1 /* ==========================================================================
2 * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
7 * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
8 * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
9 * otherwise expressly agreed to in writing between Synopsys and you.
11 * The Software IS NOT an item of Licensed Software or Licensed Product under
12 * any End User Software License Agreement or Agreement for Licensed Product
13 * with Synopsys or any supplement thereto. You are permitted to use and
14 * redistribute this Software in source and binary forms, with or without
15 * modification, provided that redistributions of source code must retain this
16 * notice. You may not view, use, disclose, copy or distribute this file or
17 * any information contained herein except pursuant to this license grant from
18 * Synopsys. If you do not agree with this notice, including the disclaimer
19 * below, then you are not authorized to use the Software.
21 * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
25 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
26 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
28 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
32 * ========================================================================== */
33 #ifndef DWC_DEVICE_ONLY
35 #include <linux/version.h>
37 #include "otg_driver.h"
42 * This file contains the implementation of the HCD Interrupt handlers.
45 /** This function handles interrupts for the HCD. */
46 int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t
*dwc_otg_hcd
)
50 dwc_otg_core_if_t
*core_if
= dwc_otg_hcd
->core_if
;
51 gintsts_data_t gintsts
;
53 dwc_otg_core_global_regs_t
*global_regs
= core_if
->core_global_regs
;
56 /* Check if HOST Mode */
57 if (dwc_otg_is_host_mode(core_if
)) {
58 gintsts
.d32
= dwc_otg_read_core_intr(core_if
);
64 /* Don't print debug message in the interrupt handler on SOF */
66 if (gintsts
.d32
!= DWC_SOF_INTR_MASK
)
68 DWC_DEBUGPL(DBG_HCD_FLOOD
, "\n");
73 if (gintsts
.d32
!= DWC_SOF_INTR_MASK
)
75 DWC_DEBUGPL(DBG_HCD_FLOOD
, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts
.d32
);
77 if (gintsts
.b
.usbreset
) {
78 DWC_PRINT("Usb Reset In Host Mode\n");
80 if (gintsts
.b
.sofintr
) {
81 retval
|= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd
);
83 if (gintsts
.b
.rxstsqlvl
) {
84 retval
|= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd
);
86 if (gintsts
.b
.nptxfempty
) {
87 retval
|= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd
);
89 if (gintsts
.b
.i2cintr
) {
90 /** @todo Implement i2cintr handler. */
92 if (gintsts
.b
.portintr
) {
93 retval
|= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd
);
95 if (gintsts
.b
.hcintr
) {
96 retval
|= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd
);
98 if (gintsts
.b
.ptxfempty
) {
99 retval
|= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd
);
103 if (gintsts
.d32
!= DWC_SOF_INTR_MASK
)
106 DWC_DEBUGPL(DBG_HCD_FLOOD
, "DWC OTG HCD Finished Servicing Interrupts\n");
107 DWC_DEBUGPL(DBG_HCD_FLOOD
, "DWC OTG HCD gintsts=0x%08x\n",
108 dwc_read_reg32(&global_regs
->gintsts
));
109 DWC_DEBUGPL(DBG_HCD_FLOOD
, "DWC OTG HCD gintmsk=0x%08x\n",
110 dwc_read_reg32(&global_regs
->gintmsk
));
116 if (gintsts
.d32
!= DWC_SOF_INTR_MASK
)
118 DWC_DEBUGPL(DBG_HCD_FLOOD
, "\n");
122 S3C2410X_CLEAR_EINTPEND();
127 #ifdef DWC_TRACK_MISSED_SOFS
128 #warning Compiling code to track missed SOFs
129 #define FRAME_NUM_ARRAY_SIZE 1000
131 * This function is for debug only.
133 static inline void track_missed_sofs(uint16_t curr_frame_number
)
135 static uint16_t frame_num_array
[FRAME_NUM_ARRAY_SIZE
];
136 static uint16_t last_frame_num_array
[FRAME_NUM_ARRAY_SIZE
];
137 static int frame_num_idx
= 0;
138 static uint16_t last_frame_num
= DWC_HFNUM_MAX_FRNUM
;
139 static int dumped_frame_num_array
= 0;
141 if (frame_num_idx
< FRAME_NUM_ARRAY_SIZE
) {
142 if (((last_frame_num
+ 1) & DWC_HFNUM_MAX_FRNUM
) != curr_frame_number
) {
143 frame_num_array
[frame_num_idx
] = curr_frame_number
;
144 last_frame_num_array
[frame_num_idx
++] = last_frame_num
;
146 } else if (!dumped_frame_num_array
) {
148 printk(KERN_EMERG USB_DWC
"Frame Last Frame\n");
149 printk(KERN_EMERG USB_DWC
"----- ----------\n");
150 for (i
= 0; i
< FRAME_NUM_ARRAY_SIZE
; i
++) {
151 printk(KERN_EMERG USB_DWC
"0x%04x 0x%04x\n",
152 frame_num_array
[i
], last_frame_num_array
[i
]);
154 dumped_frame_num_array
= 1;
156 last_frame_num
= curr_frame_number
;
161 * Handles the start-of-frame interrupt in host mode. Non-periodic
162 * transactions may be queued to the DWC_otg controller for the current
163 * (micro)frame. Periodic transactions may be queued to the controller for the
166 int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t
*hcd
)
169 struct list_head
*qh_entry
;
171 dwc_otg_transaction_type_e tr_type
;
172 gintsts_data_t gintsts
= {.d32
= 0};
174 hfnum
.d32
= dwc_read_reg32(&hcd
->core_if
->host_if
->host_global_regs
->hfnum
);
177 DWC_DEBUGPL(DBG_HCD
, "--Start of Frame Interrupt--\n");
179 hcd
->frame_number
= hfnum
.b
.frnum
;
182 hcd
->frrem_accum
+= hfnum
.b
.frrem
;
183 hcd
->frrem_samples
++;
186 #ifdef DWC_TRACK_MISSED_SOFS
187 track_missed_sofs(hcd
->frame_number
);
190 /* Determine whether any periodic QHs should be executed. */
191 qh_entry
= hcd
->periodic_sched_inactive
.next
;
192 while (qh_entry
!= &hcd
->periodic_sched_inactive
) {
193 qh
= list_entry(qh_entry
, dwc_otg_qh_t
, qh_list_entry
);
194 qh_entry
= qh_entry
->next
;
195 if (dwc_frame_num_le(qh
->sched_frame
, hcd
->frame_number
)) {
197 * Move QH to the ready list to be executed next
200 list_move(&qh
->qh_list_entry
, &hcd
->periodic_sched_ready
);
204 tr_type
= dwc_otg_hcd_select_transactions(hcd
);
205 if (tr_type
!= DWC_OTG_TRANSACTION_NONE
) {
206 dwc_otg_hcd_queue_transactions(hcd
, tr_type
);
209 /* Clear interrupt */
210 gintsts
.b
.sofintr
= 1;
211 dwc_write_reg32(&hcd
->core_if
->core_global_regs
->gintsts
, gintsts
.d32
);
216 /** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
217 * least one packet in the Rx FIFO. The packets are moved from the FIFO to
218 * memory if the DWC_otg controller is operating in Slave mode. */
219 int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t
*dwc_otg_hcd
)
221 host_grxsts_data_t grxsts
;
224 DWC_DEBUGPL(DBG_HCD
, "--RxStsQ Level Interrupt--\n");
226 grxsts
.d32
= dwc_read_reg32(&dwc_otg_hcd
->core_if
->core_global_regs
->grxstsp
);
228 hc
= dwc_otg_hcd
->hc_ptr_array
[grxsts
.b
.chnum
];
231 DWC_DEBUGPL(DBG_HCDV
, " Ch num = %d\n", grxsts
.b
.chnum
);
232 DWC_DEBUGPL(DBG_HCDV
, " Count = %d\n", grxsts
.b
.bcnt
);
233 DWC_DEBUGPL(DBG_HCDV
, " DPID = %d, hc.dpid = %d\n", grxsts
.b
.dpid
, hc
->data_pid_start
);
234 DWC_DEBUGPL(DBG_HCDV
, " PStatus = %d\n", grxsts
.b
.pktsts
);
236 switch (grxsts
.b
.pktsts
) {
237 case DWC_GRXSTS_PKTSTS_IN
