target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "Edgecore ECW5211";
  10         compatible = "edgecore,ecw5211";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &gmac0;
  18         };
  19
  20         chosen {
  21                 bootargs-append = " root=/dev/ubiblock0_1";
  22         };
  23
  24         keys {
  25                 compatible = "gpio-keys";
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32         };
  33
  34         leds {
  35                 compatible = "gpio-leds";
  36
  37                 led_power: power {
  38                         label = "yellow:power";
  39                         gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 wlan2g {
  43                         label = "green:wlan2g";
  44                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
  45                         linux,default-trigger = "phy0tpt";
  46                 };
  47
  48                 wlan5g {
  49                         label = "green:wlan5g";
  50                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
  51                         linux,default-trigger = "phy1tpt";
  52                 };
  53         };
  54
  55         soc {
  56                 rng@22000 {
  57                         status = "okay";
  58                 };
  59
  60                 ess-psgmii@98000 {
  61                         status = "okay";
  62                 };
  63
  64                 counter@4a1000 {
  65                         compatible = "qcom,qca-gcnt";
  66                         reg = <0x4a1000 0x4>;
  67                 };
  68
  69                 tcsr@1949000 {
  70                         compatible = "qcom,tcsr";
  71                         reg = <0x1949000 0x100>;
  72                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  73                 };
  74
  75                 tcsr@194b000 {
  76                         compatible = "qcom,tcsr";
  77                         reg = <0x194b000 0x100>;
  78                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  79                 };
  80
  81                 ess_tcsr@1953000 {
  82                         compatible = "qcom,tcsr";
  83                         reg = <0x1953000 0x1000>;
  84                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  85                 };
  86
  87                 tcsr@1957000 {
  88                         compatible = "qcom,tcsr";
  89                         reg = <0x1957000 0x100>;
  90                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  91                 };
  92
  93                 usb2@60f8800 {
  94                         status = "okay";
  95                 };
  96
  97                 usb3@8af8800 {
  98                         status = "okay";
  99
 100                         dwc3@8a00000 {
 101                                 phys = <&usb3_hs_phy>;
 102                                 phy-names = "usb2-phy";
 103                         };
 104                 };
 105
 106                 crypto@8e3a000 {
 107                         status = "okay";
 108                 };
 109
 110                 watchdog@b017000 {
 111                         status = "okay";
 112                 };
 113
 114                 ess-switch@c000000 {
 115                         status = "okay";
 116
 117                         switch_lan_bmp = <0x10>;
 118                         switch_wan_bmp = <0x20>;
 119                 };
 120
 121                 edma@c080000 {
 122                         status = "okay";
 123                 };
 124         };
 125 };
 126
 127 &tlmm {
 128         mdio_pins: mdio_pinmux {
 129                 mux_mdio {
 130                         pins = "gpio53";
 131                         function = "mdio";
 132                         bias-pull-up;
 133                 };
 134
 135                 mux_mdc {
 136                         pins = "gpio52";
 137                         function = "mdc";
 138                         bias-pull-up;
 139                 };
 140         };
 141
 142         serial_pins: serial_pinmux {
 143                 mux {
 144                         pins = "gpio60", "gpio61";
 145                         function = "blsp_uart0";
 146                         bias-disable;
 147                 };
 148         };
 149
 150         spi0_pins: spi0_pinmux {
 151                 pin {
 152                         function = "blsp_spi0";
 153                         pins = "gpio55", "gpio56", "gpio57";
 154                         drive-strength = <2>;
 155                         bias-disable;
 156                 };
 157
 158                 pin_cs {
 159                         function = "gpio";
 160                         pins = "gpio54", "gpio4";
 161                         drive-strength = <2>;
 162                         bias-disable;
 163                         output-high;
