target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "MobiPromo CM520-79F";
  10         compatible = "mobipromo,cm520-79f";
  11
  12         aliases {
  13                 led-boot = &led_sys;
  14                 led-failsafe = &led_sys;
  15                 led-running = &led_sys;
  16                 led-upgrade = &led_sys;
  17         };
  18
  19         soc {
  20                 rng@22000 {
  21                         status = "okay";
  22                 };
  23
  24                 mdio@90000 {
  25                         status = "okay";
  26                         pinctrl-0 = <&mdio_pins>;
  27                         pinctrl-names = "default";
  28                         reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
  29                         reset-delay-us = <1000>;
  30                 };
  31
  32                 tcsr@1949000 {
  33                         compatible = "qcom,tcsr";
  34                         reg = <0x1949000 0x100>;
  35                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  36                 };
  37
  38                 tcsr@194b000 {
  39                         compatible = "qcom,tcsr";
  40                         reg = <0x194b000 0x100>;
  41                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  42                 };
  43
  44                 ess_tcsr@1953000 {
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x1953000 0x1000>;
  47                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  48                 };
  49
  50                 tcsr@1957000 {
  51                         compatible = "qcom,tcsr";
  52                         reg = <0x1957000 0x100>;
  53                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  54                 };
  55
  56                 usb2@60f8800 {
  57                         status = "okay";
  58
  59                         dwc3@6000000 {
  60                                 #address-cells = <1>;
  61                                 #size-cells = <0>;
  62
  63                                 usb2_port1: port@1 {
  64                                         reg = <1>;
  65                                         #trigger-source-cells = <0>;
  66                                 };
  67                         };
  68                 };
  69
  70                 usb3@8af8800 {
  71                         status = "okay";
  72
  73                         dwc3@8a00000 {
  74                                 #address-cells = <1>;
  75                                 #size-cells = <0>;
  76
  77                                 usb3_port1: port@1 {
  78                                         reg = <1>;
  79                                         #trigger-source-cells = <0>;
  80                                 };
  81
  82                                 usb3_port2: port@2 {
  83                                         reg = <2>;
  84                                         #trigger-source-cells = <0>;
  85                                 };
  86                         };
  87                 };
  88
  89                 crypto@8e3a000 {
  90                         status = "okay";
  91                 };
  92
  93                 watchdog@b017000 {
  94                         status = "okay";
  95                 };
  96         };
  97
  98         led_spi {
  99                 compatible = "spi-gpio";
 100                 #address-cells = <1>;
 101                 #size-cells = <0>;
 102
 103                 sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
 104                 mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
 105                 num-chipselects = <0>;
 106
 107                 led_gpio: led_gpio@0 {
 108                         compatible = "fairchild,74hc595";
 109                         reg = <0>;
 110                         gpio-controller;
 111                         #gpio-cells = <2>;
 112                         registers-number = <1>;
 113                         spi-max-frequency = <1000000>;
 114                 };
 115         };
 116
 117         leds {
 118                 compatible = "gpio-leds";
 119
 120                 usb {
 121                         label = "blue:usb";
 122                         gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
 123                         linux,default-trigger = "usbport";
 124                         trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
 125                 };
 126
 127                 led_sys: can {
 128                         label = "blue:can";
 129                         gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
 130                 };
 131
 132                 wan {
 133                         label = "blue:wan";
 134                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
 135                 };
 136
 137                 lan1 {
 138                         label = "blue:lan1";
 139                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 140                 };
 141
 142                 lan2 {
 143                         label = "blue:lan2";
 144                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 145                 };
 146
 147                 wlan2g {
 148                         label = "blue:wlan2g";
 149                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
 150                         linux,default-trigger = "phy0tpt";
 151                 };
 152
 153                 wlan5g {
 154                         label = "blue:wlan5g";
 155                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
 156                         linux,default-trigger = "phy1tpt";
 157                 };
 158         };
 159
 160         keys {
 161                 compatible = "gpio-keys";
 162
 163                 reset {
 164                         label = "reset";
 165                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
 166                         linux,code = <KEY_RESTART>;
 167                 };
 168         };
 169 };
 170
 171 &blsp_dma {
 172         status = "okay";
 173 };
 174
 175 &blsp1_uart1 {
 176         status = "okay";
 177 };
 178
 179 &blsp1_uart2 {
 180         status = "okay";
 181 };
 182
 183 &cryptobam {
 184         status = "okay";
 185 };
 186
 187 &nand {
 188         pinctrl-0 = <&nand_pins>;
 189         pinctrl-names = "default";
 190         status = "okay";
 191
 192         nand@0 {
 193                 partitions {
 194                         compatible = "fixed-partitions";
