1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "EnGenius ENS620EXT";
10 compatible = "engenius,ens620ext";
13 device_type = "memory";
14 reg = <0x80000000 0x10000000>;
19 led-failsafe = &power;
38 compatible = "qcom,tcsr";
39 reg = <0x1949000 0x100>;
40 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
44 compatible = "qcom,tcsr";
45 reg = <0x1953000 0x1000>;
46 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
50 compatible = "qcom,tcsr";
51 reg = <0x1957000 0x100>;
52 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
72 * Disable the broken restart as a workaround for the buggy
73 * 3.0.0/3.0.1 U-boots that ship with the device.
74 * Note: The watchdog is now used to restart this device.
82 compatible = "gpio-keys";
86 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
87 linux,code = <KEY_WPS_BUTTON>;
92 compatible = "gpio-leds";
95 label = "amber:power";
96 gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
100 label = "green:lan1";
101 gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
105 label = "green:lan2";
106 gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
110 label = "green:wlan2g";
111 gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
115 label = "green:wlan5g";
116 gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
130 serial_pins: serial_pinmux {
132 pins = "gpio60", "gpio61";
133 function = "blsp_uart0";
138 spi_0_pins: spi_0_pinmux {
140 function = "blsp_spi0";
141 pins = "gpio55", "gpio56", "gpio57";
142 drive-strength = <12>;
149 drive-strength = <2>;
156 &blsp1_spi1 { /* BLSP1 QUP1 */
157 pinctrl-0 = <&spi_0_pins>;
158 pinctrl-names = "default";
160 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
163 #address-cells = <1>;
165 compatible = "jedec,spi-nor";
167 spi-max-frequency = <50000000>;
171 compatible = "fixed-partitions";
172 #address-cells = <1>;
177 reg = <0x00000000 0x00040000>;
182 reg = <0x00040000 0x00020000>;
187 reg = <0x00060000 0x00060000>;
192 reg = <0x000c0000 0x00010000>;
197 reg = <0x000d0000 0x00010000>;
201 label = "APPSBLENV"; /* uboot env*/
202 reg = <0x000e0000 0x00010000>;
206 label = "APPSBL"; /* uboot */
207 reg = <0x000f0000 0x00090000>;
212 reg = <0x00180000 0x00010000>;
216 compatible = "denx,fit";
218 reg = <0x00190000 0x14d0000>;
222 reg = <0x01660000 0x008F0000>;
226 label = "u-boot-env";
227 reg = <0x01f50000 0x00010000>;
231 label = "userconfig";
232 reg = <0x01f60000 0x000a0000>;
240 pinctrl-0 = <&serial_pins>;
241 pinctrl-names = "default";
259 qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
264 qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";