2 # Copyright (C) 2009-2018 OpenWrt.org
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
7 include $(TOPDIR
)/rules.mk
8 include $(INCLUDE_DIR
)/image.mk
10 # Cook a "WRGG" image, this board is apparently one in the D-Link
11 # WRGG family and uses the exact same firmware format as other
13 define Build
/dir685-image
17 -s wrgns01_dlwbr_dir685RBWW \
25 # Padding added after the rootfs to an even 128k boundary
26 # as this is 128k eraseblocks flash.
27 define Build
/dir685-pad-rootfs
28 $(STAGING_DIR_HOST
)/bin
/padjffs2
$(IMAGE_ROOTFS
) -c
128 >>$@
31 # Build D-Link DNS-313 images using the special header tool.
32 # rootfs.tgz and rd.tgz contains nothing, we only need them
33 # to satisfy the boot loader on the device. The zImage is
34 # the only real content.
35 define Build
/dns313-images
37 chmod
755 $@.tmp
/.boot
39 echo
"dummy" > $@.tmp
/dummyfile
41 dns313-header
$@.tmp
/dummyfile \
42 $@.tmp
/.boot
/rootfs.tgz
43 dns313-header
$@.tmp
/dummyfile \
45 dns313-header
$(IMAGE_KERNEL
) \
50 genext2fs
--block-size
$(BLOCKSIZE
:%k
=%Ki
) \
51 --size-in-blocks
$$((1024 * $(CONFIG_TARGET_KERNEL_PARTSIZE
))) \
53 --root
$@.tmp
$@.tmp-boot
55 # The device firmware needs revision 1 of EXT2
56 tune2fs
-O filetype
$@.tmp-boot
57 e2fsck
-pDf
$@.tmp-boot
> /dev
/null
59 .
/dns313_gen_hdd_img.sh
$@
$@.tmp-boot
$(IMAGE_ROOTFS
) \
60 $(CONFIG_TARGET_KERNEL_PARTSIZE
) \
61 $(CONFIG_TARGET_ROOTFS_PARTSIZE
)
66 define Build
/wiligear-image
67 $(STAGING_DIR_HOST
)/bin
/mkfwimage2 \
68 -m GEOS
-f
0x30000000 -z \
69 -v
$(1).v5.00.SL3512.OpenWrt
.00000.000000.000000 \
70 -p Kernel
:0x020000:0x100000:0:0:$(IMAGE_KERNEL
) \
71 -p Ramdisk
:0x120000:0x500000:0:0:$@ \
77 # Create the default image format used by the StorLink reference design
78 # SL93512r, Raidsonic NAS4220B and Itian Square One SQ201
79 # with the squashfs and overlay inside the "rd.gz" file.
80 # We pad it out to 6144K which is the size of the initramfs partition.
82 # The "application" partition is just blank. You can put anything
83 # there when using OpenWRT. We just use that to create the
84 # "sysupgrade" firmware image.
85 define Build
/storlink-default-images
89 dd if
=/dev
/zero of
=$@.tmp
/hddapp.tgz bs
=6144k count
=1
90 cp
$(IMAGE_KERNEL
) $@.tmp
/zImage
91 cp .
/ImageInfo-
$(1) $@.tmp
/ImageInfo
93 sed
-i
-e
"s/DATESTR/`date +%Y%m%d $(if $(SOURCE_DATE_EPOCH),--date "@
$(SOURCE_DATE_EPOCH
)")`/g" $@.tmp
/ImageInfo
95 (cd
$@.tmp
; tar --sort=name
--owner
=0 --group
=0 --numeric-owner
-czf
$@
* \
96 $(if
$(SOURCE_DATE_EPOCH
),--mtime
="@$(SOURCE_DATE_EPOCH)"))
101 # WBD-111 and WBD-222:
102 # work around the bootloader's bug with extra nops
103 # FIXME: is this really needed now that we no longer append the code
104 # to change the machine ID number? Needs testing on Wiliboard.
105 define Build
/wbd-nops
107 echo
-en
"\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $@
112 # All DTB files are prefixed with "gemini-"
113 define Device
/Default
115 KERNEL_DEPENDS
= $$(wildcard $(DTS_DIR
)/$$(DEVICE_DTS
).dts
)
116 KERNEL_NAME
:= zImage
117 KERNEL
:= kernel-bin | append-dtb
119 SUPPORTED_DEVICES
:= $(subst _
,$(comma
),$(1))
122 # A reasonable set of default packages handling the NAS type
123 # of devices out of the box (former NAS42x0 IcyBox defaults)
124 GEMINI_NAS_PACKAGES
:=kmod-md-mod kmod-md-linear kmod-md-multipath \
125 kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-md-raid456 \
126 kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \
127 kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \
128 kmod-nls-utf8 kmod-usb-storage-extras \
129 samba36-server mdadm cfdisk fdisk e2fsprogs badblocks \
132 # The DIR-685 flash layout is kernel in WRGG format, padded and followed
133 # by the appended rootfs followed by some reasonable JFFS padding, the
134 # remainder will be used by JFFS2 through overlayfs.
