target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch

   1 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
   2 +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
   3 @@ -87,6 +87,12 @@
   4                 };
   5         };
   6
   7 +       rtl8366rb {
   8 +               compatible = "realtek,rtl8366rb";
   9 +               gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
  10 +               gpio-sck = <&gpio0 21 GPIO_ACTIVE_HIGH>;
  11 +       };
  12 +
  13         leds {
  14                 compatible = "gpio-leds";
  15                 led-wps {
  16 @@ -245,6 +251,47 @@
  17                                                 groups = "gpio1bgrp";
  18                                         };
  19                                 };
  20 +                               pinctrl-gmii {
  21 +                                       mux {
  22 +                                               function = "gmii";
  23 +                                               groups = "gmii_gmac0_grp";
  24 +                                       };
  25 +                                       conf0 {
  26 +                                               pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
  27 +                                               skew-delay = <0>;
  28 +                                       };
  29 +                                       conf1 {
  30 +                                               pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
  31 +                                               skew-delay = <15>;
  32 +                                       };
  33 +                                       conf2 {
  34 +                                               pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
  35 +                                               skew-delay = <7>;
  36 +                                       };
  37 +                                       conf3 {
  38 +                                               pins = "U8 GMAC0 TXC";
  39 +                                               skew-delay = <11>;
  40 +                                       };
  41 +                                       conf4 {
  42 +                                               pins = "V11 GMAC1 TXC";
  43 +                                               skew-delay = <10>;
  44 +                                       };
  45 +                                       conf5 {
  46 +                                               pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
  47 +                                                      "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
  48 +                                                      "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
  49 +                                                      "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
  50 +                                                      "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
  51 +                                                      "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
  52 +                                                      "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
  53 +                                                      "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
  54 +                                               skew-delay = <7>;
  55 +                                       };
  56 +                                       conf6 {
  57 +                                               groups = "gmii_gmac0_grp";
  58 +                                               drive-strength = <16>;
  59 +                                       };
  60 +                               };
  61                         };
  62                 };
  63
  64 @@ -286,6 +333,18 @@
  65                                 <0x6000 0 0 4 &pci_intc 2>;
  66                 };
  67
  68 +               ethernet@60000000 {
  69 +                       status = "okay";
  70 +
  71 +                       ethernet-port@0 {
  72 +                               phy-mode = "rgmii";
  73 +                               // phy-handle = <&phy0>;
  74 +                       };
  75 +                       ethernet-port@1 {
  76 +                               /* Not used in this platform */
  77 +                       };
  78 +               };
  79 +
  80                 ata@63000000 {
  81                         status = "okay";
  82                 };