1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
3 * Permission to use, copy, modify, and/or distribute this software for any
4 * purpose with or without fee is hereby granted, provided that the above
5 * copyright notice and this permission notice appear in all copies.
7 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
8 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
9 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
10 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
11 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
12 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
13 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include "qcom-ipq4019.dtsi"
18 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/input/input.h>
20 #include <dt-bindings/soc/qcom,tcsr.h>
23 model = "ASUS RT-AC58U";
24 compatible = "asus,rt-ac58u", "qcom,ipq4019";
27 device_type = "memory";
28 reg = <0x80000000 0x8000000>;
33 led-failsafe = &power;
48 compatible = "qcom,tcsr";
49 reg = <0x1949000 0x100>;
50 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
54 compatible = "qcom,tcsr";
55 reg = <0x194b000 0x100>;
56 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
60 compatible = "qcom,tcsr";
61 reg = <0x1953000 0x1000>;
62 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
66 compatible = "qcom,tcsr";
67 reg = <0x1957000 0x100>;
68 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
76 pinctrl-0 = <&serial_pins>;
77 pinctrl-names = "default";
91 qcom,ath10k-calibration-variant = "RT-AC58U";
96 qcom,ath10k-calibration-variant = "RT-AC58U";
113 compatible = "gpio-keys";
117 gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
118 linux,code = <KEY_RESTART>;
123 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
124 linux,code = <KEY_WPS_BUTTON>;
129 compatible = "gpio-leds";
132 label = "rt-ac58u:blue:status";
133 gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
137 label = "rt-ac58u:blue:wan";
138 gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
142 label = "rt-ac58u:blue:wlan2G";
143 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
147 label = "rt-ac58u:blue:wlan5G";
148 gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
152 label = "rt-ac58u:blue:usb";
153 gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
157 label = "rt-ac58u:blue:lan";
158 gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
172 serial_pins: serial_pinmux {
174 pins = "gpio60", "gpio61";
175 function = "blsp_uart0";
180 spi_0_pins: spi_0_pinmux {
182 function = "blsp_spi0";
183 pins = "gpio55", "gpio56", "gpio57";
184 drive-strength = <12>;
190 pins = "gpio54", "gpio59";
191 drive-strength = <2>;
198 &spi_0 { /* BLSP1 QUP1 */
199 pinctrl-0 = <&spi_0_pins>;
200 pinctrl-names = "default";
202 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
203 <&tlmm 59 GPIO_ACTIVE_HIGH>;
206 #address-cells = <1>;
209 * U-boot looks for "n25q128a11" node,
210 * if we don't have it, it will spit out the following warning:
211 * "ipq: fdt fixup unable to find compatible node".
213 compatible = "jedec,spi-nor";
215 linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
216 spi-max-frequency = <24000000>;
219 compatible = "fixed-partitions";
220 #address-cells = <1>;
225 reg = <0x00000000 0x00040000>;
230 reg = <0x00040000 0x00020000>;
235 reg = <0x00060000 0x00060000>;
240 reg = <0x000c0000 0x00010000>;
245 reg = <0x000d0000 0x00010000>;
249 label = "APPSBLENV"; /* uboot env*/
250 reg = <0x000e0000 0x00010000>;
254 label = "APPSBL"; /* uboot */
255 reg = <0x000f0000 0x00080000>;
260 reg = <0x00170000 0x00010000>;
263 /* 0x00180000 - 0x00200000 unused */
268 #address-cells = <1>;
270 compatible = "spinand,mt29f";
272 spi-max-frequency = <24000000>;
275 compatible = "fixed-partitions";
276 #address-cells = <1>;
281 reg = <0x00000000 0x08000000>;