target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
   3  * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
   4  *
   5  * Permission to use, copy, modify, and/or distribute this software for any
   6  * purpose with or without fee is hereby granted, provided that the above
   7  * copyright notice and this permission notice appear in all copies.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16  *
  17  */
  18
  19 #include "qcom-ipq4019.dtsi"
  20 #include <dt-bindings/gpio/gpio.h>
  21 #include <dt-bindings/input/input.h>
  22 #include <dt-bindings/soc/qcom,tcsr.h>
  23
  24 / {
  25         model = "Compex WPJ428";
  26         compatible = "compex,wpj428";
  27
  28         soc {
  29                 rng@22000 {
  30                         status = "okay";
  31                 };
  32
  33                 mdio@90000 {
  34                         status = "okay";
  35                         pinctrl-0 = <&mdio_pins>;
  36                         pinctrl-names = "default";
  37                         reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
  38                         reset-delay-us = <2000>;
  39                 };
  40
  41                 ess-psgmii@98000 {
  42                         status = "okay";
  43                 };
  44
  45                 tcsr@194b000 {
  46                         /* select hostmode */
  47                         compatible = "qcom,tcsr";
  48                         reg = <0x194b000 0x100>;
  49                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  50                         status = "okay";
  51                 };
  52
  53                 tcsr@1949000 {
  54                         compatible = "qcom,tcsr";
  55                         reg = <0x1949000 0x100>;
  56                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  57                 };
  58
  59                 ess_tcsr@1953000 {
  60                         compatible = "qcom,tcsr";
  61                         reg = <0x1953000 0x1000>;
  62                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  63                 };
  64
  65                 tcsr@1957000 {
  66                         compatible = "qcom,tcsr";
  67                         reg = <0x1957000 0x100>;
  68                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  69                 };
  70
  71                 usb2: usb2@60f8800 {
  72                         status = "okay";
  73                 };
  74
  75                 usb3: usb3@8af8800 {
  76                         status = "okay";
  77                 };
  78
  79                 crypto@8e3a000 {
  80                         status = "okay";
  81                 };
  82
  83                 watchdog@b017000 {
  84                         status = "okay";
  85                 };
  86
  87                 ess-switch@c000000 {
  88                         switch_lan_bmp = <0x10>;
  89                         switch_wan_bmp = <0x20>;
  90
  91                         status = "okay";
  92                 };
  93
  94                 edma@c080000 {
  95                         status = "okay";
  96                 };
  97         };
  98
  99         keys {
 100                 compatible = "gpio-keys";
 101
 102                 reset {
 103                         label = "reset";
 104                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 105                         linux,code = <KEY_RESTART>;
 106                 };
 107         };
 108
 109         aliases {
 110                 led-boot = &status;
 111                 led-failsafe = &status;
 112                 led-upgrade = &status;
 113         };
 114
 115         leds {
 116                 compatible = "gpio-leds";
 117
 118                 status: rss4 {
 119                         label = "green:rss4";
 120                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 121                 };
 122
 123                 rss3 {
 124                         label = "green:rss3";
 125                         gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 126                 };
 127         };
 128
 129         beeper: beeper {
 130                 compatible = "gpio-beeper";
 131                 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 132         };
 133 };
 134
 135 &tlmm {
 136         mdio_pins: mdio_pinmux {
 137                 mux_1 {
 138                         pins = "gpio53";
 139                         function = "mdio";
 140                         bias-pull-up;
 141                 };
 142
 143                 mux_2 {
 144                         pins = "gpio52";
 145                         function = "mdc";
 146                         bias-pull-up;
 147                 };
 148         };
 149
 150         serial_pins: serial_pinmux {
 151                 mux {
 152                         pins = "gpio60", "gpio61";
 153                         function = "blsp_uart0";
 154                         bias-disable;
 155                 };
 156         };
 157
 158         spi_0_pins: spi_0_pinmux {
 159                 pin {
 160                         function = "blsp_spi0";
