1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "EnGenius ENS620EXT";
10 compatible = "engenius,ens620ext";
13 device_type = "memory";
14 reg = <0x80000000 0x10000000>;
19 led-failsafe = &power;
34 compatible = "qcom,tcsr";
35 reg = <0x1949000 0x100>;
36 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
40 compatible = "qcom,tcsr";
41 reg = <0x1953000 0x1000>;
42 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
46 compatible = "qcom,tcsr";
47 reg = <0x1957000 0x100>;
48 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
69 compatible = "gpio-keys";
73 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
74 linux,code = <KEY_WPS_BUTTON>;
79 compatible = "gpio-leds";
82 label = "ens620ext:amber:power";
83 gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
87 label = "ens620ext:green:lan1";
88 gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
92 label = "ens620ext:green:lan2";
93 gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
97 label = "ens620ext:green:wlan2G";
98 gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
102 label = "ens620ext:green:wlan5G";
103 gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
117 serial_pins: serial_pinmux {
119 pins = "gpio60", "gpio61";
120 function = "blsp_uart0";
125 spi_0_pins: spi_0_pinmux {
127 function = "blsp_spi0";
128 pins = "gpio55", "gpio56", "gpio57";
129 drive-strength = <12>;
136 drive-strength = <2>;
143 &blsp1_spi1 { /* BLSP1 QUP1 */
144 pinctrl-0 = <&spi_0_pins>;
145 pinctrl-names = "default";
147 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
150 #address-cells = <1>;
152 compatible = "jedec,spi-nor";
154 spi-max-frequency = <50000000>;
158 compatible = "fixed-partitions";
159 #address-cells = <1>;
164 reg = <0x00000000 0x00040000>;
169 reg = <0x00040000 0x00020000>;
174 reg = <0x00060000 0x00060000>;
179 reg = <0x000c0000 0x00010000>;
184 reg = <0x000d0000 0x00010000>;
188 label = "APPSBLENV"; /* uboot env*/
189 reg = <0x000e0000 0x00010000>;
193 label = "APPSBL"; /* uboot */
194 reg = <0x000f0000 0x00090000>;
199 reg = <0x00180000 0x00010000>;
203 compatible = "denx,fit";
205 reg = <0x00190000 0x14d0000>;
209 reg = <0x01660000 0x008f0000>;
213 label = "u-boot-env";
214 reg = <0x01f50000 0x00010000>;
218 label = "userconfig";
219 reg = <0x01f60000 0x000a0000>;
227 pinctrl-0 = <&serial_pins>;
228 pinctrl-names = "default";
246 qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
251 qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";