brcm,bcm6318";
12 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
16 compatible = "gpio-keys-polled";
20 debounce-interval = <60>;
24 gpios = <&pinctrl 1 0>;
25 linux,code = <KEY_WLAN>;
29 gpios = <&pinctrl 33 1>;
30 linux,code = <KEY_WPS_BUTTON>;
34 gpios = <&pinctrl 34 1>;
35 linux,code = <KEY_RESTART>;
40 compatible = "gpio-leds";
43 label = "F@ST2704N:green:wps";
44 gpios = <&pinctrl 2 1>;
47 label = "F@ST2704N:green:lan1";
48 gpios = <&pinctrl 4 1>;
51 label = "F@ST2704N:green:lan2";
52 gpios = <&pinctrl 5 1>;
55 label = "F@ST2704N:green:lan3";
56 gpios = <&pinctrl 6 1>;
59 label = "F@ST2704N:green:lan4";
60 gpios = <&pinctrl 7 1>;
63 label = "F@ST2704N:green:inet";
64 gpios = <&pinctrl 8 1>;
67 label = "F@ST2704N:red:inet";
68 gpios = <&pinctrl 9 1>;
71 label = "F@ST2704N:green:dsl";
72 gpios = <&pinctrl 10 1>;
75 label = "F@ST2704N:red:power";
76 gpios = <&pinctrl 11 1>;
79 label = "F@ST2704N:green:power";
80 gpios = <&pinctrl 47 1>;
84 label = "F@ST2704N:green:usb";
85 gpios = <&pinctrl 49 1>;
94 compatible = "jedec,spi-nor";
95 spi-max-frequency = <62500000>;
96 spi-tx-bus-width = <2>;
97 spi-rx-bus-width = <2>;
100 #address-cells = <1>;
103 linux,part-probe = "bcm63xxpart";
106 reg = <0x000000 0x010000>;
112 reg = <0x010000 0x7e0000>;
117 reg = <0x7f0000 0x010000>;