target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33 |\
  13         meraki,mr74)
  14                 caldata_extract_ubi "ART" 0x9000 0x844
  15                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  16                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
  17                 ;;
  18         esac
  19         ;;
  20 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  21         case "$board" in
  22         asus,map-ac2200)
  23                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  24                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  25                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  26                 ;;
  27         asus,rt-ac42u)
  28                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  29                 ;;
  30         avm,fritzrepeater-3000)
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  33                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  34                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  35                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  36                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  37                 ;;
  38         openmesh,a62 |\
  39         plasmacloud,pa2200)
  40                 caldata_extract "0:ART" 0x9000 0x2f20
  41                 ;;
  42         linksys,ea8300 |\
  43         linksys,mr8300)
  44                 caldata_extract "ART" 0x9000 0x2f20
  45                 # OEM assigns 4 sequential MACs
  46                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  47                 ;;
  48         netgear,rbr50|\
  49         netgear,rbs50|\
  50         netgear,srr60|\
  51         netgear,srs60)
  52                 caldata_extract_mmc "0:ART" 0x9000 0x2f20
  53                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
  54                 ;;
  55         esac
  56         ;;
  57 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  58         case "$board" in
  59         qcom,ap-dk01.1-c1)
  60                 caldata_extract "ART" 0x1000 0x2f20
  61                 ;;
  62         asus,map-ac2200|\
  63         asus,rt-ac42u|\
  64         asus,rt-ac58u)
  65                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  66                 ;;
  67         avm,fritzbox-4040)
  68                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  69                 ;;
  70         avm,fritzbox-7530 |\
  71         avm,fritzrepeater-1200 |\
  72         avm,fritzrepeater-3000)
  73                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  74                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  75                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  76                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  77                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  78                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  79                 ;;
  80         cellc,rtl30vw |\
  81         openmesh,a42 |\
  82         openmesh,a62 |\
  83         plasmacloud,pa1200 |\
  84         plasmacloud,pa2200)
  85                 caldata_extract "0:ART" 0x1000 0x2f20
  86                 ;;
  87         devolo,magic-2-wifi-next)
  88                 caldata_extract "ART" 0x1000 0x2f20
  89                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
  90                 ;;
  91         dlink,dap-2610)
  92                 caldata_extract "ART" 0x1000 0x2f20
  93                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
  94                 ;;
  95         engenius,emd1)
  96                 caldata_extract "0:ART" 0x1000 0x2f20
  97                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
  98                 ;;
  99         engenius,emr3500)
 100                 caldata_extract "0:ART" 0x1000 0x2f20
 101                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 102                 ;;
 103         engenius,ens620ext)
 104                 caldata_extract "ART" 0x1000 0x2f20
 105                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 106                 ;;
 107         extreme-networks,ws-ap3915i)
 108                 caldata_extract "ART" 0x1000 0x2f20
 109                 ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
 110                 ;;
 111         linksys,ea8300 |\
 112         linksys,mr8300)
 113                 caldata_extract "ART" 0x1000 0x2f20
 114                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 115                 ;;
 116         meraki,mr33 |\
 117         meraki,mr74)
 118                 caldata_extract_ubi "ART" 0x1000 0x2f20
 119                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
 120                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
 121                 ;;
 122         mikrotik,cap-ac |\
 123         mikrotik,hap-ac2 |\
 124         mikrotik,hap-ac3 |\
 125         mikrotik,wap-ac)
 126                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 127                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
 128                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
 129                 ;;
 130         netgear,rbr50|\
 131         netgear,rbs50|\
 132         netgear,srr60|\
 133         netgear,srs60)
 134                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 135                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 136                 ;;
 137         pakedge,wr-1)
 138                 caldata_extract "0:ART" 0x1000 0x2f20
 139                 ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
 140                 ;;
 141         teltonika,rutx10)
 142                 caldata_extract "0:ART" 0x1000 0x2f20
 143                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
