target/linux/ipq40xx/base-files/etc/board.d/02_network

   1 #
   2 # Copyright (c) 2015 The Linux Foundation. All rights reserved.
   3 # Copyright (c) 2011-2015 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7 . /lib/functions/system.sh
   8
   9 ipq40xx_setup_interfaces()
  10 {
  11         local board="$1"
  12
  13         case "$board" in
  14         8dev,habanero-dvk|\
  15         8dev,jalapeno|\
  16         alfa-network,ap120c-ac|\
  17         engenius,emr3500|\
  18         engenius,ens620ext|\
  19         luma,wrtq-329acn|\
  20         netgear,wac510|\
  21         plasmacloud,pa1200|\
  22         plasmacloud,pa2200)
  23                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
  24                 ;;
  25         aruba,ap-303|\
  26         aruba,ap-365|\
  27         avm,fritzrepeater-1200|\
  28         dlink,dap-2610 |\
  29         engenius,eap1300|\
  30         engenius,emd1|\
  31         meraki,mr33|\
  32         mikrotik,lhgg-60ad|\
  33         mikrotik,sxtsq-5-ac|\
  34         netgear,ex6100v2|\
  35         netgear,ex6150v2|\
  36         zyxel,wre6606)
  37                 ucidef_set_interface_lan "eth0"
  38                 ;;
  39         aruba,ap-303h|\
  40         teltonika,rutx10)
  41                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
  42                 ucidef_add_switch "switch0" \
  43                         "0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
  44                 ;;
  45         asus,map-ac2200|\
  46         cilab,meshpoint-one|\
  47         edgecore,ecw5211|\
  48         edgecore,oap100|\
  49         openmesh,a42|\
  50         openmesh,a62)
  51                 ucidef_set_interfaces_lan_wan "eth1" "eth0"
  52                 ;;
  53         asus,rt-ac58u|\
  54         mikrotik,hap-ac2|\
  55         mikrotik,hap-ac3|\
  56         p2w,r619ac-64m|\
  57         p2w,r619ac-128m|\
  58         zyxel,nbg6617)
  59                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
  60                 ucidef_add_switch "switch0" \
  61                         "0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
  62                 ;;
  63         avm,fritzbox-4040|\
  64         linksys,ea6350v3|\
  65         linksys,ea8300|\
  66         linksys,mr8300)
  67                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
  68                 ucidef_add_switch "switch0" \
  69                         "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
  70                 ;;
  71         avm,fritzbox-7530)
  72                 ucidef_add_switch "switch0" \
  73                         "0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
  74                 ;;
  75         avm,fritzrepeater-3000)
  76                 ucidef_add_switch "switch0" \
  77                         "0u@eth0" "4:lan:1" "5:lan:2"
  78                 ;;
  79         compex,wpj419|\
  80         compex,wpj428|\
  81         engenius,eap2200)
  82                 ucidef_set_interface_lan "eth0 eth1"
  83                 ;;
  84         buffalo,wtr-m2133hp)
  85                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
  86                 ucidef_add_switch "switch0" \
  87                         "0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
  88                 ;;
  89         cellc,rtl30vw)
  90                 ucidef_set_interface_lan "eth0"
  91                 ucidef_add_switch "switch0" \
  92                         "0u@eth0" "3:lan" "4:lan"
  93                 ;;
  94         devolo,magic-2-wifi-next)
  95                 ucidef_set_interface_lan "eth0 eth1 eth2"
  96                 ;;
  97         ezviz,cs-w3-wd1200g-eup)
  98                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
  99                 ucidef_add_switch "switch0" \
 100                         "0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
 101                 ;;
 102         glinet,gl-ap1300 |\
 103         glinet,gl-b1300 |\
 104         glinet,gl-s1300)
 105                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
 106                 ucidef_add_switch "switch0" \
 107                         "0u@eth0" "3:lan" "4:lan"
 108                 ;;
 109         mobipromo,cm520-79f)
 110                 ucidef_add_switch "switch0" \
 111                         "0u@eth0" "3:lan:2" "4:lan:1"
 112                 ucidef_set_interface_wan "eth1"
 113                 ;;
 114         netgear,rbr50|\
 115         netgear,rbs50|\
 116         netgear,srr60|\
 117         netgear,srs60)
 118                 ucidef_add_switch "switch0" \
 119                         "0u@eth0" "2:lan" "3:lan" "4:lan"
 120                 ucidef_set_interface_wan "eth1"
 121                 ;;
 122         qxwlan,e2600ac-c1 |\
 123         qxwlan,e2600ac-c2)
 124                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
 125                 ucidef_add_switch "switch0" \
 126                         "0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
 127                 ;;
 128         unielec,u4019-32m)
 129                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
 130                 ucidef_add_switch "switch0" \
 131                         "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
 132                 ;;
 133         *)
 134                 echo "Unsupported hardware. Network interfaces not initialized"
 135                 ;;
 136         esac
 137 }
 138
 139 ipq40xx_setup_macs()
 140 {
 141         local board="$1"
 142         local lan_mac=""
 143         local wan_mac=""
 144         local label_mac=""
 145
 146         case "$board" in
 147         8dev,habanero-dvk)
 148                 label_mac=$(mtd_get_mac_binary "ART" 0x1006)
 149                 ;;
 150         asus,rt-ac58u)
 151                 CI_UBIPART=UBI_DEV
 152                 wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
 153                 lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
 154                 label_mac=$wan_mac
 155                 ;;
 156         cilab,meshpoint-one)
 157                 label_mac=$(mtd_get_mac_binary "ART" 0x1006)
 158                 ;;
 159         devolo,magic-2-wifi-next)
 160                 lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
 161                 label_mac=$lan_mac
 162                 ;;
 163         dlink,dap-2610)
 164                 lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
 165                 label_mac=$lan_mac
 166                 ;;
 167         engenius,eap2200|\
 168         engenius,emd1)
 169                 lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 170                 label_mac=$lan_mac
 171                 ;;
 172         engenius,emr3500)
 173                 wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
 174                 lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 175                 label_mac=$wan_mac
 176                 ;;
 177         engenius,ens620ext)
 178                 wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
 179                 lan_mac=$(macaddr_add "$wan_mac" 1)
 180                 ;;
 181         ezviz,cs-w3-wd1200g-eup)
 182                 label_mac=$(mtd_get_mac_binary "ART" 0x6)
 183                 ;;
 184         linksys,ea6350v3)
 185                 wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 186                 lan_mac=$(macaddr_add "$wan_mac" 1)
 187                 ;;
 188         mikrotik,hap-ac2|\
 189         mikrotik,hap-ac3)
 190                 wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
 191                 lan_mac=$(macaddr_add $wan_mac 1)
 192                 label_mac="$wan_mac"
 193                 ;;
 194         mikrotik,lhgg-60ad|\
 195         mikrotik,sxtsq-5-ac)
 196                 lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
 197                 label_mac="$lan_mac"
 198                 ;;
 199         esac
 200
 201         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
 202         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
 203         [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
 204 }
 205
 206 board_config_update
 207 board=$(board_name)
 208 ipq40xx_setup_interfaces $board
 209 ipq40xx_setup_macs $board
 210 board_config_flush
 211
 212 exit 0