1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/leds/common.h>
7 #include <dt-bindings/soc/qcom,tcsr.h>
10 model = "AVM FRITZ!Box 4040";
11 compatible = "avm,fritzbox-4040";
15 led-failsafe = &flash;
18 label-mac-device = &gmac;
31 compatible = "qcom,tcsr";
32 reg = <0x1949000 0x100>;
33 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
37 compatible = "qcom,tcsr";
38 reg = <0x194b000 0x100>;
39 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
43 compatible = "qcom,tcsr";
44 reg = <0x1953000 0x1000>;
45 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
49 compatible = "qcom,tcsr";
50 reg = <0x1957000 0x100>;
51 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
72 compatible = "gpio-keys";
76 gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
77 linux,code = <KEY_RFKILL>;
82 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
83 linux,code = <KEY_WPS_BUTTON>;
88 compatible = "gpio-leds";
91 function = LED_FUNCTION_WLAN;
92 color = <LED_COLOR_ID_GREEN>;
93 gpios = <ðphy0 0 GPIO_ACTIVE_HIGH>;
98 gpios = <ðphy0 1 GPIO_ACTIVE_HIGH>;
103 function = LED_FUNCTION_WAN;
104 color = <LED_COLOR_ID_GREEN>;
105 gpios = <ðphy1 0 GPIO_ACTIVE_HIGH>;
109 function = LED_FUNCTION_POWER;
110 color = <LED_COLOR_ID_GREEN>;
111 gpios = <ðphy2 1 GPIO_ACTIVE_HIGH>;
115 function = LED_FUNCTION_LAN;
116 color = <LED_COLOR_ID_GREEN>;
117 gpios = <ðphy3 0 GPIO_ACTIVE_HIGH>;
121 label = "amber:info";
122 gpios = <ðphy3 1 GPIO_ACTIVE_HIGH>;
128 serial_pins: serial_pinmux {
130 pins = "gpio60", "gpio61";
131 function = "blsp_uart0";
136 spi_0_pins: spi_0_pinmux {
138 function = "blsp_spi0";
139 pins = "gpio55", "gpio56", "gpio57";
140 drive-strength = <12>;
147 drive-strength = <2>;
162 &blsp1_spi1 { /* BLSP1 QUP1 */
163 pinctrl-0 = <&spi_0_pins>;
164 pinctrl-names = "default";
166 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
169 compatible = "jedec,spi-nor";
171 spi-max-frequency = <24000000>;
176 compatible = "fixed-partitions";
177 #address-cells = <1>;
182 reg = <0x00000000 0x00040000>;
187 reg = <0x00040000 0x00020000>;
192 reg = <0x00060000 0x00060000>;
197 reg = <0x000c0000 0x00010000>;
202 reg = <0x000d0000 0x00010000>;
206 label = "APPSBLENV"; /* uboot env - empty */
207 reg = <0x000e0000 0x00010000>;
211 label = "urlader"; /* APPSBL */
212 reg = <0x000f0000 0x0002dc000>;
216 /* make a backup of this partition! */
217 label = "urlader_config";
218 reg = <0x0011dc00 0x00002400>;
223 reg = <0x00120000 0x00080000>;
228 reg = <0x001a0000 0x00080000>;
233 reg = <0x00220000 0x00080000>;
237 compatible = "denx,fit";
239 reg = <0x002a0000 0x01c60000>;
241 partition12@1f00000 {
243 reg = <0x01f00000 0x00100000>;
250 pinctrl-0 = <&serial_pins>;
251 pinctrl-names = "default";
266 line-name = "enable USB3 power";
267 gpios = <1 GPIO_ACTIVE_HIGH>;
324 qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
329 qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";