1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
3 * Permission to use, copy, modify, and/or distribute this software for any
4 * purpose with or without fee is hereby granted, provided that the above
5 * copyright notice and this permission notice appear in all copies.
7 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
8 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
9 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
10 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
11 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
12 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
13 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include "qcom-ipq4019.dtsi"
18 #include "qcom-ipq4019-bus.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
21 #include <dt-bindings/soc/qcom,tcsr.h>
24 model = "AVM FRITZ!Box 4040";
25 compatible = "avm,fritzbox-4040", "qcom,ipq4019";
29 led-failsafe = &flash;
35 #address-cells = <0x1>;
40 reg = <0x87e00000 0x080000>;
45 reg = <0x87e80000 0x180000>;
60 compatible = "qcom,tcsr";
61 reg = <0x1949000 0x100>;
62 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
66 compatible = "qcom,tcsr";
67 reg = <0x194b000 0x100>;
68 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
72 compatible = "qcom,tcsr";
73 reg = <0x1953000 0x1000>;
74 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
78 compatible = "qcom,tcsr";
79 reg = <0x1957000 0x100>;
80 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
88 pinctrl-0 = <&serial_pins>;
89 pinctrl-names = "default";
113 qca8075: ess-switch@c000000 {
121 line-name = "enable USB3 power";
122 gpios = <7 GPIO_ACTIVE_HIGH>;
133 compatible = "gpio-keys";
137 gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
138 linux,code = <KEY_RFKILL>;
143 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
144 linux,code = <KEY_WPS_BUTTON>;
149 compatible = "gpio-leds";
152 label = "fritz4040:green:wlan";
153 gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
157 label = "fritz4040:red:info";
158 gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
163 label = "fritz4040:green:wan";
164 gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
168 label = "fritz4040:green:power";
169 gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
173 label = "fritz4040:green:lan";
174 gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
178 label = "fritz4040:amber:info";
179 gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
185 serial_pins: serial_pinmux {
187 pins = "gpio60", "gpio61";
188 function = "blsp_uart0";
193 spi_0_pins: spi_0_pinmux {
195 function = "blsp_spi0";
196 pins = "gpio55", "gpio56", "gpio57";
197 drive-strength = <12>;
204 drive-strength = <2>;
219 &spi_0 { /* BLSP1 QUP1 */
220 pinctrl-0 = <&spi_0_pins>;
221 pinctrl-names = "default";
223 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
226 compatible = "jedec,spi-nor";
227 #address-cells = <1>;
230 spi-max-frequency = <24000000>;
235 compatible = "fixed-partitions";
236 #address-cells = <1>;
241 reg = <0x00000000 0x00040000>;
246 reg = <0x00040000 0x00020000>;
251 reg = <0x00060000 0x00060000>;
256 reg = <0x000c0000 0x00010000>;
261 reg = <0x000d0000 0x00010000>;
265 label = "APPSBLENV"; /* uboot env - empty */
266 reg = <0x000e0000 0x00010000>;
270 label = "urlader"; /* APPSBL */
271 reg = <0x000f0000 0x0002dc000>;
275 /* make a backup of this partition! */
276 label = "urlader_config";
277 reg = <0x0011dc00 0x00002400>;
282 reg = <0x00120000 0x00080000>;
287 reg = <0x001a0000 0x00080000>;
292 reg = <0x00220000 0x00080000>;
297 reg = <0x002a0000 0x01c60000>;
299 partition12@1f00000 {
301 reg = <0x01f00000 0x00100000>;