2 * Copyright 2013 Gateworks Corporation
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 #include "imx6dl.dtsi"
16 model = "Gateworks Ventana GW51XX";
17 compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
19 /* these are used by bootloader for disabling nodes */
34 reg = <0x10000000 0x20000000>;
38 compatible = "gpio-leds";
42 gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
44 linux,default-trigger = "heartbeat";
49 gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
50 default-state = "off";
55 compatible = "simple-bus";
58 compatible = "regulator-fixed";
59 regulator-name = "3P3V";
60 regulator-min-microvolt = <3300000>;
61 regulator-max-microvolt = <3300000>;
66 compatible = "regulator-fixed";
67 regulator-name = "5P0V";
68 regulator-min-microvolt = <5000000>;
69 regulator-max-microvolt = <5000000>;
73 reg_usb_otg_vbus: usb_otg_vbus {
74 compatible = "regulator-fixed";
75 regulator-name = "usb_otg_vbus";
76 regulator-min-microvolt = <5000000>;
77 regulator-max-microvolt = <5000000>;
85 pinctrl-names = "default";
86 pinctrl-0 = <&pinctrl_enet_1>;
88 phy-reset-gpios = <&gpio1 30 0>;
93 pinctrl-names = "default";
94 pinctrl-0 = <&pinctrl_gpmi_nand_2>;
99 clock-frequency = <100000>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_i2c1_1>;
105 compatible = "atmel,24c02";
111 compatible = "atmel,24c02";
117 compatible = "atmel,24c02";
123 compatible = "atmel,24c02";
129 compatible = "nxp,pca9555";
136 compatible = "gw,gsp";
141 compatible = "dallas,ds1672";
147 clock-frequency = <100000>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&pinctrl_i2c2_2>;
153 compatible = "ltc,ltc3676";
157 sw1_reg: ltc3676__sw1 {
158 regulator-min-microvolt = <1175000>;
159 regulator-max-microvolt = <1175000>;
164 sw2_reg: ltc3676__sw2 {
165 regulator-min-microvolt = <1800000>;
166 regulator-max-microvolt = <1800000>;
171 sw3_reg: ltc3676__sw3 {
172 regulator-min-microvolt = <1175000>;
173 regulator-max-microvolt = <1175000>;
178 sw4_reg: ltc3676__sw4 {
179 regulator-min-microvolt = <1500000>;
180 regulator-max-microvolt = <1500000>;
185 ldo2_reg: ltc3676__ldo2 {
186 regulator-min-microvolt = <2500000>;
187 regulator-max-microvolt = <2500000>;
192 ldo4_reg: ltc3676__ldo4 {
193 regulator-min-microvolt = <3000000>;
194 regulator-max-microvolt = <3000000>;
201 clock-frequency = <100000>;
202 pinctrl-names = "default";
203 pinctrl-0 = <&pinctrl_i2c3_2>;
206 videoin: adv7180@20 {
207 compatible = "adi,adv7180";
213 pinctrl-names = "default";
214 pinctrl-0 = <&pinctrl_hog>;
217 pinctrl_hog: hoggrp {
219 MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
220 MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
221 MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
222 MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
223 MX6DL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
224 MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
225 MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
232 reset-gpio = <&gpio1 0 0>;
237 pinctrl-names = "default";
238 pinctrl-0 = <&pinctrl_uart1_2>;
243 pinctrl-names = "default";
244 pinctrl-0 = <&pinctrl_uart2_1>;
249 pinctrl-names = "default";
250 pinctrl-0 = <&pinctrl_uart3_1>;
255 pinctrl-names = "default";
256 pinctrl-0 = <&pinctrl_uart5_1>;
261 vbus-supply = <®_usb_otg_vbus>;
262 pinctrl-names = "default";
263 pinctrl-0 = <&pinctrl_usbotg_1>;
264 disable-over-current;