 164                 };
 165         };
 166
 167         i2c0_pins: i2c0_pinmux {
 168                 mux_i2c {
 169                         function = "blsp_i2c0";
 170                         pins = "gpio58", "gpio59";
 171                         drive-strength = <16>;
 172                         bias-disable;
 173                 };
 174         };
 175 };
 176
 177 &blsp_dma {
 178         status = "okay";
 179 };
 180
 181 &blsp1_spi1 {
 182         status = "okay";
 183
 184         pinctrl-0 = <&spi0_pins>;
 185         pinctrl-names = "default";
 186         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
 187
 188         flash@0 {
 189                 compatible = "jedec,spi-nor";
 190                 reg = <0>;
 191                 spi-max-frequency = <24000000>;
 192
 193                 partitions {
 194                         compatible = "fixed-partitions";
 195                         #address-cells = <1>;
 196                         #size-cells = <1>;
 197
 198                         partition@0 {
 199                                 label = "0:SBL1";
 200                                 reg = <0x00000000 0x00040000>;
 201                                 read-only;
 202                         };
 203
 204                         partition@40000 {
 205                                 label = "0:MIBIB";
 206                                 reg = <0x00040000 0x00020000>;
 207                                 read-only;
 208                         };
 209
 210                         partition@60000 {
 211                                 label = "0:QSEE";
 212                                 reg = <0x00060000 0x00060000>;
 213                                 read-only;
 214                         };
 215
 216                         partition@c0000 {
 217                                 label = "0:CDT";
 218                                 reg = <0x000c0000 0x00010000>;
 219                                 read-only;
 220                         };
 221
 222                         partition@d0000 {
 223                                 label = "0:DDRPARAMS";
 224                                 reg = <0x000d0000 0x00010000>;
 225                                 read-only;
 226                         };
 227
 228                         partition@e0000 {
 229                                 label = "0:APPSBLENV"; /* uboot env */
 230                                 reg = <0x000e0000 0x00010000>;
 231                         };
 232
 233                         partition@f0000 {
 234                                 label = "0:APPSBL"; /* uboot */
 235                                 reg = <0x000f0000 0x00080000>;
 236                                 read-only;
 237                         };
 238
 239                         partition@170000 {
 240                                 label = "0:ART";
 241                                 reg = <0x00170000 0x00010000>;
 242                                 read-only;
 243                         };
 244                 };
 245         };
 246
 247         flash@1 {
 248                 compatible = "spi-nand";
 249                 reg = <1>;
 250                 spi-max-frequency = <24000000>;
 251
 252                 partitions {
 253                         compatible = "fixed-partitions";
 254                         #address-cells = <1>;
 255                         #size-cells = <1>;
 256
 257                         partition@0 {
 258                                 label = "rootfs";
 259                                 reg = <0x00000000 0x04000000>;
 260                         };
 261                 };
 262         };
 263 };
 264
 265 &blsp1_i2c3 {
 266         status = "okay";
 267
 268         pinctrl-0 = <&i2c0_pins>;
 269         pinctrl-names = "default";
 270
 271         tpm@29 {
 272                 compatible = "atmel,at97sc3204t";
 273                 reg = <0x29>;
 274         };
 275 };
 276
 277 &blsp1_uart1 {
 278         status = "okay";
 279
 280         pinctrl-0 = <&serial_pins>;
 281         pinctrl-names = "default";
 282 };
 283
 284 &cryptobam {
 285         status = "okay";
 286 };
 287
 288 &mdio {
 289         status = "okay";
 290
 291         pinctrl-0 = <&mdio_pins>;
 292         pinctrl-names = "default";
 293 };
 294
 295 &gmac0 {
 296         qcom,poll_required = <1>;
 297         qcom,phy_mdio_addr = <4>;
 298         vlan_tag = <2 0x20>;
 299 };
 300
 301 &gmac1 {
 302         qcom,poll_required = <1>;
 303         qcom,phy_mdio_addr = <3>;
 304         vlan_tag = <1 0x10>;
 305 };
 306
 307 &wifi0 {
 308         status = "okay";
 309 };
 310
 311 &wifi1 {
 312         status = "okay";
 313
 314         qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
 315 };
 316
 317 &usb3_hs_phy {
 318         status = "okay";
 319 };
 320
 321 &usb2_hs_phy {
 322         status = "okay";
 323 };