:
238 /* Read the data into the host buffer. */
239 if (grxsts
.b
.bcnt
> 0) {
240 dwc_otg_read_packet(dwc_otg_hcd
->core_if
,
244 /* Update the HC fields for the next packet received. */
245 hc
->xfer_count
+= grxsts
.b
.bcnt
;
246 hc
->xfer_buff
+= grxsts
.b
.bcnt
;
249 case DWC_GRXSTS_PKTSTS_IN_XFER_COMP
:
250 case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR
:
251 case DWC_GRXSTS_PKTSTS_CH_HALTED
:
252 /* Handled in interrupt, just ignore data */
255 DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts
.b
.pktsts
);
262 /** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
263 * data packets may be written to the FIFO for OUT transfers. More requests
264 * may be written to the non-periodic request queue for IN transfers. This
265 * interrupt is enabled only in Slave mode. */
266 int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t
*dwc_otg_hcd
)
268 DWC_DEBUGPL(DBG_HCD
, "--Non-Periodic TxFIFO Empty Interrupt--\n");
269 dwc_otg_hcd_queue_transactions(dwc_otg_hcd
,
270 DWC_OTG_TRANSACTION_NON_PERIODIC
);
274 /** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
275 * packets may be written to the FIFO for OUT transfers. More requests may be
276 * written to the periodic request queue for IN transfers. This interrupt is
277 * enabled only in Slave mode. */
278 int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t
*dwc_otg_hcd
)
280 DWC_DEBUGPL(DBG_HCD
, "--Periodic TxFIFO Empty Interrupt--\n");
281 dwc_otg_hcd_queue_transactions(dwc_otg_hcd
,
282 DWC_OTG_TRANSACTION_PERIODIC
);
286 /** There are multiple conditions that can cause a port interrupt. This function
287 * determines which interrupt conditions have occurred and handles them
289 int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t
*dwc_otg_hcd
)
293 hprt0_data_t hprt0_modify
;
295 hprt0
.d32
= dwc_read_reg32(dwc_otg_hcd
->core_if
->host_if
->hprt0
);
296 hprt0_modify
.d32
= dwc_read_reg32(dwc_otg_hcd
->core_if
->host_if
->hprt0
);
298 /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
301 hprt0_modify
.b
.prtena
= 0;
302 hprt0_modify
.b
.prtconndet
= 0;
303 hprt0_modify
.b
.prtenchng
= 0;
304 hprt0_modify
.b
.prtovrcurrchng
= 0;
306 /* Port Connect Detected
307 * Set flag and clear if detected */
308 if (hprt0
.b
.prtconndet
) {
309 DWC_DEBUGPL(DBG_HCD
, "--Port Interrupt HPRT0=0x%08x "
310 "Port Connect Detected--\n", hprt0
.d32
);
311 dwc_otg_hcd
->flags
.b
.port_connect_status_change
= 1;
312 dwc_otg_hcd
->flags
.b
.port_connect_status
= 1;
313 hprt0_modify
.b
.prtconndet
= 1;
315 /* B-Device has connected, Delete the connection timer. */
316 del_timer( &dwc_otg_hcd
->conn_timer
);
318 /* The Hub driver asserts a reset when it sees port connect
319 * status change flag */
323 /* Port Enable Changed
324 * Clear if detected - Set internal flag if disabled */
325 if (hprt0
.b
.prtenchng
) {
326 DWC_DEBUGPL(DBG_HCD
, " --Port Interrupt HPRT0=0x%08x "
327 "Port Enable Changed--\n", hprt0
.d32
);
328 hprt0_modify
.b
.prtenchng
= 1;
329 if (hprt0
.b
.prtena
== 1) {
331 dwc_otg_core_params_t
*params
= dwc_otg_hcd
->core_if
->core_params
;
332 dwc_otg_core_global_regs_t
*global_regs
= dwc_otg_hcd
->core_if
->core_global_regs
;
333 dwc_otg_host_if_t
*host_if
= dwc_otg_hcd
->core_if
->host_if
;
335 /* Check if we need to adjust the PHY clock speed for
336 * low power and adjust it */
337 if (params
->host_support_fs_ls_low_power
) {
338 gusbcfg_data_t usbcfg
;
340 usbcfg
.d32
= dwc_read_reg32(&global_regs
->gusbcfg
);
342 if (hprt0
.b
.prtspd
== DWC_HPRT0_PRTSPD_LOW_SPEED
||
343 hprt0
.b
.prtspd
== DWC_HPRT0_PRTSPD_FULL_SPEED
) {
348 if (usbcfg
.b
.phylpwrclksel
== 0) {
349 /* Set PHY low power clock select for FS/LS devices */
350 usbcfg
.b
.phylpwrclksel
= 1;
351 dwc_write_reg32(&global_regs
->gusbcfg
, usbcfg
.d32
);
355 hcfg
.d32
= dwc_read_reg32(&host_if
->host_global_regs
->hcfg
);
357 if (hprt0
.b
.prtspd
== DWC_HPRT0_PRTSPD_LOW_SPEED
&&
358 params
->host_ls_low_power_phy_clk
==
359 DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ
) {
361 DWC_DEBUGPL(DBG_CIL
, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
362 if (hcfg
.b
.fslspclksel
!= DWC_HCFG_6_MHZ
) {
363 hcfg
.b
.fslspclksel
= DWC_HCFG_6_MHZ
;
364 dwc_write_reg32(&host_if
->host_global_regs
->hcfg
,
370 DWC_DEBUGPL(DBG_CIL
, "FS_PHY programming HCFG to 48 MHz ()\n");
371 if (hcfg
.b
.fslspclksel
!= DWC_HCFG_48_MHZ
) {
372 hcfg
.b
.fslspclksel
= DWC_HCFG_48_MHZ
;
373 dwc_write_reg32(&host_if
->host_global_regs
->hcfg
,
382 if (usbcfg
.b
.phylpwrclksel
== 1) {
383 usbcfg
.b
.phylpwrclksel
= 0;
384 dwc_write_reg32(&global_regs
->gusbcfg
, usbcfg
.d32
);
390 tasklet_schedule(dwc_otg_hcd
->reset_tasklet
);
395 /* Port has been enabled set the reset change flag */
396 dwc_otg_hcd
->flags
.b
.port_reset_change
= 1;
399 dwc_otg_hcd
->flags
.b
.port_enable_change
= 1;
404 /** Overcurrent Change Interrupt */
405 if (hprt0
.b
.prtovrcurrchng
) {
406 DWC_DEBUGPL(DBG_HCD
, " --Port Interrupt HPRT0=0x%08x "
407 "Port Overcurrent Changed--\n", hprt0
.d32
);
408 dwc_otg_hcd
->flags
.b
.port_over_current_change
= 1;
409 hprt0_modify
.b
.prtovrcurrchng
= 1;
413 /* Clear Port Interrupts */
414 dwc_write_reg32(dwc_otg_hcd
->core_if
->host_if
->hprt0
, hprt0_modify
.d32
);
419 /** This interrupt indicates that one or more host channels has a pending
420 * interrupt. There are multiple conditions that can cause each host channel
421 * interrupt. This function determines which conditions have occurred for each
422 * host channel interrupt and handles them appropriately. */
423 int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t
*dwc_otg_hcd
)
429 /* Clear appropriate bits in HCINTn to clear the interrupt bit in
432 haint
.d32
= dwc_otg_read_host_all_channels_intr(dwc_otg_hcd
->core_if
);
434 for (i
= 0; i
< dwc_otg_hcd
->core_if
->core_params
->host_channels
; i
++) {
435 if (haint
.b2
.chint
& (1 << i
)) {
436 retval
|= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd
, i
);
443 /* Macro used to clear one channel interrupt */
444 #define clear_hc_int(_hc_regs_, _intr_) \
446 hcint_data_t hcint_clear = {.d32 = 0}; \
447 hcint_clear.b._intr_ = 1; \
448 dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \
452 * Macro used to disable one channel interrupt. Channel interrupts are
453 * disabled when the channel is halted or released by the interrupt handler.
454 * There is no need to handle further interrupts of that type until the
455 * channel is re-assigned. In fact, subsequent handling may cause crashes
456 * because the channel structures are cleaned up when the channel is released.
458 #define disable_hc_int(_hc_regs_, _intr_) \
460 hcintmsk_data_t hcintmsk = {.d32 = 0}; \
461 hcintmsk.b._intr_ = 1; \
462 dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
466 * Gets the actual length of a transfer after the transfer halts. _halt_status
467 * holds the reason for the halt.
