1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "Linksys EA6350v3";
10 compatible = "linksys,ea6350v3";
14 led-failsafe = &power;
29 compatible = "qcom,tcsr";
30 reg = <0x1949000 0x100>;
31 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
35 compatible = "qcom,tcsr";
36 reg = <0x194b000 0x100>;
37 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
41 compatible = "qcom,tcsr";
42 reg = <0x1953000 0x1000>;
43 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
47 compatible = "qcom,tcsr";
48 reg = <0x1957000 0x100>;
49 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
70 compatible = "gpio-keys";
74 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
75 linux,code = <KEY_RESTART>;
80 gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
81 linux,code = <KEY_WPS_BUTTON>;
86 compatible = "gpio-leds";
89 label = "green:status";
90 gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
96 pinctrl-0 = <&serial_pins>;
97 pinctrl-names = "default";
135 nvmem-cell-names = "pre-calibration";
136 nvmem-cells = <&precal_art_1000>;
137 qcom,ath10k-calibration-variant = "linksys-ea6350v3";
142 nvmem-cell-names = "pre-calibration";
143 nvmem-cells = <&precal_art_5000>;
144 qcom,ath10k-calibration-variant = "linksys-ea6350v3";
152 serial_pins: serial_pinmux {
154 pins = "gpio60", "gpio61";
155 function = "blsp_uart0";
160 spi_0_pins: spi_0_pinmux {
162 function = "blsp_spi0";
163 pins = "gpio55", "gpio56", "gpio57";
164 drive-strength = <12>;
170 pins = "gpio54", "gpio59";
171 drive-strength = <2>;
178 &blsp1_spi1 { /* BLSP1 QUP1 */
179 pinctrl-0 = <&spi_0_pins>;
180 pinctrl-names = "default";
182 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
183 <&tlmm 59 GPIO_ACTIVE_HIGH>;
186 compatible = "jedec,spi-nor";
188 spi-max-frequency = <24000000>;
191 compatible = "fixed-partitions";
192 #address-cells = <1>;
197 reg = <0x00000000 0x00040000>;
202 reg = <0x00040000 0x00020000>;
207 reg = <0x00060000 0x00060000>;
212 reg = <0x000c0000 0x00010000>;
217 reg = <0x000d0000 0x00010000>;
221 label = "APPSBL"; /* uboot */
222 reg = <0x000e0000 0x00080000>;
227 reg = <0x00160000 0x00010000>;
231 compatible = "fixed-layout";
232 #address-cells = <1>;
235 precal_art_1000: precal@1000 {
236 reg = <0x1000 0x2f20>;
239 precal_art_5000: precal@5000 {
240 reg = <0x5000 0x2f20>;
246 reg = <0x00170000 0x00020000>;
250 reg = <0x00190000 0x00020000>;
254 reg = <0x001b0000 0x00010000>;
256 /* 0x001c0000 - 0x00200000 unused */
262 compatible = "spi-nand";
264 spi-max-frequency = <24000000>;
267 compatible = "fixed-partitions";
268 #address-cells = <1>;
273 reg = <0x00000000 0x02800000>;
277 reg = <0x00500000 0x02300000>;
280 label = "alt_kernel";
281 reg = <0x02800000 0x02800000>;
284 label = "alt_rootfs";
285 reg = <0x02d00000 0x02300000>;
289 reg = <0x05000000 0x00100000>;
293 reg = <0x05100000 0x02F00000>;
295 /* 0x00000000 - 0x08000000: 128 MiB */