1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "D-Link DAP 2610";
10 compatible = "dlink,dap-2610";
14 led-failsafe = &led_red;
15 led-running = &led_green;
16 led-upgrade = &led_red;
21 compatible = "qcom,tcsr";
22 reg = <0x1949000 0x100>;
23 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
27 compatible = "qcom,tcsr";
28 reg = <0x1953000 0x1000>;
29 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
33 compatible = "qcom,tcsr";
34 reg = <0x1957000 0x100>;
35 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
52 compatible = "gpio-leds";
56 gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
60 label = "green:power";
61 gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
66 compatible = "gpio-keys";
70 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
71 linux,code = <KEY_RESTART>;
77 pinctrl-0 = <&spi_0_pins>;
78 pinctrl-names = "default";
80 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
83 compatible = "jedec,spi-nor";
85 spi-max-frequency = <24000000>;
90 compatible = "fixed-partitions";
99 reg = <0x40000 0x20000>;
104 reg = <0x60000 0x60000>;
109 reg = <0xc0000 0x10000>;
114 reg = <0xd0000 0x10000>;
119 reg = <0xe0000 0x10000>;
124 reg = <0xf0000 0x80000>;
129 reg = <0x170000 0x10000>;
135 reg = <0x180000 0xdc0000>;
139 reg = <0xfb0000 0x10000>;
144 reg = <0xfc0000 0x10000>;
149 reg = <0xfd0000 0x20000>;
153 label = "certificate";
154 reg = <0xff0000 0x10000>;
159 reg = <0xf40000 0x70000>;
171 pinctrl-0 = <&serial_pins>;
172 pinctrl-names = "default";
199 serial_pins: serial_pinmux {
201 pins = "gpio60", "gpio61";
202 function = "blsp_uart0";
207 spi_0_pins: spi_0_pinmux {
209 function = "blsp_spi0";
210 pins = "gpio55", "gpio56", "gpio57";
211 drive-strength = <12>;
217 drive-strength = <2>;
226 qcom,ath10k-calibration-variant = "dlink,dap-2610";
231 qcom,ath10k-calibration-variant = "dlink,dap-2610";