469 * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
470 * *short_read is set to 1 upon return if less than the requested
471 * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
472 * return. short_read may also be NULL on entry, in which case it remains
475 static uint32_t get_actual_xfer_length(dwc_hc_t
*hc
,
476 dwc_otg_hc_regs_t
*hc_regs
,
478 dwc_otg_halt_status_e halt_status
,
481 hctsiz_data_t hctsiz
;
484 if (short_read
!= NULL
) {
487 hctsiz
.d32
= dwc_read_reg32(&hc_regs
->hctsiz
);
489 if (halt_status
== DWC_OTG_HC_XFER_COMPLETE
) {
491 length
= hc
->xfer_len
- hctsiz
.b
.xfersize
;
492 if (short_read
!= NULL
) {
493 *short_read
= (hctsiz
.b
.xfersize
!= 0);
495 } else if (hc
->qh
->do_split
) {
496 length
= qtd
->ssplit_out_xfer_count
;
498 length
= hc
->xfer_len
;
502 * Must use the hctsiz.pktcnt field to determine how much data
503 * has been transferred. This field reflects the number of
504 * packets that have been transferred via the USB. This is
505 * always an integral number of packets if the transfer was
506 * halted before its normal completion. (Can't use the
507 * hctsiz.xfersize field because that reflects the number of
508 * bytes transferred via the AHB, not the USB).
510 length
= (hc
->start_pkt_count
- hctsiz
.b
.pktcnt
) * hc
->max_packet
;
517 * Updates the state of the URB after a Transfer Complete interrupt on the
518 * host channel. Updates the actual_length field of the URB based on the
519 * number of bytes transferred via the host channel. Sets the URB status
520 * if the data transfer is finished.
522 * @return 1 if the data transfer specified by the URB is completely finished,
525 static int update_urb_state_xfer_comp(dwc_hc_t
*hc
,
526 dwc_otg_hc_regs_t
*hc_regs
,
533 urb
->actual_length
+= get_actual_xfer_length(hc
, hc_regs
, qtd
,
534 DWC_OTG_HC_XFER_COMPLETE
,
537 if (short_read
|| urb
->actual_length
>= urb
->transfer_buffer_length
) {
539 if (short_read
&& (urb
->transfer_flags
& URB_SHORT_NOT_OK
)) {
540 urb
->status
= -EREMOTEIO
;
548 hctsiz_data_t hctsiz
;
549 hctsiz
.d32
= dwc_read_reg32(&hc_regs
->hctsiz
);
550 DWC_DEBUGPL(DBG_HCDV
, "DWC_otg: %s: %s, channel %d\n",
551 __func__
, (hc
->ep_is_in
? "IN" : "OUT"), hc
->hc_num
);
552 DWC_DEBUGPL(DBG_HCDV
, " hc->xfer_len %d\n", hc
->xfer_len
);
553 DWC_DEBUGPL(DBG_HCDV
, " hctsiz.xfersize %d\n", hctsiz
.b
.xfersize
);
554 DWC_DEBUGPL(DBG_HCDV
, " urb %p\n", urb
);
555 DWC_DEBUGPL(DBG_HCDV
, " urb->transfer_buffer_length %d\n",
556 urb
->transfer_buffer_length
);
557 DWC_DEBUGPL(DBG_HCDV
, " urb->actual_length %d\n", urb
->actual_length
);
558 DWC_DEBUGPL(DBG_HCDV
, " short_read %d, xfer_done %d\n",
559 short_read
, xfer_done
);
567 * Save the starting data toggle for the next transfer. The data toggle is
568 * saved in the QH for non-control transfers and it's saved in the QTD for
571 static void save_data_toggle(dwc_hc_t
*hc
,
572 dwc_otg_hc_regs_t
*hc_regs
,
575 hctsiz_data_t hctsiz
;
576 hctsiz
.d32
= dwc_read_reg32(&hc_regs
->hctsiz
);
578 if (hc
->ep_type
!= DWC_OTG_EP_TYPE_CONTROL
) {
579 dwc_otg_qh_t
*qh
= hc
->qh
;
580 if (hctsiz
.b
.pid
== DWC_HCTSIZ_DATA0
) {
581 qh
->data_toggle
= DWC_OTG_HC_PID_DATA0
;
583 qh
->data_toggle
= DWC_OTG_HC_PID_DATA1
;
586 if (hctsiz
.b
.pid
== DWC_HCTSIZ_DATA0
) {
587 qtd
->data_toggle
= DWC_OTG_HC_PID_DATA0
;
589 qtd
->data_toggle
= DWC_OTG_HC_PID_DATA1
;
595 * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
596 * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
597 * still linked to the QH, the QH is added to the end of the inactive
598 * non-periodic schedule. For periodic QHs, removes the QH from the periodic
599 * schedule if no more QTDs are linked to the QH.
601 static void deactivate_qh(dwc_otg_hcd_t
*hcd
,
605 int continue_split
= 0;
609 DWC_DEBUGPL(DBG_HCDV
, " %s(%p,%p,%d)\n", __func__
, hcd
, qh
, free_qtd
);
611 SPIN_LOCK_IRQSAVE(&hcd
->lock
, flags
);
613 qtd
= list_entry(qh
->qtd_list
.next
, dwc_otg_qtd_t
, qtd_list_entry
);
615 if (qtd
->complete_split
) {
617 } else if (qtd
->isoc_split_pos
== DWC_HCSPLIT_XACTPOS_MID
||
618 qtd
->isoc_split_pos
== DWC_HCSPLIT_XACTPOS_END
) {
623 dwc_otg_hcd_qtd_remove_and_free(hcd
, qtd
);
628 qh
->qtd_in_process
= NULL
;
630 dwc_otg_hcd_qh_deactivate(hcd
, qh
, continue_split
);
631 SPIN_UNLOCK_IRQRESTORE(&hcd
->lock
, flags
);
635 * Updates the state of an Isochronous URB when the transfer is stopped for
636 * any reason. The fields of the current entry in the frame descriptor array
637 * are set based on the transfer state and the input _halt_status. Completes
638 * the Isochronous URB if all the URB frames have been completed.
640 * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
641 * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
643 static dwc_otg_halt_status_e
644 update_isoc_urb_state(dwc_otg_hcd_t
*hcd
,
646 dwc_otg_hc_regs_t
*hc_regs
,
648 dwc_otg_halt_status_e halt_status
)
650 struct urb
*urb
= qtd
->urb
;
651 dwc_otg_halt_status_e ret_val
= halt_status
;
652 struct usb_iso_packet_descriptor
*frame_desc
;
654 frame_desc
= &urb
->iso_frame_desc
[qtd
->isoc_frame_index
];
655 switch (halt_status
) {
656 case DWC_OTG_HC_XFER_COMPLETE
:
657 frame_desc
->status
= 0;
658 frame_desc
->actual_length
=
659 get_actual_xfer_length(hc
, hc_regs
, qtd
,
662 case DWC_OTG_HC_XFER_FRAME_OVERRUN
:
665 frame_desc
->status
= -ENOSR
;
667 frame_desc
->status
= -ECOMM
;
669 frame_desc
->actual_length
= 0;
671 case DWC_OTG_HC_XFER_BABBLE_ERR
:
673 frame_desc
->status
= -EOVERFLOW
;
674 /* Don't need to update actual_length in this case. */
676 case DWC_OTG_HC_XFER_XACT_ERR
:
678 frame_desc
->status
= -EPROTO
;
679 frame_desc
->actual_length
=
680 get_actual_xfer_length(hc
, hc_regs
, qtd
,
683 DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__
,
689 if (++qtd
->isoc_frame_index
== urb
->number_of_packets
) {
691 * urb->status is not used for isoc transfers.
692 * The individual frame_desc statuses are used instead.
694 dwc_otg_hcd_complete_urb(hcd
, urb
, 0);
695 ret_val
= DWC_OTG_HC_XFER_URB_COMPLETE
;
697 ret_val
= DWC_OTG_HC_XFER_COMPLETE
;
704 * Releases a host channel for use by other transfers. Attempts to select and
705 * queue more transactions since at least one host channel is available.
707 * @param hcd The HCD state structure.
708 * @param hc The host channel to release.
709 * @param qtd The QTD associated with the host channel. This QTD may be freed
710 * if the transfer is complete or an error has occurred.
711 * @param halt_status Reason the channel is being released. This status
712 * determines the actions taken by this function.
714 static void release_channel(dwc_otg_hcd_t
*hcd
,
717 dwc_otg_halt_status_e halt_status
)
719 dwc_otg_transaction_type_e tr_type
;
722 DWC_DEBUGPL(DBG_HCDV
, " %s: channel %d, halt_status %d\n",
723 __func__
, hc
->hc_num
, halt_status
);
725 switch (halt_status
) {
726 case DWC_OTG_HC_XFER_URB_COMPLETE
:
729 case DWC_OTG_HC_XFER_AHB_ERR
:
730 case DWC_OTG_HC_XFER_STALL
:
731 case DWC_OTG_HC_XFER_BABBLE_ERR
:
734 case DWC_OTG_HC_XFER_XACT_ERR
:
735 if (qtd
->error_count
>= 3) {
736 DWC_DEBUGPL(DBG_HCDV
, " Complete URB with transaction error\n");
738 qtd
->urb
->status
= -EPROTO
;
739 dwc_otg_hcd_complete_urb(hcd
, qtd
->urb
, -EPROTO
);
744 case DWC_OTG_HC_XFER_URB_DEQUEUE
:
746 * The QTD has already been removed and the QH has been
747 * deactivated. Don't want to do anything except release the
748 * host channel and try to queue more transfers.