 161                         pins = "gpio55", "gpio56", "gpio57";
 162                         drive-strength = <12>;
 163                         bias-disable;
 164                 };
 165                 pin_cs {
 166                         function = "gpio";
 167                         pins = "gpio54";
 168                         drive-strength = <2>;
 169                         bias-disable;
 170                         output-high;
 171                 };
 172         };
 173 };
 174
 175 &blsp_dma {
 176         status = "okay";
 177 };
 178
 179 &blsp1_spi1 {
 180         pinctrl-0 = <&spi_0_pins>;
 181         pinctrl-names = "default";
 182         status = "okay";
 183         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 184
 185         m25p80@0 {
 186                 compatible = "jedec,spi-nor";
 187                 reg = <0>;
 188                 spi-max-frequency = <24000000>;
 189
 190                 partitions {
 191                         compatible = "fixed-partitions";
 192                         #address-cells = <1>;
 193                         #size-cells = <1>;
 194
 195                         partition0@0 {
 196                                 label = "0:SBL1";
 197                                 reg = <0x00000000 0x00040000>;
 198                                 read-only;
 199                         };
 200                         partition1@40000 {
 201                                 label = "0:MIBIB";
 202                                 reg = <0x00040000 0x00020000>;
 203                                 read-only;
 204                         };
 205                         partition2@60000 {
 206                                 label = "0:QSEE";
 207                                 reg = <0x00060000 0x00060000>;
 208                                 read-only;
 209                         };
 210                         partition3@c0000 {
 211                                 label = "0:CDT";
 212                                 reg = <0x000c0000 0x00010000>;
 213                                 read-only;
 214                         };
 215                         partition4@d0000 {
 216                                 label = "0:DDRPARAMS";
 217                                 reg = <0x000d0000 0x00010000>;
 218                                 read-only;
 219                         };
 220                         partition5@e0000 {
 221                                 label = "0:APPSBLENV"; /* uboot env*/
 222                                 reg = <0x000e0000 0x00010000>;
 223                                 read-only;
 224                         };
 225                         partition5@f0000 {
 226                                 label = "0:APPSBL"; /* uboot */
 227                                 reg = <0x000f0000 0x00080000>;
 228                                 read-only;
 229                         };
 230                         partition5@170000 {
 231                                 label = "0:ART";
 232                                 reg = <0x00170000 0x00010000>;
 233                                 read-only;
 234                                 compatible = "nvmem-cells";
 235                                 #address-cells = <1>;
 236                                 #size-cells = <1>;
 237
 238                                 precal_art_1000: precal@1000 {
 239                                         reg = <0x1000 0x2f20>;
 240                                 };
 241
 242                                 precal_art_5000: precal@5000 {
 243                                         reg = <0x5000 0x2f20>;
 244                                 };
 245                         };
 246                         partition6@180000 {
 247                                 compatible = "denx,fit";
 248                                 label = "firmware";
 249                                 reg = <0x00180000 0x01e80000>;
 250                         };
 251                 };
 252         };
 253 };
 254
 255 &blsp1_uart1 {
 256         pinctrl-0 = <&serial_pins>;
 257         pinctrl-names = "default";
 258         status = "okay";
 259 };
 260
 261 &cryptobam {
 262         status = "okay";
 263 };
 264
 265 &gmac0 {
 266         qcom,phy_mdio_addr = <4>;
 267         qcom,poll_required = <1>;
 268         qcom,forced_speed = <1000>;
 269         qcom,forced_duplex = <1>;
 270         vlan_tag = <2 0x20>;
 271 };
 272
 273 &gmac1 {
 274         qcom,phy_mdio_addr = <3>;
 275         qcom,poll_required = <1>;
 276         qcom,forced_speed = <1000>;
 277         qcom,forced_duplex = <1>;
 278         vlan_tag = <1 0x10>;
 279 };
 280
 281 &usb3_ss_phy {
 282         status = "okay";
 283 };
 284
 285 &usb3_hs_phy {
 286         status = "okay";
 287 };
 288
 289 &usb2_hs_phy {
 290         status = "okay";
 291 };
 292
 293 &wifi0 {
 294         status = "okay";
 295         nvmem-cell-names = "pre-calibration";
 296         nvmem-cells = <&precal_art_1000>;
 297 };
 298
 299 &wifi1 {
 300         status = "okay";
 301         nvmem-cell-names = "pre-calibration";
 302         nvmem-cells = <&precal_art_5000>;
 303 };