 144                 ;;
 145         sony,ncp-hg100-cellular)
 146                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 147                 ;;
 148         zyxel,nbg6617 |\
 149         zyxel,wre6606)
 150                 caldata_extract "ART" 0x1000 0x2f20
 151                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 152                 ;;
 153         esac
 154         ;;
 155 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 156         case "$board" in
 157         qcom,ap-dk01.1-c1)
 158                 caldata_extract "ART" 0x5000 0x2f20
 159                 ;;
 160         asus,map-ac2200|\
 161         asus,rt-ac58u)
 162                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 163                 ;;
 164         avm,fritzbox-4040)
 165                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 166                 ;;
 167         avm,fritzbox-7530 |\
 168         avm,fritzrepeater-1200 |\
 169         avm,fritzrepeater-3000)
 170                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 171                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 172                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 173                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 174                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 175                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 176                 ;;
 177         cellc,rtl30vw |\
 178         openmesh,a42 |\
 179         openmesh,a62 |\
 180         plasmacloud,pa1200 |\
 181         plasmacloud,pa2200)
 182                 caldata_extract "0:ART" 0x5000 0x2f20
 183                 ;;
 184         devolo,magic-2-wifi-next)
 185                 caldata_extract "ART" 0x5000 0x2f20
 186                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
 187                 ;;
 188         dlink,dap-2610)
 189                 caldata_extract "ART" 0x5000 0x2f20
 190                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
 191                 ;;
 192         engenius,emd1)
 193                 caldata_extract "0:ART" 0x5000 0x2f20
 194                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
 195                 ;;
 196         engenius,emr3500)
 197                 caldata_extract "0:ART" 0x5000 0x2f20
 198                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
 199                 ;;
 200         engenius,ens620ext)
 201                 caldata_extract "ART" 0x5000 0x2f20
 202                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 203                 ;;
 204         extreme-networks,ws-ap3915i)
 205                 caldata_extract "ART" 0x5000 0x2f20
 206                 ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
 207                 ;;
 208         linksys,ea8300 |\
 209         linksys,mr8300)
 210                 caldata_extract "ART" 0x5000 0x2f20
 211                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 212                 ;;
 213         meraki,mr33 |\
 214         meraki,mr74)
 215                 caldata_extract_ubi "ART" 0x5000 0x2f20
 216                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 217                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
 218                 ;;
 219         mikrotik,cap-ac |\
 220         mikrotik,hap-ac2 |\
 221         mikrotik,hap-ac3 |\
 222         mikrotik,sxtsq-5-ac |\
 223         mikrotik,wap-ac)
 224                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 225                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
 226                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
 227                 ;;
 228         netgear,rbr50|\
 229         netgear,rbs50|\
 230         netgear,srr60|\
 231         netgear,srs60)
 232                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 233                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 234                 ;;
 235         pakedge,wr-1)
 236                 caldata_extract "0:ART" 0x5000 0x2f20
 237                 ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
 238                 ;;
 239         teltonika,rutx10)
 240                 caldata_extract "0:ART" 0x5000 0x2f20
 241                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
 242                 ;;
 243         sony,ncp-hg100-cellular)
 244                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 245                 ;;
 246         zyxel,nbg6617 |\
 247         zyxel,wre6606)
 248                 caldata_extract "ART" 0x5000 0x2f20
 249                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 250                 ;;
 251         esac
 252         ;;
 253 "ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
 254         case "$board" in
 255         mikrotik,cap-ac |\
 256         mikrotik,hap-ac2 |\
 257         mikrotik,hap-ac3 |\
 258         mikrotik,wap-ac)
 259                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 260                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
 261                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
 262                 ;;
 263         esac
 264         ;;
 265 "ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
 266         case "$board" in
 267         mikrotik,cap-ac |\
 268         mikrotik,hap-ac2 |\
 269         mikrotik,hap-ac3 |\
 270         mikrotik,sxtsq-5-ac |\
 271         mikrotik,wap-ac)
 272                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 273                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
 274                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
 275                 ;;
 276         esac
 277         ;;
 278 *)
 279         exit 1
 280         ;;
 281 esac