751 case DWC_OTG_HC_XFER_NO_HALT_STATUS
:
752 DWC_ERROR("%s: No halt_status, channel %d\n", __func__
, hc
->hc_num
);
760 deactivate_qh(hcd
, hc
->qh
, free_qtd
);
764 * Release the host channel for use by other transfers. The cleanup
765 * function clears the channel interrupt enables and conditions, so
766 * there's no need to clear the Channel Halted interrupt separately.
768 dwc_otg_hc_cleanup(hcd
->core_if
, hc
);
769 list_add_tail(&hc
->hc_list_entry
, &hcd
->free_hc_list
);
771 if (!hc
->halt_on_queue
&& !hc
->halt_pending
&& hc
->qh
->nak_frame
!= 0xffff)
772 hcd
->nakking_channels
--;
774 switch (hc
->ep_type
) {
775 case DWC_OTG_EP_TYPE_CONTROL
:
776 case DWC_OTG_EP_TYPE_BULK
:
777 hcd
->non_periodic_channels
--;
779 /* This condition has once been observed, but the cause
780 * was never determined. Check for it here, to collect
781 * debug data if it occurs again. */
782 WARN_ON_ONCE(hcd
->non_periodic_channels
< 0);
787 * Don't release reservations for periodic channels here.
788 * That's done when a periodic transfer is descheduled (i.e.
789 * when the QH is removed from the periodic schedule).
794 if (halt_status
!= DWC_OTG_HC_XFER_NAK
)
795 hc
->qh
->nak_frame
= 0xffff;
797 /* Try to queue more transfers now that there's a free channel. */
798 tr_type
= dwc_otg_hcd_select_transactions(hcd
);
799 if (tr_type
!= DWC_OTG_TRANSACTION_NONE
) {
800 dwc_otg_hcd_queue_transactions(hcd
, tr_type
);
805 * Halts a host channel. If the channel cannot be halted immediately because
806 * the request queue is full, this function ensures that the FIFO empty
807 * interrupt for the appropriate queue is enabled so that the halt request can
808 * be queued when there is space in the request queue.
810 * This function may also be called in DMA mode. In that case, the channel is
811 * simply released since the core always halts the channel automatically in
814 static void halt_channel(dwc_otg_hcd_t
*hcd
,
817 dwc_otg_halt_status_e halt_status
)
819 if (hcd
->core_if
->dma_enable
) {
820 release_channel(hcd
, hc
, qtd
, halt_status
);
824 /* Slave mode processing... */
825 dwc_otg_hc_halt(hcd
, hc
, halt_status
);
827 if (hc
->halt_on_queue
) {
828 gintmsk_data_t gintmsk
= {.d32
= 0};
829 dwc_otg_core_global_regs_t
*global_regs
;
830 global_regs
= hcd
->core_if
->core_global_regs
;
832 if (hc
->ep_type
== DWC_OTG_EP_TYPE_CONTROL
||
833 hc
->ep_type
== DWC_OTG_EP_TYPE_BULK
) {
835 * Make sure the Non-periodic Tx FIFO empty interrupt
836 * is enabled so that the non-periodic schedule will
839 gintmsk
.b
.nptxfempty
= 1;
840 dwc_modify_reg32(&global_regs
->gintmsk
, 0, gintmsk
.d32
);
843 * Move the QH from the periodic queued schedule to
844 * the periodic assigned schedule. This allows the
845 * halt to be queued when the periodic schedule is
848 list_move(&hc
->qh
->qh_list_entry
,
849 &hcd
->periodic_sched_assigned
);
852 * Make sure the Periodic Tx FIFO Empty interrupt is
853 * enabled so that the periodic schedule will be
856 gintmsk
.b
.ptxfempty
= 1;
857 dwc_modify_reg32(&global_regs
->gintmsk
, 0, gintmsk
.d32
);
863 * Performs common cleanup for non-periodic transfers after a Transfer
864 * Complete interrupt. This function should be called after any endpoint type
865 * specific handling is finished to release the host channel.
867 static void complete_non_periodic_xfer(dwc_otg_hcd_t
*hcd
,
869 dwc_otg_hc_regs_t
*hc_regs
,
871 dwc_otg_halt_status_e halt_status
)
875 qtd
->error_count
= 0;
877 hcint
.d32
= dwc_read_reg32(&hc_regs
->hcint
);
880 * Got a NYET on the last transaction of the transfer. This
881 * means that the endpoint should be in the PING state at the
882 * beginning of the next transfer.
884 hc
->qh
->ping_state
= 1;
885 clear_hc_int(hc_regs
, nyet
);
889 * Always halt and release the host channel to make it available for
890 * more transfers. There may still be more phases for a control
891 * transfer or more data packets for a bulk transfer at this point,
892 * but the host channel is still halted. A channel will be reassigned
893 * to the transfer when the non-periodic schedule is processed after
894 * the channel is released. This allows transactions to be queued
895 * properly via dwc_otg_hcd_queue_transactions, which also enables the
896 * Tx FIFO Empty interrupt if necessary.
900 * IN transfers in Slave mode require an explicit disable to
901 * halt the channel. (In DMA mode, this call simply releases
904 halt_channel(hcd
, hc
, qtd
, halt_status
);
907 * The channel is automatically disabled by the core for OUT
908 * transfers in Slave mode.
910 release_channel(hcd
, hc
, qtd
, halt_status
);
915 * Performs common cleanup for periodic transfers after a Transfer Complete
916 * interrupt. This function should be called after any endpoint type specific
917 * handling is finished to release the host channel.
919 static void complete_periodic_xfer(dwc_otg_hcd_t
*hcd
,
921 dwc_otg_hc_regs_t
*hc_regs
,
923 dwc_otg_halt_status_e halt_status
)
925 hctsiz_data_t hctsiz
;
926 qtd
->error_count
= 0;
928 hctsiz
.d32
= dwc_read_reg32(&hc_regs
->hctsiz
);
929 if (!hc
->ep_is_in
|| hctsiz
.b
.pktcnt
== 0) {
930 /* Core halts channel in these cases. */
931 release_channel(hcd
, hc
, qtd
, halt_status
);
933 /* Flush any outstanding requests from the Tx queue. */
934 halt_channel(hcd
, hc
, qtd
, halt_status
);
939 * Handles a host channel Transfer Complete interrupt. This handler may be
940 * called in either DMA mode or Slave mode.
942 static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t
*hcd
,
944 dwc_otg_hc_regs_t
*hc_regs
,
948 dwc_otg_halt_status_e halt_status
= DWC_OTG_HC_XFER_COMPLETE
;
949 struct urb
*urb
= qtd
->urb
;
950 int pipe_type
= usb_pipetype(urb
->pipe
);
952 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
953 "Transfer Complete--\n", hc
->hc_num
);
956 * Handle xfer complete on CSPLIT.
