1 From: Daniel Golle <daniel@makrotopia.org>
2 Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
4 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
6 drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
7 1 file changed, 36 insertions(+)
9 --- a/drivers/mtd/ubi/build.c
10 +++ b/drivers/mtd/ubi/build.c
11 @@ -1171,6 +1171,73 @@ static struct mtd_info * __init open_mtd
16 + * This function tries attaching mtd partitions named either "ubi" or "data"
19 +static void __init ubi_auto_attach(void)
22 + struct mtd_info *mtd;
27 + /* try attaching mtd device named "ubi" or "data" */
28 + mtd = open_mtd_device("ubi");
30 + mtd = open_mtd_device("data");
35 + /* get the first not bad block */
36 + if (mtd_can_have_bb(mtd))
37 + while (mtd_block_isbad(mtd, offset)) {
38 + offset += mtd->erasesize;
40 + if (offset > mtd->size) {
41 + pr_err("UBI error: Failed to find a non-bad "
42 + "block on mtd%d\n", mtd->index);
47 + /* check if the read from flash was successful */
48 + err = mtd_read(mtd, offset, 4, &len, (void *) magic);
49 + if ((err && !mtd_is_bitflip(err)) || len != 4) {
50 + pr_err("UBI error: unable to read from mtd%d\n", mtd->index);
54 + /* check for a valid ubi magic */
55 + if (strncmp(magic, "UBI#", 4)) {
56 + pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index);
60 + /* don't auto-add media types where UBI doesn't makes sense */
61 + if (mtd->type != MTD_NANDFLASH &&
62 + mtd->type != MTD_NORFLASH &&
63 + mtd->type != MTD_DATAFLASH &&
64 + mtd->type != MTD_MLCNANDFLASH)
67 + mutex_lock(&ubi_devices_mutex);
68 + pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
69 + err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
70 + mutex_unlock(&ubi_devices_mutex);
72 + pr_err("UBI error: cannot attach mtd%d\n", mtd->index);
79 + put_mtd_device(mtd);
82 static int __init ubi_init(void)
85 @@ -1254,6 +1321,12 @@ static int __init ubi_init(void)
89 + /* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
90 + * parameter was given */
91 + if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
92 + !ubi_is_module() && !mtd_devs)
95 err = ubiblock_init();
97 pr_err("UBI error: block: cannot initialize, error %d\n", err);