1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "AVM FRITZ!Box 7530";
10 compatible = "avm,fritzbox-7530";
13 led-boot = &power_green;
14 led-failsafe = &info_red;
15 led-running = &power_green;
16 led-upgrade = &info_green;
33 compatible = "qcom,tcsr";
34 reg = <0x1949000 0x100>;
35 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
39 compatible = "qcom,tcsr";
40 reg = <0x194b000 0x100>;
41 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
45 compatible = "qcom,tcsr";
46 reg = <0x1953000 0x1000>;
47 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
51 compatible = "qcom,tcsr";
52 reg = <0x1957000 0x100>;
53 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
79 compatible = "gpio-keys";
83 gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
84 linux,code = <KEY_RFKILL>;
89 gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
90 linux,code = <KEY_WPS_BUTTON>;
95 gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
96 linux,code = <KEY_PHONE>;
101 compatible = "gpio-leds";
104 label = "fritzbox-7530:red:info";
105 gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
109 label = "fritzbox-7530:green:info";
110 gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
114 label = "fritzbox-7530:green:wlan";
115 gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
119 label = "fritzbox-7530:green:fon";
120 gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
124 label = "fritzbox-7530:green:power";
125 gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
129 label = "fritzbox-7530:green:wps";
130 gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
136 serial_0_pins: serial_pinmux {
138 pins = "gpio16", "gpio17";
139 function = "blsp_uart0";
144 nand_pins: nand_pins {
146 pins = "gpio53", "gpio58", "gpio59";
152 pins = "gpio54", "gpio55", "gpio56",
153 "gpio57", "gpio60", "gpio61",
154 "gpio62", "gpio63", "gpio64",
155 "gpio65", "gpio66", "gpio67",
163 line-name = "enable USB3 power";
164 gpios = <49 GPIO_ACTIVE_HIGH>;
171 pinctrl-0 = <&nand_pins>;
172 pinctrl-names = "default";
177 compatible = "fixed-partitions";
178 #address-cells = <1>;
183 reg = <0x000000 0x80000>;
189 reg = <0x080000 0x80000>;
195 reg = <0x100000 0x80000>;
201 reg = <0x180000 0x40000>;
207 reg = <0x1c0000 0x80000>;
213 reg = <0x240000 0x40000>;
219 reg = <0x280000 0x40000>;
225 reg = <0x2c0000 0x840000>;
230 /* 'kernel1' in AVM firmware */
232 reg = <0xb00000 0x400000>;
236 /* 'kernel2' in AVM firmware */
238 reg = <0xf00000 0x400000>;
243 reg = <0x1300000 0x6d00000>;
258 pinctrl-0 = <&serial_0_pins>;
259 pinctrl-names = "default";
277 qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
282 qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
288 perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
289 wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
292 reg = <0x00000000 0 0 0 0>;
293 #address-cells = <3>;
298 compatible = "intel,vrx518";
300 reg = <0x00010000 0 0 0 0>;