958 if (hc
->qh
->do_split
) {
959 qtd
->complete_split
= 0;
962 /* Update the QTD and URB states. */
965 switch (qtd
->control_phase
) {
966 case DWC_OTG_CONTROL_SETUP
:
967 if (urb
->transfer_buffer_length
> 0) {
968 qtd
->control_phase
= DWC_OTG_CONTROL_DATA
;
970 qtd
->control_phase
= DWC_OTG_CONTROL_STATUS
;
972 DWC_DEBUGPL(DBG_HCDV
, " Control setup transaction done\n");
973 halt_status
= DWC_OTG_HC_XFER_COMPLETE
;
975 case DWC_OTG_CONTROL_DATA
: {
976 urb_xfer_done
= update_urb_state_xfer_comp(hc
, hc_regs
, urb
, qtd
);
978 qtd
->control_phase
= DWC_OTG_CONTROL_STATUS
;
979 DWC_DEBUGPL(DBG_HCDV
, " Control data transfer done\n");
981 save_data_toggle(hc
, hc_regs
, qtd
);
983 halt_status
= DWC_OTG_HC_XFER_COMPLETE
;
986 case DWC_OTG_CONTROL_STATUS
:
987 DWC_DEBUGPL(DBG_HCDV
, " Control transfer complete\n");
988 if (urb
->status
== -EINPROGRESS
) {
991 dwc_otg_hcd_complete_urb(hcd
, urb
, urb
->status
);
992 halt_status
= DWC_OTG_HC_XFER_URB_COMPLETE
;
996 complete_non_periodic_xfer(hcd
, hc
, hc_regs
, qtd
, halt_status
);
999 DWC_DEBUGPL(DBG_HCDV
, " Bulk transfer complete\n");
1000 urb_xfer_done
= update_urb_state_xfer_comp(hc
, hc_regs
, urb
, qtd
);
1001 if (urb_xfer_done
) {
1002 dwc_otg_hcd_complete_urb(hcd
, urb
, urb
->status
);
1003 halt_status
= DWC_OTG_HC_XFER_URB_COMPLETE
;
1005 halt_status
= DWC_OTG_HC_XFER_COMPLETE
;
1008 save_data_toggle(hc
, hc_regs
, qtd
);
1009 complete_non_periodic_xfer(hcd
, hc
, hc_regs
, qtd
, halt_status
);
1011 case PIPE_INTERRUPT
:
1012 DWC_DEBUGPL(DBG_HCDV
, " Interrupt transfer complete\n");
1013 update_urb_state_xfer_comp(hc
, hc_regs
, urb
, qtd
);
1016 * Interrupt URB is done on the first transfer complete
1019 dwc_otg_hcd_complete_urb(hcd
, urb
, urb
->status
);
1020 save_data_toggle(hc
, hc_regs
, qtd
);
1021 complete_periodic_xfer(hcd
, hc
, hc_regs
, qtd
,
1022 DWC_OTG_HC_XFER_URB_COMPLETE
);
1024 case PIPE_ISOCHRONOUS
:
1025 DWC_DEBUGPL(DBG_HCDV
, " Isochronous transfer complete\n");
1026 if (qtd
->isoc_split_pos
== DWC_HCSPLIT_XACTPOS_ALL
) {
1027 halt_status
= update_isoc_urb_state(hcd
, hc
, hc_regs
, qtd
,
1028 DWC_OTG_HC_XFER_COMPLETE
);
1030 complete_periodic_xfer(hcd
, hc
, hc_regs
, qtd
, halt_status
);
1034 disable_hc_int(hc_regs
, xfercompl
);
1040 * Handles a host channel STALL interrupt. This handler may be called in
1041 * either DMA mode or Slave mode.
1043 static int32_t handle_hc_stall_intr(dwc_otg_hcd_t
*hcd
,
1045 dwc_otg_hc_regs_t
*hc_regs
,
1048 struct urb
*urb
= qtd
->urb
;
1049 int pipe_type
= usb_pipetype(urb
->pipe
);
1051 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1052 "STALL Received--\n", hc
->hc_num
);
1054 if (pipe_type
== PIPE_CONTROL
) {
1055 dwc_otg_hcd_complete_urb(hcd
, urb
, -EPIPE
);
1058 if (pipe_type
== PIPE_BULK
|| pipe_type
== PIPE_INTERRUPT
) {
1059 dwc_otg_hcd_complete_urb(hcd
, urb
, -EPIPE
);
1061 * USB protocol requires resetting the data toggle for bulk
1062 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
1063 * setup command is issued to the endpoint. Anticipate the
1064 * CLEAR_FEATURE command since a STALL has occurred and reset
1065 * the data toggle now.
1067 hc
->qh
->data_toggle
= 0;
1070 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_STALL
);
1072 disable_hc_int(hc_regs
, stall
);
1078 * Updates the state of the URB when a transfer has been stopped due to an
1079 * abnormal condition before the transfer completes. Modifies the
1080 * actual_length field of the URB to reflect the number of bytes that have
1081 * actually been transferred via the host channel.
1083 static void update_urb_state_xfer_intr(dwc_hc_t
*hc
,
1084 dwc_otg_hc_regs_t
*hc_regs
,
1087 dwc_otg_halt_status_e halt_status
)
1089 uint32_t bytes_transferred
= get_actual_xfer_length(hc
, hc_regs
, qtd
,
1091 urb
->actual_length
+= bytes_transferred
;
1095 hctsiz_data_t hctsiz
;
1096 hctsiz
.d32
= dwc_read_reg32(&hc_regs
->hctsiz
);
1097 DWC_DEBUGPL(DBG_HCDV
, "DWC_otg: %s: %s, channel %d\n",
1098 __func__
, (hc
->ep_is_in
? "IN" : "OUT"), hc
->hc_num
);
1099 DWC_DEBUGPL(DBG_HCDV
, " hc->start_pkt_count %d\n", hc
->start_pkt_count
);
1100 DWC_DEBUGPL(DBG_HCDV
, " hctsiz.pktcnt %d\n", hctsiz
.b
.pktcnt
);
1101 DWC_DEBUGPL(DBG_HCDV
, " hc->max_packet %d\n", hc
->max_packet
);
1102 DWC_DEBUGPL(DBG_HCDV
, " bytes_transferred %d\n", bytes_transferred
);
1103 DWC_DEBUGPL(DBG_HCDV
, " urb %p\n", urb
);
1104 DWC_DEBUGPL(DBG_HCDV
, " urb->actual_length %d\n", urb
->actual_length
);
1105 DWC_DEBUGPL(DBG_HCDV
, " urb->transfer_buffer_length %d\n",
1106 urb
->transfer_buffer_length
);
1112 * Handles a host channel NAK interrupt. This handler may be called in either
1113 * DMA mode or Slave mode.
1115 static int32_t handle_hc_nak_intr(dwc_otg_hcd_t
*hcd
,
1117 dwc_otg_hc_regs_t
*hc_regs
,
1120 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1121 "NAK Received--\n", hc
->hc_num
);
1123 * When we get bulk NAKs then remember this so we holdoff on this qh until
1124 * the beginning of the next frame
1126 switch (usb_pipetype(qtd
->urb
->pipe
)) {
1128 /* xfer_started can be 0 when a halted interrupt
1129 * occurs with the nak flag set, then first the
1130 * halted handler runs and then this nak
1131 * handler. In this case, also don't update
1132 * nak_frame, since the qh might already be
1133 * assigned to another host channel. */
1134 if (!hc
->halt_on_queue
&& !hc
->halt_pending
&& hc
->xfer_started
&& hc
->qh
->nak_frame
== 0xffff)
1135 hcd
->nakking_channels
++;
1136 if (hc
->xfer_started
)
1137 hc
->qh
->nak_frame
= dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd
));
1141 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
1142 * interrupt. Re-start the SSPLIT transfer.
1145 if (hc
->complete_split
) {
1146 qtd
->error_count
= 0;
1148 qtd
->complete_split
= 0;
1149 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_NAK
);
1150 goto handle_nak_done
;
1153 switch (usb_pipetype(qtd
->urb
->pipe
)) {
1156 if (hcd
->core_if
->dma_enable
&& hc
->ep_is_in
) {
1158 * NAK interrupts are enabled on bulk/control IN
1159 * transfers in DMA mode for the sole purpose of
1160 * resetting the error count after a transaction error
1161 * occurs. The core will continue transferring data.
1163 qtd
->error_count
= 0;
1164 goto handle_nak_done
;
1168 * NAK interrupts normally occur during OUT transfers in DMA
1169 * or Slave mode. For IN transfers, more requests will be
1170 * queued as request queue space is available.
1172 qtd
->error_count
= 0;
1174 if (!hc
->qh
->ping_state
) {
1175 update_urb_state_xfer_intr(hc
, hc_regs
, qtd
->urb
,
1176 qtd
, DWC_OTG_HC_XFER_NAK
);
1177 save_data_toggle(hc
, hc_regs
, qtd
);
1178 if (qtd
->urb
->dev
->speed
== USB_SPEED_HIGH
) {
1179 hc
->qh
->ping_state
= 1;
1184 * Halt the channel so the transfer can be re-started from
1185 * the appropriate point or the PING protocol will
1188 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_NAK
);
1190 case PIPE_INTERRUPT
:
1191 qtd
->error_count
= 0;
1192 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_NAK
);
1194 case PIPE_ISOCHRONOUS
:
1195 /* Should never get called for isochronous transfers. */
1201 disable_hc_int(hc_regs
, nak
);
1207 * Handles a host channel ACK interrupt. This interrupt is enabled when
1208 * performing the PING protocol in Slave mode, when errors occur during
1209 * either Slave mode or DMA mode, and during Start Split transactions.
1211 static int32_t handle_hc_ack_intr(dwc_otg_hcd_t
*hcd
,
1213 dwc_otg_hc_regs_t
*hc_regs
,
1216 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1217 "ACK Received--\n", hc
->hc_num
);
1221 * Handle ACK on SSPLIT.
1222 * ACK should not occur in CSPLIT.