136 # - For the factory image, the WRGG image includes the rootfs so that the
137 # default firmware will flash it properly as all it knows is WRGG format.
138 # - For the sysupgrade, we do not include the rootfs in the kernel image
139 # so it is not needelessly tossed into the RAM by the boot loader.
140 # This will be flashed from OpenWrt userland anyways so we only need
141 # the minimum to make the boot loader happy.
142 define Device
/dlink_dir-685
143 DEVICE_VENDOR
:= D-Link
144 DEVICE_MODEL
:= DIR-685 Xtreme N Storage Router
145 DEVICE_DTS
:= gemini-dlink-dir-685
146 DEVICE_PACKAGES
:= $(GEMINI_NAS_PACKAGES
) \
148 IMAGES
:= factory.bin sysupgrade.bin
149 # Pad to 128k erase blocks with 160 bytes WRGG header
150 IMAGE
/factory.bin
:= append-kernel | pad-offset
128k
160 | append-rootfs | dir685-pad-rootfs | dir685-image
151 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
128k
160 | dir685-image | append-rootfs | dir685-pad-rootfs | append-metadata
153 TARGET_DEVICES
+= dlink_dir-685
155 define Device
/dlink_dns-313
156 DEVICE_VENDOR
:= D-Link
157 DEVICE_MODEL
:= DNS-313
1-Bay Network Storage Enclosure
158 DEVICE_DTS
:= gemini-dlink-dns-313
160 DEVICE_PACKAGES
:= $(GEMINI_NAS_PACKAGES
)
163 IMAGES
:= factory.bin.gz
164 IMAGE
/factory.bin.gz
:= dns313-images | gzip
166 TARGET_DEVICES
+= dlink_dns-313
168 # Default images setup used by the StorLink reference designs
169 define Device
/storlink-reference
170 IMAGES
:= factory.bin
171 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | pad-to
6144k | \
172 storlink-default-images
$(1)
173 DEVICE_PACKAGES
:= $(GEMINI_NAS_PACKAGES
)
176 define Device
/itian_sq201
177 $(Device
/storlink-reference
)
178 DEVICE_VENDOR
:= ITian
179 DEVICE_MODEL
:= Square One SQ201
180 DEVICE_DTS
:= gemini-sq201
181 DEVICE_PACKAGES
+= kmod-rt61-pci kmod-usb2-pci
183 TARGET_DEVICES
+= itian_sq201
185 define Device
/raidsonic_ib-4220-b
186 $(Device
/storlink-reference
)
187 DEVICE_VENDOR
:= Raidsonic
188 DEVICE_MODEL
:= NAS IB-4220-B
189 DEVICE_DTS
:= gemini-nas4220b
192 TARGET_DEVICES
+= raidsonic_ib-4220-b
194 define Device
/storlink_sl93512r
195 $(Device
/storlink-reference
)
196 DEVICE_VENDOR
:= StorLink
197 DEVICE_MODEL
:= SL93512r
198 DEVICE_DTS
:= gemini-sl93512r
200 TARGET_DEVICES
+= storlink_sl93512r
203 # The wiliboard images need some changes to be functional and buildable.
205 # The dts would need to use the ecoscentric,redboot-fis-partitions partition
206 # parser to get the correct partition offsets and size.
208 # The mkfwimage2 call need to be adjusted to reflect the real size of kernel
209 # and rootfs. It is expected that the OEM firmware adjusts the on flash
210 # partition table with the values defined in the image header.
211 define Device
/wiliboard_wbd111
212 DEVICE_VENDOR
:= Wiliboard
213 DEVICE_MODEL
:= WBD-111
214 DEVICE_DTS
:= gemini-wbd111
215 KERNEL
:= kernel-bin | append-dtb | wbd-nops
216 IMAGES
:= factory.bin
217 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | wiligear-image
"WILI-S.WILIBOARD"
220 define Device
/wiliboard_wbd222
221 DEVICE_VENDOR
:= Wiliboard
222 DEVICE_MODEL
:= WBD-222
223 DEVICE_DTS
:= gemini-wbd222
224 KERNEL
:= kernel-bin | append-dtb | wbd-nops
225 IMAGES
:= factory.bin
226 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | wiligear-image
"WILI-S.WBD222"
229 $(eval
$(call BuildImage
))