1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
3 * Permission to use, copy, modify, and/or distribute this software for any
4 * purpose with or without fee is hereby granted, provided that the above
5 * copyright notice and this permission notice appear in all copies.
7 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
8 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
9 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
10 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
11 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
12 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
13 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include "qcom-ipq4019.dtsi"
18 #include "qcom-ipq4019-bus.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
21 #include <dt-bindings/soc/qcom,tcsr.h>
24 model = "AVM FRITZ!Box 4040";
25 compatible = "avm,fritzbox-4040", "qcom,ipq4019";
29 led-failsafe = &flash;
44 compatible = "qcom,tcsr";
45 reg = <0x1949000 0x100>;
46 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
50 compatible = "qcom,tcsr";
51 reg = <0x194b000 0x100>;
52 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
56 compatible = "qcom,tcsr";
57 reg = <0x1953000 0x1000>;
58 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
62 compatible = "qcom,tcsr";
63 reg = <0x1957000 0x100>;
64 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
72 pinctrl-0 = <&serial_pins>;
73 pinctrl-names = "default";
97 qca8075: ess-switch@c000000 {
105 line-name = "enable USB3 power";
106 gpios = <7 GPIO_ACTIVE_HIGH>;
117 compatible = "gpio-keys";
121 gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
122 linux,code = <KEY_RFKILL>;
127 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
128 linux,code = <KEY_WPS_BUTTON>;
133 compatible = "gpio-leds";
136 label = "fritz4040:green:wlan";
137 gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
141 label = "fritz4040:red:info";
142 gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
147 label = "fritz4040:green:wan";
148 gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
152 label = "fritz4040:green:power";
153 gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
157 label = "fritz4040:green:lan";
158 gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
162 label = "fritz4040:amber:info";
163 gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
169 serial_pins: serial_pinmux {
171 pins = "gpio60", "gpio61";
172 function = "blsp_uart0";
177 spi_0_pins: spi_0_pinmux {
179 function = "blsp_spi0";
180 pins = "gpio55", "gpio56", "gpio57";
181 drive-strength = <12>;
188 drive-strength = <2>;
203 &spi_0 { /* BLSP1 QUP1 */
204 pinctrl-0 = <&spi_0_pins>;
205 pinctrl-names = "default";
207 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
210 compatible = "jedec,spi-nor";
211 #address-cells = <1>;
214 spi-max-frequency = <24000000>;
219 compatible = "fixed-partitions";
220 #address-cells = <1>;
225 reg = <0x00000000 0x00040000>;
230 reg = <0x00040000 0x00020000>;
235 reg = <0x00060000 0x00060000>;
240 reg = <0x000c0000 0x00010000>;
245 reg = <0x000d0000 0x00010000>;
249 label = "APPSBLENV"; /* uboot env - empty */
250 reg = <0x000e0000 0x00010000>;
254 label = "urlader"; /* APPSBL */
255 reg = <0x000f0000 0x0002dc000>;
259 /* make a backup of this partition! */
260 label = "urlader_config";
261 reg = <0x0011dc00 0x00002400>;
266 reg = <0x00120000 0x00080000>;
271 reg = <0x001a0000 0x00080000>;
276 reg = <0x00220000 0x00080000>;
281 reg = <0x002a0000 0x01c60000>;
283 partition12@1f00000 {
285 reg = <0x01f00000 0x00100000>;