1224 if (!hc
->ep_is_in
&& hc
->data_pid_start
!= DWC_OTG_HC_PID_SETUP
) {
1225 qtd
->ssplit_out_xfer_count
= hc
->xfer_len
;
1227 if (!(hc
->ep_type
== DWC_OTG_EP_TYPE_ISOC
&& !hc
->ep_is_in
)) {
1228 /* Don't need complete for isochronous out transfers. */
1229 qtd
->complete_split
= 1;
1233 if (hc
->ep_type
== DWC_OTG_EP_TYPE_ISOC
&& !hc
->ep_is_in
) {
1234 switch (hc
->xact_pos
) {
1235 case DWC_HCSPLIT_XACTPOS_ALL
:
1237 case DWC_HCSPLIT_XACTPOS_END
:
1238 qtd
->isoc_split_pos
= DWC_HCSPLIT_XACTPOS_ALL
;
1239 qtd
->isoc_split_offset
= 0;
1241 case DWC_HCSPLIT_XACTPOS_BEGIN
:
1242 case DWC_HCSPLIT_XACTPOS_MID
:
1244 * For BEGIN or MID, calculate the length for
1245 * the next microframe to determine the correct
1246 * SSPLIT token, either MID or END.
1249 struct usb_iso_packet_descriptor
*frame_desc
;
1251 frame_desc
= &qtd
->urb
->iso_frame_desc
[qtd
->isoc_frame_index
];
1252 qtd
->isoc_split_offset
+= 188;
1254 if ((frame_desc
->length
- qtd
->isoc_split_offset
) <= 188) {
1255 qtd
->isoc_split_pos
= DWC_HCSPLIT_XACTPOS_END
;
1257 qtd
->isoc_split_pos
= DWC_HCSPLIT_XACTPOS_MID
;
1264 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_ACK
);
1267 qtd
->error_count
= 0;
1269 if (hc
->qh
->ping_state
) {
1270 hc
->qh
->ping_state
= 0;
1272 * Halt the channel so the transfer can be re-started
1273 * from the appropriate point. This only happens in
1274 * Slave mode. In DMA mode, the ping_state is cleared
1275 * when the transfer is started because the core
1276 * automatically executes the PING, then the transfer.
1278 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_ACK
);
1283 * If the ACK occurred when _not_ in the PING state, let the channel
1284 * continue transferring data after clearing the error count.
1287 disable_hc_int(hc_regs
, ack
);
1293 * Handles a host channel NYET interrupt. This interrupt should only occur on
1294 * Bulk and Control OUT endpoints and for complete split transactions. If a
1295 * NYET occurs at the same time as a Transfer Complete interrupt, it is
1296 * handled in the xfercomp interrupt handler, not here. This handler may be
1297 * called in either DMA mode or Slave mode.
1299 static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t
*hcd
,
1301 dwc_otg_hc_regs_t
*hc_regs
,
1304 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1305 "NYET Received--\n", hc
->hc_num
);
1309 * re-do the CSPLIT immediately on non-periodic
1311 if (hc
->do_split
&& hc
->complete_split
) {
1312 if (hc
->ep_type
== DWC_OTG_EP_TYPE_INTR
||
1313 hc
->ep_type
== DWC_OTG_EP_TYPE_ISOC
) {
1314 int frnum
= dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd
));
1316 if (dwc_full_frame_num(frnum
) !=
1317 dwc_full_frame_num(hc
->qh
->sched_frame
)) {
1319 * No longer in the same full speed frame.
1320 * Treat this as a transaction error.
1323 /** @todo Fix system performance so this can
1324 * be treated as an error. Right now complete
1325 * splits cannot be scheduled precisely enough
1326 * due to other system activity, so this error
1327 * occurs regularly in Slave mode.
1331 qtd
->complete_split
= 0;
1332 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_XACT_ERR
);
1333 /** @todo add support for isoc release */
1334 goto handle_nyet_done
;
1338 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_NYET
);
1339 goto handle_nyet_done
;
1342 hc
->qh
->ping_state
= 1;
1343 qtd
->error_count
= 0;
1345 update_urb_state_xfer_intr(hc
, hc_regs
, qtd
->urb
, qtd
,
1346 DWC_OTG_HC_XFER_NYET
);
1347 save_data_toggle(hc
, hc_regs
, qtd
);
1350 * Halt the channel and re-start the transfer so the PING
1351 * protocol will start.
1353 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_NYET
);
1356 disable_hc_int(hc_regs
, nyet
);
1361 * Handles a host channel babble interrupt. This handler may be called in
1362 * either DMA mode or Slave mode.
1364 static int32_t handle_hc_babble_intr(dwc_otg_hcd_t
*hcd
,
1366 dwc_otg_hc_regs_t
*hc_regs
,
1369 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1370 "Babble Error--\n", hc
->hc_num
);
1371 if (hc
->ep_type
!= DWC_OTG_EP_TYPE_ISOC
) {
1372 dwc_otg_hcd_complete_urb(hcd
, qtd
->urb
, -EOVERFLOW
);
1373 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_BABBLE_ERR
);
1375 dwc_otg_halt_status_e halt_status
;
1376 halt_status
= update_isoc_urb_state(hcd
, hc
, hc_regs
, qtd
,
1377 DWC_OTG_HC_XFER_BABBLE_ERR
);
1378 halt_channel(hcd
, hc
, qtd
, halt_status
);
1380 disable_hc_int(hc_regs
, bblerr
);
1385 * Handles a host channel AHB error interrupt. This handler is only called in
1388 static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t
*hcd
,
1390 dwc_otg_hc_regs_t
*hc_regs
,
1393 hcchar_data_t hcchar
;
1394 hcsplt_data_t hcsplt
;
1395 hctsiz_data_t hctsiz
;
1397 struct urb
*urb
= qtd
->urb
;
1399 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1400 "AHB Error--\n", hc
->hc_num
);
1402 hcchar
.d32
= dwc_read_reg32(&hc_regs
->hcchar
);
1403 hcsplt
.d32
= dwc_read_reg32(&hc_regs
->hcsplt
);
1404 hctsiz
.d32
= dwc_read_reg32(&hc_regs
->hctsiz
);
1405 hcdma
= dwc_read_reg32(&hc_regs
->hcdma
);
1407 DWC_ERROR("AHB ERROR, Channel %d\n", hc
->hc_num
);
1408 DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar
.d32
, hcsplt
.d32
);
1409 DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz
.d32
, hcdma
);
1410 DWC_DEBUGPL(DBG_HCD
, "DWC OTG HCD URB Enqueue\n");
1411 DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb
->pipe
));
1412 DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb
->pipe
),
1413 (usb_pipein(urb
->pipe
) ? "IN" : "OUT"));
1414 DWC_ERROR(" Endpoint type: %s\n",
1416 switch (usb_pipetype(urb
->pipe
)) {
1417 case PIPE_CONTROL
: pipetype
= "CONTROL"; break;
1418 case PIPE_BULK
: pipetype
= "BULK"; break;
1419 case PIPE_INTERRUPT
: pipetype
= "INTERRUPT"; break;
1420 case PIPE_ISOCHRONOUS
: pipetype
= "ISOCHRONOUS"; break;
1421 default: pipetype
= "UNKNOWN"; break;
1423 DWC_ERROR(" Speed: %s\n",
1425 switch (urb
->dev
->speed
) {
1426 case USB_SPEED_HIGH
: speed
= "HIGH"; break;
1427 case USB_SPEED_FULL
: speed
= "FULL"; break;
1428 case USB_SPEED_LOW
: speed
= "LOW"; break;
1429 default: speed
= "UNKNOWN"; break;
1431 DWC_ERROR(" Max packet size: %d\n",
1432 usb_maxpacket(urb
->dev
, urb
->pipe
, usb_pipeout(urb
->pipe
)));
1433 DWC_ERROR(" Data buffer length: %d\n", urb
->transfer_buffer_length
);
1434 DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
1435 urb
->transfer_buffer
, (void *)urb
->transfer_dma
);
1436 DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
1437 urb
->setup_packet
, (void *)urb
->setup_dma
);
1438 DWC_ERROR(" Interval: %d\n", urb
->interval
);
1440 dwc_otg_hcd_complete_urb(hcd
, urb
, -EIO
);
1443 * Force a channel halt. Don't call halt_channel because that won't
1444 * write to the HCCHARn register in DMA mode to force the halt.
1446 dwc_otg_hc_halt(hcd
, hc
, DWC_OTG_HC_XFER_AHB_ERR
);
1448 disable_hc_int(hc_regs
, ahberr
);
1453 * Handles a host channel transaction error interrupt. This handler may be
1454 * called in either DMA mode or Slave mode.
