1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "Linksys EA6350v3";
10 compatible = "linksys,ea6350v3";
14 led-failsafe = &power;
33 compatible = "qcom,tcsr";
34 reg = <0x1949000 0x100>;
35 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
39 compatible = "qcom,tcsr";
40 reg = <0x194b000 0x100>;
41 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
45 compatible = "qcom,tcsr";
46 reg = <0x1953000 0x1000>;
47 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
51 compatible = "qcom,tcsr";
52 reg = <0x1957000 0x100>;
53 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
82 compatible = "gpio-keys";
86 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
87 linux,code = <KEY_RESTART>;
92 gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
93 linux,code = <KEY_WPS_BUTTON>;
98 compatible = "gpio-leds";
101 label = "green:status";
102 gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
108 pinctrl-0 = <&serial_pins>;
109 pinctrl-names = "default";
119 nvmem-cell-names = "pre-calibration";
120 nvmem-cells = <&precal_art_1000>;
121 qcom,ath10k-calibration-variant = "linksys-ea6350v3";
126 nvmem-cell-names = "pre-calibration";
127 nvmem-cells = <&precal_art_5000>;
128 qcom,ath10k-calibration-variant = "linksys-ea6350v3";
136 serial_pins: serial_pinmux {
138 pins = "gpio60", "gpio61";
139 function = "blsp_uart0";
144 spi_0_pins: spi_0_pinmux {
146 function = "blsp_spi0";
147 pins = "gpio55", "gpio56", "gpio57";
148 drive-strength = <12>;
154 pins = "gpio54", "gpio59";
155 drive-strength = <2>;
162 &blsp1_spi1 { /* BLSP1 QUP1 */
163 pinctrl-0 = <&spi_0_pins>;
164 pinctrl-names = "default";
166 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
167 <&tlmm 59 GPIO_ACTIVE_HIGH>;
170 compatible = "jedec,spi-nor";
172 spi-max-frequency = <24000000>;
175 compatible = "fixed-partitions";
176 #address-cells = <1>;
181 reg = <0x00000000 0x00040000>;
186 reg = <0x00040000 0x00020000>;
191 reg = <0x00060000 0x00060000>;
196 reg = <0x000c0000 0x00010000>;
201 reg = <0x000d0000 0x00010000>;
205 label = "APPSBL"; /* uboot */
206 reg = <0x000e0000 0x00080000>;
211 reg = <0x00160000 0x00010000>;
213 compatible = "nvmem-cells";
214 #address-cells = <1>;
217 precal_art_1000: precal@1000 {
218 reg = <0x1000 0x2f20>;
221 precal_art_5000: precal@5000 {
222 reg = <0x5000 0x2f20>;
227 reg = <0x00170000 0x00020000>;
231 reg = <0x00190000 0x00020000>;
235 reg = <0x001b0000 0x00010000>;
237 /* 0x001c0000 - 0x00200000 unused */
243 compatible = "spi-nand";
245 spi-max-frequency = <24000000>;
248 compatible = "fixed-partitions";
249 #address-cells = <1>;
254 reg = <0x00000000 0x02800000>;
258 reg = <0x00300000 0x02500000>;
261 label = "alt_kernel";
262 reg = <0x02800000 0x02800000>;
265 label = "alt_rootfs";
266 reg = <0x02b00000 0x02500000>;
270 reg = <0x05000000 0x00100000>;
274 reg = <0x05100000 0x02F00000>;
276 /* 0x00000000 - 0x08000000: 128 MiB */