1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "AVM FRITZ!Repeater 3000";
10 compatible = "avm,fritzrepeater-3000";
13 led-boot = &power_led;
14 led-failsafe = &power_led;
15 led-running = &power_led;
16 led-upgrade = &power_led;
33 compatible = "qcom,tcsr";
34 reg = <0x1949000 0x100>;
35 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
39 compatible = "qcom,tcsr";
40 reg = <0x1953000 0x1000>;
41 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
45 compatible = "qcom,tcsr";
46 reg = <0x1957000 0x100>;
47 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
61 switch_lan_bmp = <0x10>;
62 switch_wan_bmp = <0x20>;
71 compatible = "gpio-keys";
75 gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
76 linux,code = <KEY_WPS_BUTTON>;
81 compatible = "gpio-leds";
84 label = "fritzwlan-3000:red:connect";
85 gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
89 label = "fritzwlan-3000:green:connect";
90 gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
94 label = "fritzwlan-3000:blue:connect";
95 gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
99 label = "fritzwlan-3000:green:power";
100 gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
106 serial_0_pins: serial_pinmux {
108 pins = "gpio16", "gpio17";
109 function = "blsp_uart0";
114 nand_pins: nand_pins {
116 pins = "gpio53", "gpio58", "gpio59";
122 pins = "gpio54", "gpio55", "gpio56",
123 "gpio57", "gpio60", "gpio61",
124 "gpio62", "gpio63", "gpio64",
125 "gpio65", "gpio66", "gpio67",
134 pinctrl-0 = <&nand_pins>;
135 pinctrl-names = "default";
140 compatible = "fixed-partitions";
141 #address-cells = <1>;
146 reg = <0x000000 0x80000>;
152 reg = <0x080000 0x80000>;
158 reg = <0x100000 0x80000>;
164 reg = <0x180000 0x40000>;
170 reg = <0x1c0000 0x80000>;
176 reg = <0x240000 0x40000>;
182 reg = <0x280000 0x40000>;
188 reg = <0x2c0000 0x840000>;
193 /* 'kernel1' in AVM firmware */
195 reg = <0xb00000 0x400000>;
199 /* 'kernel2' in AVM firmware */
201 reg = <0xf00000 0x400000>;
206 reg = <0x1300000 0x6d00000>;
221 pinctrl-0 = <&serial_0_pins>;
222 pinctrl-names = "default";
232 /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
233 qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
238 ieee80211-freq-limit = <5170000 5350000>;
239 /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
240 qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
246 perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
247 wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
250 reg = <0x00000000 0 0 0 0>;
251 #address-cells = <3>;
257 compatible = "qcom,ath10k";
259 reg = <0x00010000 0 0 0 0>;
260 ieee80211-freq-limit = <5470000 5875000>;
261 /* Uses the reference BDF */