1456 static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t
*hcd
,
1458 dwc_otg_hc_regs_t
*hc_regs
,
1461 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1462 "Transaction Error--\n", hc
->hc_num
);
1464 switch (usb_pipetype(qtd
->urb
->pipe
)) {
1468 if (!hc
->qh
->ping_state
) {
1469 update_urb_state_xfer_intr(hc
, hc_regs
, qtd
->urb
,
1470 qtd
, DWC_OTG_HC_XFER_XACT_ERR
);
1471 save_data_toggle(hc
, hc_regs
, qtd
);
1472 if (!hc
->ep_is_in
&& qtd
->urb
->dev
->speed
== USB_SPEED_HIGH
) {
1473 hc
->qh
->ping_state
= 1;
1478 * Halt the channel so the transfer can be re-started from
1479 * the appropriate point or the PING protocol will start.
1481 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_XACT_ERR
);
1483 case PIPE_INTERRUPT
:
1485 if (hc
->do_split
&& hc
->complete_split
) {
1486 qtd
->complete_split
= 0;
1488 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_XACT_ERR
);
1490 case PIPE_ISOCHRONOUS
:
1492 dwc_otg_halt_status_e halt_status
;
1493 halt_status
= update_isoc_urb_state(hcd
, hc
, hc_regs
, qtd
,
1494 DWC_OTG_HC_XFER_XACT_ERR
);
1496 halt_channel(hcd
, hc
, qtd
, halt_status
);
1501 disable_hc_int(hc_regs
, xacterr
);
1507 * Handles a host channel frame overrun interrupt. This handler may be called
1508 * in either DMA mode or Slave mode.
1510 static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t
*hcd
,
1512 dwc_otg_hc_regs_t
*hc_regs
,
1515 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1516 "Frame Overrun--\n", hc
->hc_num
);
1518 switch (usb_pipetype(qtd
->urb
->pipe
)) {
1522 case PIPE_INTERRUPT
:
1523 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_FRAME_OVERRUN
);
1525 case PIPE_ISOCHRONOUS
:
1527 dwc_otg_halt_status_e halt_status
;
1528 halt_status
= update_isoc_urb_state(hcd
, hc
, hc_regs
, qtd
,
1529 DWC_OTG_HC_XFER_FRAME_OVERRUN
);
1531 halt_channel(hcd
, hc
, qtd
, halt_status
);
1536 disable_hc_int(hc_regs
, frmovrun
);
1542 * Handles a host channel data toggle error interrupt. This handler may be
1543 * called in either DMA mode or Slave mode.
1545 static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t
*hcd
,
1547 dwc_otg_hc_regs_t
*hc_regs
,
1550 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1551 "Data Toggle Error on %s transfer--\n",
1552 hc
->hc_num
, (hc
->ep_is_in
? "IN" : "OUT"));
1554 /* Data toggles on split transactions cause the hc to halt.
1555 * restart transfer */
1556 if (hc
->qh
->do_split
) {
1558 save_data_toggle(hc
, hc_regs
, qtd
);
1559 update_urb_state_xfer_intr(hc
, hc_regs
,
1560 qtd
->urb
, qtd
, DWC_OTG_HC_XFER_XACT_ERR
);
1561 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_XACT_ERR
);
1562 } else if (hc
->ep_is_in
) {
1563 /* An unmasked data toggle error on a non-split DMA transaction
1565 * for the sole purpose of resetting error counts. Disable other
1566 * interrupts unmasked for the same reason.
1568 if (hcd
->core_if
->dma_enable
) {
1569 disable_hc_int(hc_regs
, ack
);
1570 disable_hc_int(hc_regs
, nak
);
1572 qtd
->error_count
= 0;
1575 disable_hc_int(hc_regs
, datatglerr
);
1582 * This function is for debug only. It checks that a valid halt status is set
1583 * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
1584 * taken and a warning is issued.
1585 * @return 1 if halt status is ok, 0 otherwise.
1587 static inline int halt_status_ok(dwc_otg_hcd_t
*hcd
,
1589 dwc_otg_hc_regs_t
*hc_regs
,
1592 hcchar_data_t hcchar
;
1593 hctsiz_data_t hctsiz
;
1595 hcintmsk_data_t hcintmsk
;
1596 hcsplt_data_t hcsplt
;
1598 if (hc
->halt_status
== DWC_OTG_HC_XFER_NO_HALT_STATUS
) {
1600 * This code is here only as a check. This condition should
1601 * never happen. Ignore the halt if it does occur.
1603 hcchar
.d32
= dwc_read_reg32(&hc_regs
->hcchar
);
1604 hctsiz
.d32
= dwc_read_reg32(&hc_regs
->hctsiz
);
1605 hcint
.d32
= dwc_read_reg32(&hc_regs
->hcint
);
1606 hcintmsk
.d32
= dwc_read_reg32(&hc_regs
->hcintmsk
);
1607 hcsplt
.d32
= dwc_read_reg32(&hc_regs
->hcsplt
);
1608 DWC_WARN("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
1609 "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
1610 "hcint 0x%08x, hcintmsk 0x%08x, "
1611 "hcsplt 0x%08x, qtd->complete_split %d\n",
1612 __func__
, hc
->hc_num
, hcchar
.d32
, hctsiz
.d32
,
1613 hcint
.d32
, hcintmsk
.d32
,
1614 hcsplt
.d32
, qtd
->complete_split
);
1616 DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
1617 __func__
, hc
->hc_num
);
1619 clear_hc_int(hc_regs
, chhltd
);
1624 * This code is here only as a check. hcchar.chdis should
1625 * never be set when the halt interrupt occurs. Halt the
1626 * channel again if it does occur.
1628 hcchar
.d32
= dwc_read_reg32(&hc_regs
->hcchar
);
1629 if (hcchar
.b
.chdis
) {
1630 DWC_WARN("%s: hcchar.chdis set unexpectedly, "
1631 "hcchar 0x%08x, trying to halt again\n",
1632 __func__
, hcchar
.d32
);
1633 clear_hc_int(hc_regs
, chhltd
);
1634 if (hc
->halt_pending
&& !hc
->halt_on_queue
&& hc
->qh
->nak_frame
!= 0xffff)
1635 hcd
->nakking_channels
++;
1636 hc
->halt_pending
= 0;
1637 halt_channel(hcd
, hc
, qtd
, hc
->halt_status
);
1646 * Handles a host Channel Halted interrupt in DMA mode. This handler
1647 * determines the reason the channel halted and proceeds accordingly.
1649 static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t
*hcd
,
1651 dwc_otg_hc_regs_t
*hc_regs
,
1655 hcintmsk_data_t hcintmsk
;
1656 int out_nak_enh
= 0;
1658 /* For core with OUT NAK enhancement, the flow for high-
1659 * speed CONTROL/BULK OUT is handled a little differently.
1661 if (hcd
->core_if
->snpsid
>= 0x4F54271A) {
1662 if (hc
->speed
== DWC_OTG_EP_SPEED_HIGH
&& !hc
->ep_is_in
&&
1663 (hc
->ep_type
== DWC_OTG_EP_TYPE_CONTROL
||
1664 hc
->ep_type
== DWC_OTG_EP_TYPE_BULK
)) {
1665 DWC_DEBUGPL(DBG_HCD_FLOOD
, "OUT NAK enhancement enabled\n");
1668 DWC_DEBUGPL(DBG_HCD_FLOOD
, "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n");
1671 DWC_DEBUGPL(DBG_HCD_FLOOD
, "OUT NAK enhancement disabled, no core support\n");
1674 if (hc
->halt_status
== DWC_OTG_HC_XFER_NAK
) {
1675 /* The channel was nakking and halted to free up the
1676 * channel for another transfer. If this channel has
1677 * already received data, we need to skip that amount on
1680 update_urb_state_xfer_intr(hc
, hc_regs
, qtd
->urb
,
1681 qtd
, DWC_OTG_HC_XFER_NAK
);
1683 save_data_toggle(hc
, hc_regs
, qtd
);
1685 /* It turns out that sometimes a channel is halted just
1686 * as it receives its last packet. This causes the
1687 * to trigger a channel halted interrupt without a
1688 * transfer complete flag, even though the transfer is
1689 * actually complete. If we don't handle that here, the
1690 * qtd will be resubmitted and since bulk in can't have
1691 * empty packets, this will cause one full packet of
1692 * "extra" data to be transfered. So we check here to
1693 * see if the transfer is complete and handle that
1696 if (usb_pipebulk(qtd
->urb
->pipe
) &&
1697 usb_pipein(qtd
->urb
->pipe
) &&
1698 qtd
->urb
->actual_length
== qtd
->urb
->transfer_buffer_length
) {
1699 dwc_otg_hcd_complete_urb(hcd
, qtd
->urb
, 0);
1700 complete_non_periodic_xfer(hcd
, hc
, hc_regs
, qtd
, DWC_OTG_HC_XFER_URB_COMPLETE
);
1702 release_channel(hcd
, hc
, qtd
, hc
->halt_status
);
1707 if (hc
->halt_status
== DWC_OTG_HC_XFER_URB_DEQUEUE
||
1708 hc
->halt_status
== DWC_OTG_HC_XFER_AHB_ERR
) {
1710 * Just release the channel. A dequeue can happen on a
1711 * transfer timeout. In the case of an AHB Error, the channel
1712 * was forced to halt because there's no way to gracefully
1715 release_channel(hcd
, hc
, qtd
, hc
->halt_status
);
1719 /* Read the HCINTn register to determine the cause for the halt. */
1720 hcint
.d32
= dwc_read_reg32(&hc_regs
->hcint
);
1721 hcintmsk
.d32
= dwc_read_reg32(&hc_regs
->hcintmsk
);
1723 if (hcint
.b
.xfercomp
) {
1724 /** @todo This is here because of a possible hardware bug. Spec
1725 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
1726 * interrupt w/ACK bit set should occur, but I only see the
1727 * XFERCOMP bit, even with it masked out. This is a workaround
1728 * for that behavior. Should fix this when hardware is fixed.
