2 * Copyright 2013 Gateworks Corporation
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 #include "imx6dl.dtsi"
16 model = "Gateworks Ventana GW51XX";
17 compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
19 /* these are used by bootloader for disabling nodes */
49 reg = <0x10000000 0x40000000>;
53 compatible = "gpio-leds";
57 gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
59 linux,default-trigger = "heartbeat";
64 gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
65 default-state = "off";
70 compatible = "simple-bus";
73 compatible = "regulator-fixed";
74 regulator-name = "2P5V";
75 regulator-min-microvolt = <2500000>;
76 regulator-max-microvolt = <2500000>;
81 compatible = "regulator-fixed";
82 regulator-name = "3P3V";
83 regulator-min-microvolt = <3300000>;
84 regulator-max-microvolt = <3300000>;
88 reg_usb_otg_vbus: usb_otg_vbus {
89 compatible = "regulator-fixed";
90 regulator-name = "usb_otg_vbus";
91 regulator-min-microvolt = <5000000>;
92 regulator-max-microvolt = <5000000>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_enet_1>;
103 phy-reset-gpios = <&gpio1 30 0>;
108 pinctrl-names = "default";
109 pinctrl-0 = <&pinctrl_gpmi_nand_2>;
115 clock-frequency = <100000>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&pinctrl_i2c1_1>;
120 compatible = "atmel,24c02";
126 compatible = "atmel,24c02";
132 compatible = "atmel,24c02";
138 compatible = "atmel,24c02";
144 compatible = "atmel,24c02";
150 compatible = "dallas,ds1672";
155 compatible = "nxp,pca9555";
162 compatible = "gw,gsp";
169 clock-frequency = <100000>;
170 pinctrl-names = "default";
171 pinctrl-0 = <&pinctrl_i2c2_2>;
176 clock-frequency = <100000>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_i2c3_2>;
180 videoin: adv7180@20 {
181 compatible = "adi,adv7180";
187 pinctrl-names = "default";
188 pinctrl-0 = <&pinctrl_hog>;
191 pinctrl_hog: hoggrp {
193 MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
194 MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
195 MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
196 MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
197 MX6DL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
198 MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
199 MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
206 reset-gpio = <&gpio1 0 0>;
211 pinctrl-names = "default";
212 pinctrl-0 = <&pinctrl_uart1_2>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&pinctrl_uart2_1>;
223 pinctrl-names = "default";
224 pinctrl-0 = <&pinctrl_uart3_1>;
229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_uart5_1>;