 195                         #address-cells = <1>;
 196                         #size-cells = <1>;
 197
 198                         partition@0 {
 199                                 label = "SBL1";
 200                                 reg = <0x0 0x100000>;
 201                                 read-only;
 202                         };
 203
 204                         partition@100000 {
 205                                 label = "MIBIB";
 206                                 reg = <0x100000 0x100000>;
 207                                 read-only;
 208                         };
 209
 210                         partition@200000 {
 211                                 label = "BOOTCONFIG";
 212                                 reg = <0x200000 0x100000>;
 213                         };
 214
 215                         partition@300000 {
 216                                 label = "QSEE";
 217                                 reg = <0x300000 0x100000>;
 218                                 read-only;
 219                         };
 220
 221                         partition@400000 {
 222                                 label = "QSEE_1";
 223                                 reg = <0x400000 0x100000>;
 224                                 read-only;
 225                         };
 226
 227                         partition@500000 {
 228                                 label = "CDT";
 229                                 reg = <0x500000 0x80000>;
 230                                 read-only;
 231                         };
 232
 233                         partition@580000 {
 234                                 label = "CDT_1";
 235                                 reg = <0x580000 0x80000>;
 236                                 read-only;
 237                         };
 238
 239                         partition@600000 {
 240                                 label = "BOOTCONFIG1";
 241                                 reg = <0x600000 0x80000>;
 242                         };
 243
 244                         partition@680000 {
 245                                 label = "APPSBLENV";
 246                                 reg = <0x680000 0x80000>;
 247                         };
 248
 249                         partition@700000 {
 250                                 label = "APPSBL";
 251                                 reg = <0x700000 0x200000>;
 252                                 read-only;
 253                         };
 254
 255                         partition@900000 {
 256                                 label = "APPSBL_1";
 257                                 reg = <0x900000 0x200000>;
 258                                 read-only;
 259                         };
 260
 261                         art: partition@b00000 {
 262                                 label = "ART";
 263                                 reg = <0xb00000 0x80000>;
 264                                 read-only;
 265                                 compatible = "nvmem-cells";
 266                                 #address-cells = <1>;
 267                                 #size-cells = <1>;
 268
 269                                 precal_art_1000: precal@1000 {
 270                                         reg = <0x1000 0x2f20>;
 271                                 };
 272
 273                                 macaddr_art_1006: macaddr@1006 {
 274                                         reg = <0x1006 0x6>;
 275                                 };
 276
 277                                 precal_art_5000: precal@5000 {
 278                                         reg = <0x5000 0x2f20>;
 279                                 };
 280
 281                                 macaddr_art_5006: macaddr@5006 {
 282                                         reg = <0x5006 0x6>;
 283                                 };
 284                         };
 285
 286                         partition@b80000 {
 287                                 label = "ubi";
 288                                 reg = <0xb80000 0x7480000>;
 289                         };
 290                 };
 291         };
 292 };
 293
 294 &qpic_bam {
 295         status = "okay";
 296 };
 297
 298 &tlmm {
 299         mdio_pins: mdio_pinmux {
 300                 mux_1 {
 301                         pins = "gpio6";
 302                         function = "mdio";
 303                         bias-pull-up;
 304                 };
 305
 306                 mux_2 {
 307                         pins = "gpio7";
 308                         function = "mdc";
 309                         bias-pull-up;
 310                 };
 311         };
 312
 313         nand_pins: nand_pins {
 314                 pullups {
 315                         pins =  "gpio52", "gpio53", "gpio58",
 316                                 "gpio59";
 317                         function = "qpic";
 318                         bias-pull-up;
 319                 };
 320
 321                 pulldowns {
 322                         pins =  "gpio54", "gpio55", "gpio56",
 323                                 "gpio57", "gpio60", "gpio61",
 324                                 "gpio62", "gpio63", "gpio64",
 325                                 "gpio65", "gpio66", "gpio67",
 326                                 "gpio68", "gpio69";
 327                         function = "qpic";
 328                         bias-pull-down;
 329                 };
 330         };
 331 };
 332
 333 &usb3_ss_phy {
 334         status = "okay";
 335 };
 336
 337 &usb3_hs_phy {
 338         status = "okay";
 339 };
 340
 341 &usb2_hs_phy {
 342         status = "okay";
 343 };
 344
 345 &gmac {
 346         status = "okay";
 347
 348         nvmem-cells = <&macaddr_art_1006>;
 349         nvmem-cell-names = "mac-address";
 350 };
 351
 352 &switch {
 353         status = "okay";
 354 };
 355
 356 &swport3 {
 357         status = "okay";
 358
 359         label = "lan2";
 360 };
 361
 362 &swport4 {
 363         status = "okay";
 364
 365         label = "lan1";
 366 };
 367
 368 &swport5 {
 369         status = "okay";
 370
 371         nvmem-cells = <&macaddr_art_5006>;
 372         nvmem-cell-names = "mac-address";
 373 };
 374
 375 &wifi0 {
 376         status = "okay";
 377         nvmem-cell-names = "pre-calibration";
 378         nvmem-cells = <&precal_art_1000>;
 379         qcom,ath10k-calibration-variant = "CM520-79F";
 380 };
 381
 382 &wifi1 {
 383         status = "okay";
 384         nvmem-cell-names = "pre-calibration";
 385         nvmem-cells = <&precal_art_5000>;
 386         qcom,ath10k-calibration-variant = "CM520-79F";
 387 };