1730 if (hc
->ep_type
== DWC_OTG_EP_TYPE_ISOC
&& !hc
->ep_is_in
) {
1731 handle_hc_ack_intr(hcd
, hc
, hc_regs
, qtd
);
1733 handle_hc_xfercomp_intr(hcd
, hc
, hc_regs
, qtd
);
1734 } else if (hcint
.b
.stall
) {
1735 handle_hc_stall_intr(hcd
, hc
, hc_regs
, qtd
);
1736 } else if (hcint
.b
.xacterr
) {
1738 if (hcint
.b
.nyet
|| hcint
.b
.nak
|| hcint
.b
.ack
) {
1739 printk(KERN_DEBUG
"XactErr with NYET/NAK/ACK\n");
1740 qtd
->error_count
= 0;
1742 printk(KERN_DEBUG
"XactErr without NYET/NAK/ACK\n");
1747 * Must handle xacterr before nak or ack. Could get a xacterr
1748 * at the same time as either of these on a BULK/CONTROL OUT
1749 * that started with a PING. The xacterr takes precedence.
1751 handle_hc_xacterr_intr(hcd
, hc
, hc_regs
, qtd
);
1752 } else if (hcint
.b
.datatglerr
) {
1753 handle_hc_datatglerr_intr(hcd
, hc
, hc_regs
, qtd
);
1754 } else if (!out_nak_enh
) {
1757 * Must handle nyet before nak or ack. Could get a nyet at the
1758 * same time as either of those on a BULK/CONTROL OUT that
1759 * started with a PING. The nyet takes precedence.
1761 handle_hc_nyet_intr(hcd
, hc
, hc_regs
, qtd
);
1762 } else if (hcint
.b
.bblerr
) {
1763 handle_hc_babble_intr(hcd
, hc
, hc_regs
, qtd
);
1764 } else if (hcint
.b
.frmovrun
) {
1765 handle_hc_frmovrun_intr(hcd
, hc
, hc_regs
, qtd
);
1766 } else if (hcint
.b
.nak
&& !hcintmsk
.b
.nak
) {
1768 * If nak is not masked, it's because a non-split IN transfer
1769 * is in an error state. In that case, the nak is handled by
1770 * the nak interrupt handler, not here. Handle nak here for
1771 * BULK/CONTROL OUT transfers, which halt on a NAK to allow
1772 * rewinding the buffer pointer.
1774 handle_hc_nak_intr(hcd
, hc
, hc_regs
, qtd
);
1775 } else if (hcint
.b
.ack
&& !hcintmsk
.b
.ack
) {
1777 * If ack is not masked, it's because a non-split IN transfer
1778 * is in an error state. In that case, the ack is handled by
1779 * the ack interrupt handler, not here. Handle ack here for
1780 * split transfers. Start splits halt on ACK.
1782 handle_hc_ack_intr(hcd
, hc
, hc_regs
, qtd
);
1784 if (hc
->ep_type
== DWC_OTG_EP_TYPE_INTR
||
1785 hc
->ep_type
== DWC_OTG_EP_TYPE_ISOC
) {
1787 * A periodic transfer halted with no other channel
1788 * interrupts set. Assume it was halted by the core
1789 * because it could not be completed in its scheduled
1793 DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
1794 __func__
, hc
->hc_num
);
1796 halt_channel(hcd
, hc
, qtd
, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE
);
1798 DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
1799 "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
1800 __func__
, hc
->hc_num
, hcint
.d32
,
1801 dwc_read_reg32(&hcd
->core_if
->core_global_regs
->gintsts
));
1805 printk(KERN_DEBUG
"NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint
.d32
);
1810 * Handles a host channel Channel Halted interrupt.
1812 * In slave mode, this handler is called only when the driver specifically
1813 * requests a halt. This occurs during handling other host channel interrupts
1814 * (e.g. nak, xacterr, stall, nyet, etc.).
1816 * In DMA mode, this is the interrupt that occurs when the core has finished
1817 * processing a transfer on a channel. Other host channel interrupts (except
1818 * ahberr) are disabled in DMA mode.
1820 static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t
*hcd
,
1822 dwc_otg_hc_regs_t
*hc_regs
,
1825 DWC_DEBUGPL(DBG_HCD
, "--Host Channel %d Interrupt: "
1826 "Channel Halted--\n", hc
->hc_num
);
1828 if (hcd
->core_if
->dma_enable
) {
1829 handle_hc_chhltd_intr_dma(hcd
, hc
, hc_regs
, qtd
);
1832 if (!halt_status_ok(hcd
, hc
, hc_regs
, qtd
)) {
1836 release_channel(hcd
, hc
, qtd
, hc
->halt_status
);
1842 /** Handles interrupt for a specific Host Channel */
1843 int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t
*dwc_otg_hcd
, uint32_t num
)
1847 hcintmsk_data_t hcintmsk
;
1849 dwc_otg_hc_regs_t
*hc_regs
;
1852 DWC_DEBUGPL(DBG_HCDV
, "--Host Channel Interrupt--, Channel %d\n", num
);
1854 hc
= dwc_otg_hcd
->hc_ptr_array
[num
];
1856 check_nakking(dwc_otg_hcd
, __FUNCTION__
, "start");
1859 hc_regs
= dwc_otg_hcd
->core_if
->host_if
->hc_regs
[num
];
1860 qtd
= list_entry(hc
->qh
->qtd_list
.next
, dwc_otg_qtd_t
, qtd_list_entry
);
1862 hcint
.d32
= dwc_read_reg32(&hc_regs
->hcint
);
1863 hcintmsk
.d32
= dwc_read_reg32(&hc_regs
->hcintmsk
);
1864 DWC_DEBUGPL(DBG_HCDV
, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
1865 hcint
.d32
, hcintmsk
.d32
, (hcint
.d32
& hcintmsk
.d32
));
1867 hcint
.d32
= hcint
.d32
& hcintmsk
.d32
;
1869 if (!dwc_otg_hcd
->core_if
->dma_enable
) {
1870 if (hcint
.b
.chhltd
&& hcint
.d32
!= 0x2) {
1875 if (hcint
.b
.xfercomp
) {
1876 retval
|= handle_hc_xfercomp_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1878 * If NYET occurred at same time as Xfer Complete, the NYET is
1879 * handled by the Xfer Complete interrupt handler. Don't want
1880 * to call the NYET interrupt handler in this case.
1884 if (hcint
.b
.chhltd
) {
1885 retval
|= handle_hc_chhltd_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1887 if (hcint
.b
.ahberr
) {
1888 retval
|= handle_hc_ahberr_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1890 if (hcint
.b
.stall
) {
1891 retval
|= handle_hc_stall_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1894 retval
|= handle_hc_nak_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1896 if (hcint
.b
.ack
&& !hcint
.b
.chhltd
) {
1897 retval
|= handle_hc_ack_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1900 retval
|= handle_hc_nyet_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1902 if (hcint
.b
.xacterr
) {
1903 retval
|= handle_hc_xacterr_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1905 if (hcint
.b
.bblerr
) {
1906 retval
|= handle_hc_babble_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1908 if (hcint
.b
.frmovrun
) {
1909 retval
|= handle_hc_frmovrun_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1911 if (hcint
.b
.datatglerr
) {
1912 retval
|= handle_hc_datatglerr_intr(dwc_otg_hcd
, hc
, hc_regs
, qtd
);
1914 if (check_nakking(dwc_otg_hcd
, __FUNCTION__
, "end")) {
1915 DWC_WARN("--Host Channel Interrupt--, Channel %d\n", num
);
1916 DWC_WARN(" hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
1917 hcint
.d32
, hcintmsk
.d32
, (hcint
.d32
& hcintmsk
.d32
));
1923 #endif /* DWC_DEVICE_ONLY */